On the 2nd Day AFTER Chrsitmas

[@josos8711]

The part isn't painted . . . until the rattle can is empty.

[@UnCivilEngineerIRL]

A true student of 'the master' 😂

[@josos8711]

​@UnCivilEngineerIRL Milo rip, is the master of masters.

[@lc4biker]

You probably know this, but breaking the edges of your part will give a better result for corrosion resistance, as the surface tension makes the paint avoid the sharp edges. I worked in a shipyard back in the mid -90s and the "finish before paint" spec dictated a radius of 2 mm or more. But then again, no parts of the hull had a plate thickness of less than 8 mm, so a 2 mm radius wasn't limited by plate thickness. I'm not a painter obviously, I just remember those specs.

[@stevo184]

That tough black is a really good way to build the thickness of a worn part. Like that bracket started out at about 1.5mm thick. After it was painted it's now about 10mm thick. I'm definitely going to use it from now on....

[@UnCivilEngineerIRL]

You should sneakily change from the XJ to the ER5 and see if the faitful even notice 😂

[@highviscosity749]

Unciv you are the root of all evil 😂

[@bananabrooks3836]

Fateful 😁

[@UnCivilEngineerIRL]

@@highviscosity749 pft, evil is sexy! But you knew that already *smug face* 😂

[@wibblywobblyidiotvision]

If you're in a hurry, and your part has paint on it as well as rust, you can use a DC welder at 20A or so. The liquid gets a bit toasty, but it literally blows the paint and rust off. That simoniz stuff is fucking awful. Goes on like you're spraying diarrhea through a straw, and is about as tough as the Del's Angels.

[@j_ondrusek]

How do you like the Dewalt tools compared to Makita?

[@deansamuelson4441]

Oh...thing are happening!

[@sidwainhouse]

That tough black truly is some horrible shite.

[@michaeldemetriou1399]

That paint looks like it's mixed with sand no wonder Dell likes it.

[@jediknight1294]

Isolating your rods, for 3.6 Roentkin? What sprayer is that for the ipa? I have tried a few but they leak like fuck.

[@bananabrooks3836]

Roentgen? It's not an Rg500.

[@daveross7]

Was Darth in that cubicle with you .

[@gafrers]

More work in a single video than some channels in and entire year on the same bike

[@jeffsymons7084]

User error. What you want to do is apply a light "tack coat" and then let it "flash off" for 15 minutes. Then follow up with a heavy coat so that it "flows out". Place it on some plush fabric and use a small electric bathroom heater to bake it at approximately 20 degrees celsius for 2-3 days. You then have a ripple smooth final finish. Hope this helps you in the future. All the best, Gunter.

[@Wayne1977]

Matt sounds like my uncle Allan in that mask. Please don't touch me.