Install Electronic Deadbolt Door Lock - DEFIANT

[@michellesuarez2257]

Thank you so much for this! I needed this for my safety and peace of mind after a bad break up. I just bought this house and I don’t have friends or family here. I doubted that I could do it alone but with your amazing video I have confidence in myself again!

[@lorla5236]

Thank You! Im the type of learner that does better by seeing than reading manuals. Im now excited to do this tomorrow. Great demo!

[@laurenmoreno6549]

I was so overwhelmed by the instructions...watching this video helped so much! Thank you!

[@apk979]

thank you so much. This made my installation so much easier. The paper instructions that came with were terrible but your video was great. Thank you again

[@randyw4984]

OMG, thank you so much, I would have obsessively studied the paper work. you walked me through PERFECTLY! I am subscribing, you explained without making me annoyed with fumbling around !!! PERFECTO!!!😁

[@mariem1961]

Thanks, I was forgetting to press the red inside button to program my user code… finally works … Gratitude 🙏

[@carlydoehler2291]

Thank you. The directions it came with were ridiculous. This was so helpful!

[@corama0728]

I'm going to attempt this tomorrow. Great video with clear instructions. Thank you!

[@roryoleary4117]

Thanks man - this was way easier than navigating their terrible instructions.

[@mrzoilocarlos]

thanks, in the manual it's a lot harder to understand. video instructions are the best 👍🙂🙏

[@adamfhinojosa]

The video is very informational and made installation easy. Thank you for your assistance. Keep making DIY videos.

[@teresahgannon525]

Thank you for posting this video. I was able to install the lock myself and it actually works!

[@RareDivineBeing]

Thank you for sharing this my lock is installed💯💯💥💥

[@irishbearsfan12]

First home DIY with vid help. Success definitely HAVE to put black bolts in to secure plate 1st or itll be all wobbly. Thanks again keep up the good work

[@benrutherford2567]

Great video. I’m moving the lock to a different door but it’s a different swing. How do I change the lock unlock direction? On the new door hitting the lock button opens the lock. Thanks!

[@Toyiamichelle]

Thanks. The directions weren't enough, so glad I found this!

[@tsaul9512]

Thank you for making the deadbolt simple and easy too programmable.

[@kenzhen4298]

Hi I bought the same smart lock as your. After I finished installation, can not smoothly move the latch to work . Do you think we need to find right size or left size lock to fix the door situation?

[@jesseslab]

Excellent video. Super helpful and way easier than trying to read the instructions.

[@dial2fast]

Thanks for your comment!

[@patb6929]

i had this installed with home security few days ago, takes while to figure, understand everything, so you press the lock button on keypad to lock door and to unlock the door you press the code and lock button? also can you lock door with key when leave

[@jzxwood]

Great Review and Install video 👍

[@Jflowboston1]

I just intalled one of those, good video

[@dial2fast]

Thanks for your comment!

[@youssefbelgazem6514]

J Flow

[@louiseede8858]

Thank you so much. You saved me lots of trouble!

[@amarat3863]

battery life? how long with constant use? say 20x a day? will battery last?

[@justin3930]

Thank you. Been wanting to change my code for many years

[@dajhagirl]

Thanks. Does the lock have a auto lock feature ?

[@james13i]

Hm my flat blade is on a 45 degree angle. Is there anything I can do about it or it’s just a faulty product? 3:41

[@derrickoliver3835]

Thanks 🙏 a million you’re dope!!!

[@angelesgarcia2443]

What about for it to lock on its own on if you forgot to lock

[@CorxiPham]

Very helpful, thank you so much

[@aplainname5849]

will i be able to re-key this lock to my personal keys? or do i have to buy new locks for other entry doors?

[@aryybeezyy]

I’m having trouble taking the battery out the lil lock thing can u help me

[@angemay8900]

Thank you! It worked! :)

[@maggiemae8041]

VERY good video... thank you so much for your help.

[@rafaelrevelez7179]

Gracias por el video! Excelente!!! Saludos desde México Excellent Video!

[@jdmkids7795]

Hello, I had this deadbolt for a year in the garage were the locks are in the right side. My new home in the garage door locks are in the left side now. How can you reset it so it can figure out which way to turn? As of now it's turning the opposite way.

[@brookemariarossi3281]

I am having the same problem. Did you ever find a solution?

[@jfresh74]

Remove one battery and put it back in while holding down the lock button. It will re-calibrate itself and then beep and you're all set.

