Dirtbike Cooling Fan Kit & Radiator Brace Install Video! 2022 Beta 300 Race Edition 2-Stroke

[@damarpo5467]

Really enjoy your videos, just got my 23 300 RR RE

[@3SeasRecreation]

Glad you like them! Thanks for being a subscriber! Enjoy The Ride, Jared

[@dirtbike250xx]

Keep the beta content coming!

[@Coastal-rsidedown]

Thanks for the video. Installed on my 2021 300rr Was a little bit worried about using a rivet after watching the video. Glad the correct rivets were included with the fan kit package. Took a little bit, but managed to find my rivet gun as I hadn't used it in a long, long time. Installation was pretty easy. Still a little concerned if the rivets could cause any damage on the radiator fins. Filled back up with anti-freeze and no leaks so far. Will need to get the bike hot and pressure built up to be 100% certain.

[@3SeasRecreation]

Good Evening! Super excited to hear that our video helped you, that's the goal! You should feel 100% confident in using the rivets that were supplied in the kit. The radiator itself only has a set amount of core channels that run the fluid throughout the radiator, the remainder of the fins are just used as more surface area to help it cool. If you ever need more Beta parts keep us in mind as we drop ship and offer discounts as long as you live within the USA! Thanks, Jared.

[@pepemanolo390]

a very good video thank you sir, a question; I observe that there are many who remove the thermostat and put silicone tubes, ... greetings.

[@michaelburke3655]

Q- it comes with a little metal washer. I just kept the existing rubber washer and disregarded the metal one. Ya think the metal one has anything to do with temp readings?

[@danijelristic6677]

At what degree does the fan turn on and at what degree does it turn off?Thanks

[@TheDweebert]

Thank for the awesome vids..you guys rock! Does this fan kit(or another) fit the 2022 200 Race Edition? Thanks again.

[@3SeasRecreation]

Good morning, thanks for checking out our channel! Yep Beta has a fan kit specific to your bike! Keep in mind that we offer discounts and also free shipping on orders over a certain threshold. Enjoy the ride, Jared

[@arianaclayton]

@@3SeasRecreation Thank you! I'll call you to order one!

[@krazypolak1820]

Thank u so much for the video

[@3SeasRecreation]

Thanks for the positive vibes! Stay tuned for more Beta content! Enjoy the ride, Jared

[@earluke2592]

What i dont like: if that radiator is bend after a crash, then the fan mount and the fan housing will be bend as well, resulting in fan blades scratching on the housing or a stopped fan. There should be rubber mounts that can flex if the radiator is bend.

[@3SeasRecreation]

Yea I suppose that would help, those radiators are pretty tough tho!

[@roncorey7289]

One more reason why I bought a Sherco SE 300 factory. Fan comes on it stock

[@jonnyhumphreys9133]

I didn't think these 300s get hot enough to need a fan unless the jetting is too lean...even in hard enduro. Also, why not go with lateral support? Seems more important than a front grill.

[@3SeasRecreation]

Good evening, we have been using these radiator guards for about 5 years and have been rock solid for us. Drews bike even fell from the sky and it held up. (I'll look for the video of his crash). I think the cooling fans are awesome, not that expensive and give you that added security on those slower muddier rides that the bike is going to be just fine. Thanks, Jared

[@jonnyhumphreys9133]

@@3SeasRecreation do you have a link to the fan kit?

[@3SeasRecreation]

@@jonnyhumphreys9133 If you are interested in a fan kit feel free to call me during our normal shop hours and I can order one for you! I offer discounts on Beta accessories so if you order from me instead of their website it will save you money! Our phone is [phone]. We are east coast and hours are Monday-Friday 10am-6pm and Saturday 9am-4pm. Thanks, Jared

[@3SeasRecreation]

Check out this video of Drew Fortner at the Hard Enduro this spring in Texas putting his rad braces to the test! kzbin.info/www/bejne/m5eli5uArKqknqc

[@rubencruz1938]

hello I subscribe to your Portuguese videos. I like your tips. how to mount fan on a beta 125 rr??

[@specialocciferdoofy]

Ever installed a fan with a race harness kit? Looking for a solution to add a fan while using the race harness wiring loom

[@3SeasRecreation]

Actually have thar exact situation going on in the shop now. We are doing a fan kit with race wire harness on a new 2022 300 RE. I will make a video on what I do to remedy it

[@specialocciferdoofy]

@@3SeasRecreation yea, I'm in that same boat as well. Ran the wiring for the race harness and realized there's no plug for the fan

[@CW-up7xv]

Any solution to this? I want race harness with a fan! And a tach if able too

[@3SeasRecreation]

Hey Eric, yep I put a video on our channel with both a race harness and cooling fan kit. Ill add the link here:

[@3SeasRecreation]

Here is my updated video with a race harness and cooling fan, thanks for watching! : kzbin.info/www/bejne/nmXJZqSGqqp5eNU

[@endurokrakow]

what is good in this radiators guards if dont cover side of radiators ?

[@3SeasRecreation]

Hey Good Morning! It doesn't seem like there is much protection but we have been running these braces for a long time and have had great success. I will share a video under this comment of my rider Drew Fortner when we went to Texas for the hard enduro. This guy got an awesome clip of his bike falling out of the sky!

