Tap to unmute

Diesel-Powered Hydraulic Power Pack i made

  Рет қаралды 317,094

M. Bjoernstroem

M. Bjoernstroem

Күн бұрын

Пікірлер
@rickerb7196
@rickerb7196 Жыл бұрын
You are about the most professionally looking outcome fabricator I've seen in 73 years!! Well done!
@mikeg3893
@mikeg3893 11 ай бұрын
Except for not wearing safety glasses while using a hole saw and getting his jacket so close to the hole saw!!
@xtender5
@xtender5 4 ай бұрын
@@mikeg3893 Safety third. Unless someone is watching.
@EnGammalAmazon
@EnGammalAmazon Ай бұрын
You can make that 74 years here!
@bobsimony9178
@bobsimony9178 Жыл бұрын
For a guy who says he is not much of a planner - it looks like you always have a plan! Enjoy watching you create and I like the countryside.
@DMSparky
@DMSparky Жыл бұрын
Always enjoyable to watch a talented fabricator work.
@jonnafry
@jonnafry Жыл бұрын
Cool porta-power unit ... especially when towable by the quad. Very enjoyable 53 minutes and 50 seconds ... cheers.
@M.BJOERNSTROEM
@M.BJOERNSTROEM Жыл бұрын
Thanks for watching!
@chuckjames1943
@chuckjames1943 Жыл бұрын
This is a great looking power pack. Made up of very good components. It will serve you well for years.
@jamesoliver6625
@jamesoliver6625 Жыл бұрын
Frame the entire trailer in square tube and then panel the four sides with hinged panels that will fold 270º to lay on the top for maintenance access/weather protection. The side panels may need to hinge in the middle so they both can be opened at once. Just a thought.
@quietbrianquiet
@quietbrianquiet Жыл бұрын
Thank you for the great camera shot as always. The drone shots are beautiful. You can get diesel algae treatment and add it to the fuel of a unit that is sitting for a long time. That looked like algae to me. Thank You.
@M.BJOERNSTROEM
@M.BJOERNSTROEM Жыл бұрын
Thanks, will look into that!
@wirenut003
@wirenut003 Жыл бұрын
Very good use of old, not needed equipment for use as a multi-use machine.
@EverythingButMusic-gv8jy
@EverythingButMusic-gv8jy 3 ай бұрын
Love it that you leave the bit when you and the trailer start sliding down the hill in your video. Your videos are great by the way.
@andrewcooper8980
@andrewcooper8980 Жыл бұрын
This another great idea you’ve had. If it saves the pump on your skid steer and any other equipment makes total sense
@andythorne1261
@andythorne1261 Жыл бұрын
that's a very useful as there are many types of hydraulic tools and equipment you can run from that
@tantalus8991
@tantalus8991 Жыл бұрын
I was hoping to see an attempt to draw a turtle and hare for the throttle! LOL. Great job as always!
@M.BJOERNSTROEM
@M.BJOERNSTROEM Жыл бұрын
Drawing is not my thing, i would probably just confuse myself in the future..
@Roy-l7v
@Roy-l7v Жыл бұрын
Nice job as always. From a simple design to a master piece.
@DanKoning777
@DanKoning777 Жыл бұрын
I sure it's not easy, but I wish you created more videos. I just found your channel and immediately subscribed, but I'm already getting close to having watched everything. It's also not easy finding great videos like this-those w/o a cuss word every 2 mins. or head banging metal music. God bless.
@niklasadams30
@niklasadams30 Жыл бұрын
Thank you for your Videos,keep going !
@M.BJOERNSTROEM
@M.BJOERNSTROEM Жыл бұрын
Thank you, will do!
@raytalbot5890
@raytalbot5890 Жыл бұрын
Stripping the two machines down would have been a good video 👍👍🇬🇧🇬🇧
@ritchieblackmore5204
@ritchieblackmore5204 Жыл бұрын
Hi loving your videos, I see you changed the oil and fuel filters on my birthday 👍🏴󠁧󠁢󠁥󠁮󠁧󠁿🇬🇧
@Ricko65
@Ricko65 Жыл бұрын
I just subscribed to your channel - I did this because your workmanship and craftmanship are fantastic!!! Thank you for the AWESOME content.
