DIY 240SX FUSE BOX TUCK is COMPLETE! (Massive Surprise at End)

[@YourUnwantedFriend]

I just want to thank you. This is something ive wanted to do for the 5 years ive owned my 240sx and I've never really found a solid video and I was always told it was extremely hard, but you've simplified it enough for me to understand and feel confident in myself to take this on myself.

[@Zentryte]

I've also been doing it just started few days ago but haven't been able to work on it much. Turning out good though.

[@driftboi3989]

finally the video is here 🙌🔥

[@ress87]

If anyone else is thinking of doing the same, keep in mind that soldering is NOT recommended in automotive as it weakens the wires and can break during stress and vibration. Crimping is the way to go. Except for that detail, great work.

[@geraldrogers9481]

Waiting for a while to see the vid...my anxiety is kicking in seeing all that wiring 😁😁

[@joshXnovak1]

YOU’RE BACK! Glad things are continue to move along!

[@KalvinMalli]

Can we hit 1000 likes!! Be sure to watch till the end 😎 A lot more content to come!

[@rodney.t9082]

Can't wait, love your videos of the 240SX👍🏼

[@MentleGan]

You are a wiring guru, I'd be crying in the corner by the time you finished that thing😂

[@mket_design]

So cool to see your cat chilling on your lap.

[@shredct3118]

It's been a minute boi. I was jones'n . Hope you don't lose that nail.

[@AverageJoeBuilds]

I just got done doing this in my rhd car and it was not fun lol dope build man it's sick to see people not running to new chassis and still running S chassis

[@jonsmith7426]

Only person I've seen online soldering correctly. Good on you. Aww my cat never sat on my lap, let alone while working

[@setharroyo6611]

Finally man we all been waiting for you to drop another video 🤙🏻🏎

[@nVision_]

Glad to see the little solder tip helping. Keep up the grind bro

[@cdhm1999]

I was waiting for this video😭❤️

[@CompressorSurge]

Really informative video. I go back and forth about doing this to my s13. Looks amazing though 🔥🔥🔥🔥🍻

[@stefanoneill1320]

Been watching this over and over I'm in the middle of a project bulid and am looking to redo the harness but don't know anyone close that can help with it trying get as much information on it before tackling the job lol

[@Prayforthesegainss]

So clean! Nice tip on the soldering!

[@MrJman967]

That VROD!!!!

[@1carlsworth]

Amazing Wiring is one thing I don't mess with You could charge big money for that- the transformation in the engine bay is well worth the effort and money - they look awesome without all the mess in there - great job

[@solanod12]

Yeah Boi been missing your videos!

[@basharalgahim63]

We’ve all been waiting 😭😭💯

[@CP240sx]

You are amazing with your skill of dealing with wires. I will never attempt ti do wire harness work.

[@h2ogaming464]

uff 60fps broooo look so good!

[@Charg3boy]

Keep killing it

[@jlehm]

Just a heads up to anyone out there wanting to make their own harness...you do NOT concentric twist a wire bundle by putting the end of the bundle in a drill. That is NOT the correct way to twist the wires. If you want a good detailed explanation, check out hpacademy and www.rbracing-rsr/wiring_ecu.html

[@sabrewulf9441]

Well done!

[@jellevanvijven2292]

You need more RB in your life i think

[@vgswappedpressurewasher8150]

Jelle Van Vijven, for sure

[@htxlui1012]

That's Texas weather for ya lmao

[@turtletoes7499]

dam i wish i could have you build my car fully bro 😎🔥

[@fitelite2405]

I wanna do this for my s14 but I'm legit terrified about wiring. I think I'll go to a junk yard and get a full harness out of a Nissan (insert name here) and just try simplifing like this, with the FSM. For practice purposes

[@CompressorSurge]

FitElite240 not a bad idea. 👍

[@nathansivola7138]

Alright so I ordered a sticker March 10th it's still not here is everything good man??

[@Gator_Built]

When will the vg swapped pressure washer shirts be sent out?

[@mikefoster4105]

I've had a problem once twisting together wires like that with a drill, it caused interference for some reason... Never figured it out but maybe if u do that with only power wires it'll be fine but not sensors......

[@rboyett]

Yea it hails frequently here in texas

[@WhiteysWiring]

Have you seen the tessa tape that isn't furry? Much better for exterior harnesses. Also, we find putting wires in a drill to twist them in that way causes excess stretch and strain on the wiring and insulation. Proper concentric twisting is done by hand.

[@CompressorSurge]

Whitey's Wiring they make a less " furry" version?

[@WhiteysWiring]

@@CompressorSurge haha yes 'furry' to have a lack of 'fur' or 'fluff'. Not that OTHER kind of 'furry'

[@chris51050]

whats up with that white 3000gt while you were looking for woody?

[@derekscott1770]

Notification Gang 💯💯

[@christinejohnson3291]

Jus by the title I know this is hell 😂

[@n0t0nyx]

Nice cat

[@unknown-co3hu]

day 13: kalvin still hasn’t noticed me 🙁 hopefully he can start uploading more or make videos longer, i’ll watch every add if i have to

[@cxcevents]

do you use any flux to draw in the solder?

[@7falmes]

Kalvin is that your motorcycle?

[@jonsmith7426]

There's a 5 speed, 4x4 ar5 colorado near me for 2 grand. 3.3 front and rear diff? So tempted for an awd jz truck

[@waymenlawrence2064]

Go for it!! 👍

[@PokeSerafim]

Yo bro ever get those stickers I sent you?

[@Uglier.]

Kinda weird how I just watched your last video a couple hours ago.

[@iamjoedy4883]

Bro we need 30min vids!

[@scottweb3973]

Hey I left a message here in comments on last video I have the fuse box cover u need

[@kemosabe8313]

You better get cracking on these videos.. not gonna lie I miss seeing you vlog

[@ayesjunandy5435]

Ouch man

[@rustywrench500]

Released 10 minutes ago.

[@DeiLoSoul]

Are you willing to sell the Fuse Box Tuck Plate ?

[@KalvinMalli]

I can make you one no problem. Shoot me a dm or email.

[@MultiBlock43]

Song at 6:35?

[@BUZDRIFT]

Oh, god not Solder!

[@Tragaanthony]

just boy and his cat

[@waymenlawrence2064]

Where's your flux kalvin🙄

[@lahnie95]

Song at 6:48????

[@brando7655]

“DaiLy upLoaDS”

[@vgswappedpressurewasher8150]

Brando765 ouch

[@vgswappedpressurewasher8150]

Ok, why does KZbin’s new update on mobile look like PornHub’s?

[@MultiBlock43]

music at 6:35????????????????????????????????????????????????

[@si6m577]

PLEASE stick to a schedule, not saying daily but definitely not once a week

[@adamfcs1131]

Vids are slacking again, you getting ready to disappear again? Haha

[@vgswappedpressurewasher8150]

Adam May I’m really starting to miss those nightly live streams

[@vgswappedpressurewasher8150]

Song at 15:03????