[@CowenJE]

How about if the door opens to the left, how do you swap the open close .....

[@joshuasantos8298]

Mine is stuck in the direction of the deadbolt…. It does not complete it. Any recommendations???

[@TheArmaniHawk]

How do we go about Factory resetting / resetting the Master Code? I think I changed the Master Code by accident and now nothing is working.

[@deerock6846]

remove the batteries and reinstall 3 of them, as you install the last one press the reset button and release it after the long beep.

[@amazonkee74]

Thank you😊

[@sharpmerciful787]

Oh, I solved it. I just entered the default master code WHILE the electronic component was not inserted into that slot. Then I think it was finally able to complete the installation. Then I tried pressing the lock button, and it started locking, which wasn't possible before. It also helps to make sure that when you lock it, you have to hear a click sound and then try to push it with your fingers to make sure it doesn't move, which means it's working.

[@h.rehaief3567]

thank you very much for the great viedo !!

[@webbethmt]

Thank you! Your video made all the difference for me.

[@elultimomensaje777]

Does it automatically lock?

[@watuzi]

Another nice video to follow. All your videos are very nice home upgrades. Do they have one for the entry door, like the dead bolt and lock as one unit?

[@dial2fast]

+Edmund Mendez Most brands make them for deadbolt, but I have only seen a few electronic locks for the regular door locks and they are expensive.

[@watuzi]

+dial2fast No worries, maybe I'll install one like you got in the garage. Thanks

[@jacknewton661]

Good video thanks

[@shaunnahtalbot1414]

Is it possible to mute this lock? The beeping is very loud

[@glendasue70]

Who knows

[@MDS1213]

Very helpful. Thanks!

[@MagalhaesOtacilio]

I couldn't find how to reverse the drive for left hand door use

[@johnswife]

In the summertime when the weather is VERY hot my deadbolt doesn't detract completely inside during the unlock. When it's cool/cold weather it always detracts. How can I fix it so it works as it should during the hot weather. I live in the south so there is also high humidity in the hot time.

[@sharpmerciful787]

I have installed the keypad. But the problem is everytime I do the instruction to get a new master code, everytime I enter the default mastercode and then press the lock button it's always making the lock go out and in and out and in. It never gives a me a chance the change the master code. What do you think it is? I tried contacting the manufacturer and all they did was try to walk through the steps with me, which was useless. Never tried to tell me what the problem was and how to solve it.

[@monicareynoso9230]

how do you delete the 123456 code after programming

[@kristinakeats4792]

Is it possible to disable the lock temporarily for a party outside where guests will be coming in and out? Couldn't find a way to do it on the instructions. Thanks for help if you know the answer.

[@jimdomoradzki483]

Take the batteries out

[@chiraq4301]

Just don’t press the lock key….

[@clearedhot6146]

Good informative video bro

[@John-hm6sb]

Does it lock automatically after you leave the home after a certain amount of time?

[@dial2fast]

No it does not.

[@LAZYJOHN101]

What's the model of previous lock?the old one? Please

[@JM-nh8yp]

you skipped a step, you didn't show how to set up the 6 digit master code....

[@marlonbatres3165]

Very Helpful! Thank you!

[@happykimtran915]

Mine is programmed and works for a year until now it is not working.. no light and can not used the pin.. it doesn’t light up now ..

[@nova12332]

question, can you use the key to open when its in lock mode? what will happen if i use the key?

[@maryhyarborough4071]

My default code doesn't work not does the master code. Can't clear them out

[@ritaabbinanti4491]

super easy to install, i am 13 and i was able to instal it no problem!

[@kincaidj1994]

Well done

[@Caglehead268]

The question was asked before, but is there a way to completely mute this device?

[@q-_-p.d-_-b]

Yes. It's function 7 in the manual.

[@theyoungdice]

My niece pressed 1 -6 and now she can open my door whenever... I changed my password and reset it but why does the 1-6 numbers still open my door that’s kinda dumb

[@billprinty3697]

Mine is "180°" out...…it spins the wrong way and won't lock/unlock?