@kellygb9278
@kellygb9278 Жыл бұрын
To say that I am impressed would be an understatement! - Well done on all fronts
@b.malnit8983
@b.malnit8983 Жыл бұрын
I like how you overbuild everything..
@pieter-van-loon
@pieter-van-loon Жыл бұрын
This guy is (becoming) a legend! Fantastic youtube channel
@Timothy-lb2vr
@Timothy-lb2vr Жыл бұрын
That is a mighty big vise you have there!!!
@carlf8291
@carlf8291 Жыл бұрын
Love to see the rock crusher working in a video.
@keithsilva6330
@keithsilva6330 Жыл бұрын
Nice show with awesome content... Film-maker, Truck-driver, Shop-Tech,, Equipt Design Engineer, Land owner, Powder monkey, Contractor to name a few.. Thats alot of hats. All presented by a guy who comes across 😎and Low-key... 👍🙌
@ErikSkov-um2jv
@ErikSkov-um2jv Жыл бұрын
You never see a problem, only solutions, nice job
@marriagepartnersministry5942
@marriagepartnersministry5942 11 ай бұрын
When I think of all the money spent on machinery, fuel, wear and tear, then I think of all the time spent to cut wood, build machines, service machines, process into firewood, haul the wood, load fireburner constantly, it makes me wonder if there was any savings on the fuel bill in comparison. It might be kind of mildly enjoyable to work on stuff but I would rather get the house heated with no effort and spend my free time doing something GREATLY enjoyable like fishing, hunting, snowmobiling, and the like. I'm not disparaging this guy at all, what he does is very impressive.
@Aaronsx8px4ki3z
@Aaronsx8px4ki3z 5 ай бұрын
great video definetly another Andrew Camarata i like the way you can get parts of other scrapped machines and reuse them to make others great
@dennisal1481
@dennisal1481 Жыл бұрын
Hi, i want to give a tip about the engine. Let it heat up before you ref it up. Otherwise it will have a short live. And i would place a valve under the diesel tank. So you can close it. Nice video though thanks.
@M.BJOERNSTROEM
@M.BJOERNSTROEM Жыл бұрын
Hi, it is heated up before revving, i just edit that out. Thanks!
@TheVitorgoncalves
@TheVitorgoncalves Жыл бұрын
Comgratulations .....you are the NEW MacGyver of the Millennium ....good job...
@SANTANNA007
@SANTANNA007 Жыл бұрын
Brother What a sensational video you doing this job as a MECHANIC and inventing some adaptations, by the way I am a mechanic here in Brazil and I like it a lot too, and this wood cutting machine is too top, the danger and you putting your hand in when it is going to split the wood , be very careful about that ae ....
@ShaneCDixon
@ShaneCDixon Жыл бұрын
Very cool project with a multitude of uses!
@BarnStangz
@BarnStangz Жыл бұрын
Always enjoy your content! I can't believe that I forgot to watch this one! I like how meticulous you are with things. Never any shortcuts, it's nice to see. Like the music too.
@horstszibulski19
@horstszibulski19 Жыл бұрын
Sounds like the diesel is running into the rev limiter, maybe some small adjustments on the injection pump could help with that. For the cover I would try ro get a canyas/tarp like one on the small trailers, doesn't weigh too much and keeps the power pack nice and dry, as long as it's standing on the job site... Thx for showing, great to watch! 👍👍👍
@Larry-325
@Larry-325 Жыл бұрын
Nice video. Great portable unit to have. Nice job!👍👍👍
@M.BJOERNSTROEM
@M.BJOERNSTROEM Жыл бұрын
Thanks!
@everestyeti
@everestyeti Жыл бұрын
Another brilliant idea, have you thought about adding a generator output so that if needed you have a power source aswell? Obviously I don't have a clue how to do it myself but am sure it's something you can do. 👍🤗
@M.BJOERNSTROEM
@M.BJOERNSTROEM Жыл бұрын
Been thinking about putting a generator and a air compressor, so i can use it as a service wagon.
