Installed my superior diff breather kit to the hilux. I hope this video will help or inspire you to take the challenge to do this mod or any mod yourself. hope you guys and girls like this video 🤙🏻 www.superiorengineering.com.au
Пікірлер: 28
@alexanderwebb6802 жыл бұрын
Neat solutions. Really seems like every diff/tc/gear box valve extension job is different. There's always some unique issues. The fittings you used to pair your existing extension hoses to those of the kit was very clever.
@Ozoffroad_2 жыл бұрын
Yeah man unless it’s a specific kit for your car I’d buy everything separately. If I knew it was going to be that much of a pain I would have bought everything from the hose shop and done it for a quarter of the price 😂
@seaney1988 Жыл бұрын
Nice one mate, I am getting my Diff breathers put in next week
@harrisongauci24877 ай бұрын
thanks mate. i dont really know what im doing so this is much appreciated. great video. ill be putting my diff breathers in soon
@Ozoffroad_7 ай бұрын
No worries mate glad I could help 🤙🏻
@carskanay3 жыл бұрын
Do you have any type of cargo holding devices in the rear tray of your Hilux?
@Beyondthebackyard-au2 жыл бұрын
Cheers mate. About to fit mine to my 05 model and thought I'd see what the world of KZbin has to offer for instructions. Should be pretty similar... I hope lol
@Ozoffroad_2 жыл бұрын
Haha yeah hopefully man. I hope it helps you out thanks for commenting and subscribing mate 🤙🏻
@norco.35432 жыл бұрын
hey man, i just started doing my breather kit install on my 2016 n80 SR hilux, just wondering what actual shop did you go down to get the rubber hose fitting and snap lock fitting for the breathers that are on the bell housing?
@Ozoffroad_2 жыл бұрын
Hey mate I went to a place called house of hose. And grab the plastic hose man more durable than rubber 🤙🏻
@DonsShed2 жыл бұрын
Great video man :) It's great that you didn't just edit your mistake out, but let us see what we should not do. Thank you :) Cheers, Don, Perth WA MY22 Fortuner (Dons Shed and Xplor Overland)
@Ozoffroad_2 жыл бұрын
Thanks mate 🤙🏻
@michaelpaul54989 ай бұрын
Thanks for sharing. Appreciate the tips.
@Ozoffroad_9 ай бұрын
No worries 👍🏻
@robertmarshall9308 Жыл бұрын
Awesome video mate helped alot cheers.
@Ozoffroad_ Жыл бұрын
No worries mate I’m glad I could help 🤙🏻
@erkibaumann33682 жыл бұрын
G'day mate, thanks for sharing your install process. You said the 3 lines on top of the bell housing are for the gearbox, transfer case and front diff. I had a look under mine today and it seems like two of those are coming from the transfer case (one for the actuator) and one comes from the gearbox. The front diff breathers (there's 2 of them, one is for the ADD) are actually located under the fuel filter.
@Ozoffroad_2 жыл бұрын
Aww sweet as man I didn’t know haha aww well at least the main ones are extended 🤙🏻 might have to get to them ones another day cheers for the info
@erkibaumann33682 жыл бұрын
@@Ozoffroad_ No worries at all. Unfortunately not a lot of information about this in the owner's or workshop manual and on the internet. Took a fair bit of crawling to figure out what's where. And only then you realize that you don't need half the stuff that came with your vehicle specific kit and need to go out and buy some extra fittings to extend the factory lines.. Might be a good follow up video idea for you
@jameswalker8338 Жыл бұрын
Realise I’m coming a bit late to the party but can you remember the size of the barbs you used for extending the hose? Also did you just push them in or was there an existing clip used to put locking pressure on the barbs. Cheers.
@Ozoffroad_ Жыл бұрын
Hey mate Naar I don’t remember sorry just take an off cut of hose when you get them and I’m pretty sure it was just pushed on and zip tie for a little bit of extra pressure
@ryanhunterful2 жыл бұрын
Hi Oz off-road. I watched another vid where a guy fitted the plastic hose and it melted. He recommended the silicone hoses to prevent this. What’s your thoughts
@Ozoffroad_2 жыл бұрын
Hey mate umm it’s a good preventative but I have had no problem with mine I just made sure it wasn’t to close to anything hot in the end 🤙🏻
@dalephillips82502 жыл бұрын
$150!!! Wow! I did the one in my Tundra for about $25 & ran it right up behind my drivers side taillight.
@Ozoffroad_2 жыл бұрын
Yeah pretty much paying for the brand name 😂
@neillodge9130 Жыл бұрын
Like they say pore man pays twice but great vid though cheers , Neil w.a.
@cosimosanfilippo905010 ай бұрын
I like your video because you are so genuine..!!! :)