[@3SeasRecreation]

kzbin.info/www/bejne/m5eli5uArKqknqc

[@roncorey7289]

EE guards are way more protection

[@matthewanderson7307]

Can you post part number for braces and fan?

[@3SeasRecreation]

Hey Good Evening, yep the part numbers are right in the description of the video! We offer 10% discounts on all Beta parts and we can offer drop shipping right from Beta USA if you are interested! [phone]

[@josue24051]

Hey i have a 2024 beta 200rr will this fan fit with IMS oversize tank ?

[@3SeasRecreation]

Good Evening, yep the Beta Fan kit will work with the IMS tanks! Enjoy The Ride, Jared

[@professionalpiddler1071]

Great video! Will this fan work with the Unabiker radiator guards?

[@3SeasRecreation]

Good Evening, thanks for watching our video! I just looked them up on their website and they use some cross braces behind the radiator. I am not sure they would clear. That is probably a great question for their tech support! Thanks, Jared

[@glassapology]

Do you not use the large washers that go under the 8mm bolts when mounting to the frame?

[@3SeasRecreation]

Hey Matt, thanks for checking out our videos! When installing the Bullet Proof Rad Guards it comes with the smaller washers. The bigger ones will not fit in the side holes in the outside of the rad brace to access the bolt/ washer on the inside. Enjoy the ride, Jared

[@jesserichter7560]

What fan kit is that I ordered motoes radiator guards and next us a fan will this fan work?

[@3SeasRecreation]

Good Morning, thanks for the comment! This is the fan kit that is sold right from Beta. I am unaware of the motoes radiator guards and how they mount. It may be best to get your guards in first and mock them up to see if they will work with this fan. If you think the fan kit will work I would be glad to sell you the Beta parts so give us a call! We offer discounts and usually free shipping on orders depending on the order size. Thanks, Jared

[@snowtool00]

Does the brass plug sensor touch the coolant directly? Wondering if I need to drop the coolant to install without the stock brace. Running the 7602 brace/guard combo.

[@3SeasRecreation]

Good Afternoon! Yes this brass plug goes straight to the coolant. When you reinstall I would recommend using some pipe tape to keep it from leaking! Thanks, Jared

[@snowtool00]

@@3SeasRecreation Thank you! Sounds like I need to pick up a jug of coolant then.

[@Reaper300rr]

Great Channel, can the radiator fan be used with the ims tank installed is there enough room

[@3SeasRecreation]

Yes, absolutely. We run both on all of our race bikes. But, you HAVE to run the cooling fan on the LH side. Enjoy The Ride, Jared

[@Reaper300rr]

@@3SeasRecreation Thank You

[@edma7694]

What is the switch turn on temperature ?

[@3SeasRecreation]

The temp is usually right around 217 degrees. They make a lower temp sensor that comes on a bit sooner if desired. Enjoy The Ride, Jared

[@bi66badjohn]

Does the stock harness have plugs for the fan?

[@3SeasRecreation]

Good afternoon, YES the cooling fan can easily be installed with a stock harness. If you are interested in a cooling fan we can help with parts and even offer discounts and sometimes free shipping! Just give us a call [phone]. Enjoy the ride, Jared

[@krazypolak1820]

Thank so much

[@3SeasRecreation]

Thanks for watching! Much appreciated! Keep in mind that we offer discounts on OEM Beta Accessories/ Parts and offer drop shipping to your door! Thanks, Jared

[@spzechlessipubstomper7018]

How can i test the fan? I dont know if mine is working :(

[@3SeasRecreation]

Good Morning, I would unplug the fan from the bike and test it with a 12 volt battery and some jumper wires. Enjoy The Ride, Jared

[@kennethskarbo6156]

Great video as always, do the factory 12v power plug have a signal from the factory termostat so it will give 12v on a given temperature or do you need to have an ekstra sensor to get the fan to start ?

[@3SeasRecreation]

Good Afternoon, the newer Beta 2-stroke bikes have sensor in the LH radiator that I installed that allows the circuit to be completed. On the newer 4-stroke models the bikes uses the sensor that is already in the cylinder to turn the fan on and off. The thermostats are just an inline unit that when coolant gets warm enough it lets it circulate through the bike. There is no wiring with the oem thermostat and you even remove them when you install the aftermarket coolant hose kits. Thanks, Jared

[@kennethskarbo6156]

@@3SeasRecreation That was werry helpful, thank you for you answer.

[@Parzival795]

any chance of the fan killing the battery?

[@3SeasRecreation]

Good Evening, NO as the fan only comes on when the engine is running. This will not come on when the key gets turned off. Enjoy The Ride, Jared

[@endurokrakow]

when hitting the side, the radiator will be bend. the side of the radiator does not have a protect .

[@3SeasRecreation]

Hey Good Morning! It doesn't seem like there is much protection but we have been running these braces for a long time and have had great success. I will share a video under this comment of my rider Drew Fortner when we went to Texas for the hard enduro. This guy got an awesome clip of his bike falling out of the sky!

[@3SeasRecreation]

kzbin.info/www/bejne/m5eli5uArKqknqc