@jondavidmcnabb
@jondavidmcnabb Жыл бұрын
Love watching you work. Maybe make a cover out of cheap aluminum channel and corrugated plastic sheet??
@DMSparky
@DMSparky Жыл бұрын
You should get a cover for the area at the front of the trailer. Cover the valves and dashboard thing.
@Thisguyisthelimit
@Thisguyisthelimit Жыл бұрын
This is realy enjoyable to see. The way you get everything to work and function the right way. It feels bad (in some way) to call you for beeing a backyardengineer thus because your very professional way to get everything together. I like your way of thinking. Things you do seem to work better than just good. A little development process in some areas will be needed maybe but some stuff has to be seen working before that happens. My favourite machine of yours is the firewoodplant. Many functions in one machine. Tack för fina videos.
@EnGammalAmazon
@EnGammalAmazon Ай бұрын
I believe you could speed up your splitting process if you did not cut one piece and split it. You have room to cut one piece, back up, move the log forward, and make the second cut. This way the second piece would drop in behind the first piece and push the first piece through the knife as you back up to bring the third piece into the cutting position. You would cut your stroke time in half this way. For cleaning the entire fuel system, put about 500 ml of ATF in your next couple of tanks of fuel and it will clean out your lines, pump, and injectors. The ATF burns well and it is highly detergent. Great quick, temporary hose repair with the shrink tubing. And, as always, a very good video. I was going to ask you how far away from a large town are you. It seems that you can get parts and supplies quite quickly. That is a real asset in what you are doing. I'm about an hour from Sundsvall and 40 minutes from Hudiksvall. If I can't find what I want in those two towns, I probably don't need it.
@hollandduck79
@hollandduck79 Жыл бұрын
Hello from the Netherlands . a nice pomp trailer project 👍 . maybe also make a special trailer for the wood splitter to put it on if you don't work with it on the skid steer loader . thanks for the video M . Sincerely Hollandduck
@leonvdm
@leonvdm Жыл бұрын
for that fuel line: inside that crimp fitting is a tailpiece, a new (or shortened) hose with a regular hoseclamps can be clamped onto that. next time ;)
@teapot_
@teapot_ Жыл бұрын
Well, although the top for it you made is heavy, it will be good protection from rocks when loading the crusher, and general elements. Perhaps try it and see.i know it takes time to film everything but its obviously worthwhile and there are a great deal of people like me that really appreciate what you do...thanks.
@gingerinventor110
@gingerinventor110 Жыл бұрын
If the big pump has 'pressure compensated control' you could add the smaller pump on the same circuit to increase the flow. You may need a check valve on the big pump pressure line.
@greatstomp
@greatstomp Жыл бұрын
Yay! Finally some rockcrushing video comming up 🥳
@andrewrobinson2869
@andrewrobinson2869 Жыл бұрын
Great video, keep them coming , thank you .
@ranchorelaxo2287
@ranchorelaxo2287 Жыл бұрын
Good job buddy. Might I suggest laying down a piece of cardboard for your next oil change? It is much easier to slide the catch pan and cleaning up is generally easier also. I spill less oil this way. Be well.
@jimDseries
@jimDseries Жыл бұрын
Thanks for this latest video. Can you please show us when you start crushing those rocks.
@M.BJOERNSTROEM
@M.BJOERNSTROEM Жыл бұрын
I will do that
@newzealandfortrump
@newzealandfortrump Жыл бұрын
Your videos are very enjoyable to watch. Thanks 😊
@trashanken
@trashanken Жыл бұрын
The rock crushing part will be very interesting! Will you be sweden's Andrew Camarata now? ;-)
@bobfugazy4916
@bobfugazy4916 Жыл бұрын
Nice work. Beautiful aerial photography of Norway, Sweden, Finland? Keep up the good work.
@TBizzell68
@TBizzell68 Жыл бұрын
Nice! That’s a handy rig. It sounds like the engine is bouncing off of the governor.
