Disassemble crossbrace SMT205

[@md4uh]

i just did my suncast box. no need to flip it upside down - and thankfully so - since it is bolted down to an elevated carousel

[@S.JerseyJim]

Thanks 8yrs later. Hope you’re still with us. 🙂

[@TheBiniman00]

Thank you, that's exactly what I needed to know. I'm turning this thing in to a vac hose reel.

[@keithgenter2761]

Thanks for sharing. Although ours is a different model, the instructions helped us.

[@a4e69636b]

Thank you very much for the directions. I've used screw drivers to try to pry this thing apart and failed. Your directions made things so much easier.

[@jakeoudereimerink671]

Thank you the instructions on dis assembly were awesome thanks

[@TheDemiDestroyer]

Thank you. I'm reading the owner's manual for a SSB200B and this guide helped me understand what the crossbrace is. The guide simply says to "lift firmly on reel crossbrace to disengage snap" and I wasn't looking to break anything.

[@jort75]

WAY BETTER Than the directions that came with it. Your previous video of taking it apart was on SPOT. Thank you!!!!

[@alanfletcher3912]

Thanks buddy this really helps! Just couldn't figure it out

[@anthonynelson9071]

YOU need too tell people to Hit All Four Sq. Spots or it doesn't come apart!!!!

[@JC-ye7pj]

Should anyone need to replace O Rings on this model, I found them at the O Ring Store Part Number E70113 Minimum order of 17, but they are .10 ech, fixed my leak and only had to disconnect the feeder hose connector at the box- See 2:35 mark in the video to access the O rings.

[@taylorboyd4199]

This guy knows exactly what he is talking about (but I only had 1 putty knife so I used a gravity knife as a substitute.) This worked exactly as described. I hope I can find the reassembly video.

[@jillmarra8086]

Nice instructions. We have a brand new Suncast hose reel, needed to replace the outtube assembly due to it cross threading. It is just a little different in design, we were able to get it apart using just the screwdriver to release the 4 connection points. From there installation and reassembly went smoothly. Thanks! Hopefully it will not cross thread again!!

[@JC-ye7pj]

Great video- I hate to thro away my Suncast that needs knew O rings. Anybody know where to get new o rings for this model? Or what size needed where the feeder hose connects?

[@richardfabrizio8998]

Check out website. They have them 99 cents

[@tedreynolds5285]

What about the handle? Mine doesn’t pop right off like that. I can’t remove it.

[@powerboatserviceinc867]

Thank you this was very helpful!

[@tomwall2361]

What size are those 2 o rings?

[@alenapetty7872]

Can it be reassembled with the hose & crank handle on opposite sides? Thanks in advance for a response!

[@vijaygug9767]

Thanks! Worked flawlessly

[@jamesreyes6688]

This video is useful for the Hampton Bay decorative hideaway hose reel Model PHW150HB.

[@alohaterryhopkins1]

Excellent

[@RichardGerard]

I'll buy a new one for $25 bucks..