[@falconnaw2050]

Very good

[@davidmathews87]

would you consider doing a door securing plate video, i.e. a metal plate that connects the door frame (which is weak) to the nearest stud for a highly resilient entryway

[@obiabunmovictory3689]

Mine is just showing a constant yellow light changed batteries still same thing, any solutions

[@bigdaddyramirez]

Do you have a copy of the manual? I'm trying to change/delete user codes. Thanks

[@dial2fast]

+Ricky-Norma Ramirez Delete all user code: press red button, enter programming code, press lock, 4+0+lock+lockProgram User code: press red button, enter programming code, press lock, 2+0+lock+(new user code)+lock

[@702xRyder]

Nice I just got one on Ebay thanks looks simple

[@starglazed77]

how do we stop the beeping and sounds ?

[@myajocsalon]

informative video. good job!

[@razahassan811]

We ended up exchanging this model for the slimmer version kzbin.infoUgkx0jZ_lGlDVJhDnmagEU8gn47cmfPNlLQU because it was too wide for the only door trim area that made sense to mount it on. However, we should have just noted the dimensions prior to purchasing. Otherwise, we love the doorbell. It works perfectly, and the video is very clear, even at night.

[@bill8939]

well done thank you

[@evataylor7378]

Great instuctional video, thank you! Our unit did not come with the instructions that you are referring to, is there anywhere I can get it on line?

[@robertoilario6919]

Excelente demostración, gracias

[@leneemassey9814]

How do I take the 1234 off?

[@lala4943]

Ugh you make it seem so easy. i am struggling with it now

[@timbronson745]

Good job explaining this, but you forgot to share your personal codes with us!

[@debajyotibardhan007]

battery backup how much time...

[@andreslopez7337]

how can you auto-lock? how long does it take after you shut the door?

[@justaguy7114]

5 sec

[@tonyadean7721]

Please tell me how to set the auto lock. For so reason (probably something I did wrong) mine do not auto lock.

[@bruceurrutia83]

Thank you sir I just install mine

[@jeremiahtolison962]

how do you change it for a left hand swing door?

[@MrFreddiew1]

I think you will find the lock will work that out for itself in the setup, just as mentioned in the video after the code 123456 was entered.

[@yaro-v]

Jeremiah Tolison you need remove the door handle turn it 180 degrees and install it.

[@jefffeenstra1709]

Flip the lock upside down inside the housing( it fits in both ways) and anytime there's an arrow pointing that says up make it point down.

[@tvn75000]

Thanks for your video. It have all the detail I need. Still I don't understand why there are thumb down. If you give a thumb down, there are something wrong with you.

[@j.urbanoramirez2503]

It's the same with the faultless brand here in phils

[@StarringDonell]

Can u put this on your bedroom door?

[@SUPAHSPIFFY]

I did lol no regrets

[@CLYX-Kronos]

Starring Donell i

[@Kozette007]

I did

[@boobizzy4173]

Henritooo lmaoooo

[@Koladjokaj]

I have one from eBay it’s a wrong size ,has to be a left or right I think that’s no option when I purchaset

[@bhnatiwful]

what do you do if youve lost the programming code?

[@q-_-p.d-_-b]

Use a paperclip or pen and hit the reset button.

[@franzfms86]

What if the burglar is inside, can he or she unlock from the inside?

[@sukhivaid34]

Awesome Job.

[@sharpmerciful787]

Every time I punch in the default master code, it's always thinking that I'm trying to change the bolt directions setting. It never lets me change the master code.

[@chris-ot4og]

Good video.

[@dustinpool]

how do you get rid of the default code 123456.. I tried what was in one of the comments: press red button, enter programming code, press lock, 4+0+lock+lockProgram User code: press red button, enter programming code, press lock, 2+0+lock+(new user code)+lock but when I try the default code it still opens it? any advice?

[@dustinpool]

I just figured it out .. press red button , enter program code, press lock, 1+ 0 lock , once you do that program your NEW PROGRAM CODE, this will replace the default 123456 code. when you press 2+0 thats how you add additional codes to either existing or new program code. hope that helps

[@patrickhobbins1783]

dustinpool

[@jimdomoradzki483]

You must change the password code PC because everyone knows the password code on a new lock is 123456 and it can open the lock. Of course you must also enter a usercode UC to open your lock.

[@upallnight888]

You should get the new cylinder re-keyed to your old lock so that you don't need to make a bunch of new keys

[@Getsomevagisilfordat]

Doesn't that mean someone wanting to get in could just find the brand name, then find a video such as this, use the reprogramming code like shown and just make a backdoor for themselves?

[@deneavazquez7013]

How do I delete 1-2-3-4-5-6

[@nicolewalters1501]

my lock just stopped working and the lock button is just red, on top of everything else my keys are not working

[@timyassa4343]

what about the key?