@boothienz8021
@boothienz8021 Жыл бұрын
Might need a stronger spring, there are differences between car engines and stationery ones
@mykalmcb
@mykalmcb Жыл бұрын
THat engine fire right off after sitting for 5+ years.
@Dust..
@Dust.. Жыл бұрын
Thats a diesel for ya mate
@wills5482
@wills5482 Жыл бұрын
No carbs to clog and no gasoline to become varnish
@Dust..
@Dust.. Жыл бұрын
@@wills5482 exactly right
@bolla1369
@bolla1369 Жыл бұрын
Avrai dei problemi con il sistema dell'iniezione con quel tipo di motore, motore Lombardini FOX iniettori pompanti, hanno anche problemi sulla cinghia di distribuzione e pompa acqua, non per niente quel motore ha contribuito al 80% a mettere in crisi l'azienda e vendendola alla kohler.
@kitecattestecke2303
@kitecattestecke2303 Жыл бұрын
Maybe add some cheap fenders and lights? Much safer if ever used in the road and not slinging stones 360° 😅 Gold project ❤
@WiggglezMr
@WiggglezMr Жыл бұрын
A touch of CA glue really helps keep electrical tape from unraveling later.
@SlickBubbles
@SlickBubbles Жыл бұрын
actually, if he used "Solder Sticks" he wouldn't need the tape and the joint is more secure.
@WiggglezMr
@WiggglezMr Жыл бұрын
@@SlickBubbles i also like those solder heat shrink combos, those things are great.
@Boise30
@Boise30 Жыл бұрын
Yeah, I was surprised he didn’t use a weather pack connector honestly. Electrical tapes is a temporary tool like zip ties.
@vanman5593
@vanman5593 Ай бұрын
beautiful Sweden I love it i must visit 😀😀
@JH-lo9ut
@JH-lo9ut Жыл бұрын
Look for one of those fiberglass hoods that go on covered trailers. Maybe you can get one of those to fit. Seeing your wood cutter/splitter it struck me that the lengt of push/ pull is twice the length of the log stumps. This could be improved. Maybe just let one stump push the next stump onto the wedge.
@mickyfitzko6024
@mickyfitzko6024 Жыл бұрын
Just found your channel and im watching your videos and now im subscribed. cant wait to see more videos!
@BigEightiesNewWave
@BigEightiesNewWave 8 ай бұрын
Love watching Swedes do Swede things. PS, I am a hockey player : )
@gerhardii
@gerhardii 7 ай бұрын
I would add a safety pin lock for the front stand to ensure it does not slip down onto the road while pulling it,!!!!
@Jonas.mf399
@Jonas.mf399 Жыл бұрын
Nice vid❤
@loczek1990
@loczek1990 Жыл бұрын
Great Job!
@gliOrtidiMauro
@gliOrtidiMauro Жыл бұрын
è bello vedere come lavori, per conto mio i video li puoi fare anche di due ore... senza le parti accelerate, sei bravo e attrezzato. complimenti. ciao
@arjanvogel6444
@arjanvogel6444 Жыл бұрын
Thanks for your vid 😇💟💟💟 Love and bless you, you forget to look at the air filter. To bad you never show you read the comments maybe leave some hearts here and there.
@raytalbot5890
@raytalbot5890 Жыл бұрын
To stop wiggle you could put rubber between black key unit & red bar ?? 👍👍🇬🇧🇬🇧
@SM-98
@SM-98 Жыл бұрын
Very nice video, thanks for sharing!
@InquisitiveBaldMan
@InquisitiveBaldMan Жыл бұрын
Get an old leather sofa and make a cover from the leather. Its light to take off when in use then.
@TylerDurden0331
@TylerDurden0331 Жыл бұрын
U R clever and Smart guy. I admire.
@PaulHigginbothamSr
@PaulHigginbothamSr Жыл бұрын
So Hanna pulled the car away frozen to the ground? Living in the Arctic circle makes life so easy. How is your car used for a belt support doing? I see you put a steel backstop for it but the rear window seemed broken. Then pulled it out with a strap through the wheel. Easy to move things with a big excavator. My neighbor got stuck in a snowbank down off Parkhill street. He could have used your excavator but he diddled around with it and got it out. 21:50.
@eby6114
@eby6114 Жыл бұрын
Our diesel over here is yellow. Yours is clear.
@mateuszcelmer6180
@mateuszcelmer6180 Жыл бұрын
at 8:58, who makes that wrench you’re using? never seen one quite like that!
@7eis
@7eis Жыл бұрын
At the regular fuel station pumps in Sweden you get 30% biodiesel. If you have access to a buying 'real' diesel that'll probably save you a headache or two in the long run
@ChotuuSian
@ChotuuSian Жыл бұрын
Good work 👍
@kwinterburn
@kwinterburn Жыл бұрын
Just watched the video , and thought your only cost is diesel , but you have tons and tons of wood waste , it may be worth for a static application like this , making a wood gasifier and running a gas engine on wood gas , you would need to scrub the gas through woodchips to clean the creosote , then a standard petrol engine, either that or a steam engine ideal if you have a use for waste heat is drying wood or heating a house
@PaulHigginbothamSr
@PaulHigginbothamSr Жыл бұрын
Your diesel seems very watery compared to ours. Looks like Rudolf came to visit.
@Bjorn1976
@Bjorn1976 Жыл бұрын
Du lager jo ting akkurat og bedre enn fabrikk 👍 Konge
@barttraynor1220
@barttraynor1220 Жыл бұрын
Very nice 👌
@TheGazmurphy
@TheGazmurphy Жыл бұрын
Very handy
@patrikpersson9446
@patrikpersson9446 Жыл бұрын
Perhaps it is a built in constant rpm regulator inside the dieselpump thats mocking ??? It sounds like it has taken in a smidge of air in the dieselsystem when you start it up??? A bit ruff at first..
@M.BJOERNSTROEM
@M.BJOERNSTROEM Жыл бұрын
Could be!
@Farm_fab
@Farm_fab Жыл бұрын
The broken trailer hub could be used along with the spindle to hold your spare tire. It wouldn't need all the bolts to hold the spare.
@KEYSTONELIGHT69
@KEYSTONELIGHT69 11 ай бұрын
REALLY LIKE YOUR VIDEOS. WHAT KIND OF VISE IS THE ONE YOU USED TO MAKE YOUR BATTERY BRACKET FOR YOUR COMPRESSOR??
@marriagepartnersministry5942
@marriagepartnersministry5942 11 ай бұрын
Im guessing that after 40 miles of vibrating that the jackstand thing will loosen and fall down
@shauldsouza5378
@shauldsouza5378 Жыл бұрын
Hi My friend, With the amount of welding ,grinding and metal work why don't you get or make small portable sand blaster. You have all the necessary equipment to either use it in small scale else large scale sand blasting
@M.BJOERNSTROEM
@M.BJOERNSTROEM Жыл бұрын
Hi, good idea. I've been thinking about making a big one, now when i have a compressor that can handle it.
@Max_Marz
@Max_Marz Жыл бұрын
Have you been happy with that Can-AM ATV? I was gonna get that same model until I saw how much of a nightmare basic services are on it. You gotta take a bunch of plastics off to change the oil right?
@ShainAndrews
@ShainAndrews Жыл бұрын
Where is the water separator for your fuel system? Looks like an algae problem, which is a water problem, which is a fuel storage problem.
@adiifyr1adii615
@adiifyr1adii615 Жыл бұрын
Kjempegod video du har laga glede meg til neste video
@danielson101
@danielson101 7 ай бұрын
is hour meter wire getting ground through paint? mabe when you drilled hole
@TyFreeborn
@TyFreeborn Жыл бұрын
I'm wondering, were you running your wood splitter before off the Takauchi's high-flow (124.9 Lpm) secondary auxiliary circuit hydraulics instead of the slower primary circuit ( only 69.5 Lpm)? If so, maybe you could add a high-flow pump to your new service trailer to boost wood production. Thanks for the awesome content! I've subscribed.
@M.BJOERNSTROEM
@M.BJOERNSTROEM Жыл бұрын
I did use it on high flow with the skid steer, and for the trailer i could connect the 2 gear pumps to reach a higher flow if using this for that. Thanks!
@Spawn303
@Spawn303 Жыл бұрын
Weld two perpendicular blades so it cuts into 4?
@sydneymcconnaughhay5947
@sydneymcconnaughhay5947 Жыл бұрын
Wow great vid...😊
@tomaszellwart7115
@tomaszellwart7115 9 ай бұрын
Hello, could you share video how it is build? Mainly I would like to see how is connected hydraulic pump to engine. Thank you in advance
@chrisbubar6604
@chrisbubar6604 Жыл бұрын
You have a lot of equipment. I really enjoy your videos. How can you afford it all? What is your secret ha ha.
@SteveCaparoni
@SteveCaparoni 6 күн бұрын
"Nothing fancy"... proceeds to build a fancy thing.
@danacampbell-vu2ut
@danacampbell-vu2ut Жыл бұрын
Could you run the crusher off that portable pump instead of that sweeper? 🤔😳👍❤️📹😄
@M.BJOERNSTROEM
@M.BJOERNSTROEM Жыл бұрын
If it had around 40 more HP, it could.
@markiootje
@markiootje Ай бұрын
why not change hole black axle part,do look now all movies back of you
@kristerolsson1795
@kristerolsson1795 Жыл бұрын
Vad har du gjort med takstegen? Tack för en bra film.
@M.BJOERNSTROEM
@M.BJOERNSTROEM Жыл бұрын
Inte den blekaste
@danielson101
@danielson101 7 ай бұрын
put hole for pin in jackstand?
@xtender5
@xtender5 4 ай бұрын
8:39 Dammit, theres no satisfying click.
@Baconbs718
@Baconbs718 3 ай бұрын
Is this how diesel hydraulic locomotive would sound like
@MrBen-uk
@MrBen-uk Ай бұрын
Is the tractor a allow chalmers? Would like to see a video on that and some “Tlc”
@robertberggren8346
@robertberggren8346 Жыл бұрын
There appears to be a small crack in the radiator hose? (34:29)
Installing extra hydraulic function on tractor for a grapple
25:41
M. Bjoernstroem
Рет қаралды 82 М.
Blasting and digging to clear restricted water flow
46:25
M. Bjoernstroem
Рет қаралды 4,2 МЛН
小丑女COCO的审判。#天使 #小丑 #超人不会飞
00:53
超人不会飞
Рет қаралды 16 МЛН
The Best Band 😅 #toshleh #viralshort
00:11
Toshleh
Рет қаралды 22 МЛН
Bought a big Diesel driven Compressor & Generator
1:57:32
M. Bjoernstroem
Рет қаралды 498 М.
Bought a belt loader and modifying it to handle firewood
1:20:52
M. Bjoernstroem
Рет қаралды 686 М.
Buying a truck and doing repairs
1:27:13
M. Bjoernstroem
Рет қаралды 796 М.
Hydraulic power pack - DIY *Subtitles*
22:54
Patryk Trajder
Рет қаралды 542 М.
Making Hydraulic Log Splitter
27:24
Workshop From Scratch
Рет қаралды 19 МЛН
Building a new exhaust for my truck
52:27
M. Bjoernstroem
Рет қаралды 304 М.
4x4 Timber Trailer Build - START to FINISH
1:00:50
Donn DIY
Рет қаралды 6 МЛН
Making Hydraulic Power Unit
16:50
Made in Poland
Рет қаралды 1,9 МЛН
Project 090 | Engine driven hydraulic power unit
13:49
Make it Extreme
Рет қаралды 1,1 МЛН
Building a rock crusher and testing it
3:25:30
M. Bjoernstroem
Рет қаралды 6 МЛН
小丑女COCO的审判。#天使 #小丑 #超人不会飞
00:53
超人不会飞
Рет қаралды 16 МЛН