DIY: 5 Lug Conversion on your Car or Truck

[@PropKnucklesFPV]

You're the only KZbinr I watch ads for. Love your videos, and that's the best way I can help :p

[@chrisfix]

Thanks a lot Beau! That really means a lot and helps greatly! What also helps is how you guys watch the whole video completely though! I know you do this because I can see the stats and I also thank you for that so so much!!!

[@raptorsghost3085]

ChrisFix i have a request and i hope you make this happen but is it possible if you can moke a video about how to uninstall and install a new sound system or a radio into a vehicle.

[@theogsaint03]

ChrisFix, why don't you say hi to me on face book

[@ssofyanhidayat4993]

ChrisFix please make video everyday

[@fordguyaj5581]

ChrisFix long time subscriber live your videos,my ford ranger has a problem in the steering I uploaded a video of what it's doing , if u have a spare 5 minutes could you check it out and maybe give me a diagnosis. Thanks

[@chrismiester1214]

Who needs thread locker when you have corrosion to hold your bolts tight

[@lassehansen1493]

Chrismiester i have never laughed so hard to a comment before hahahaha:D

[@101Volts]

Then you get to play games of *MANLY BOLT REMOVAL.*

[@jonnymac8925]

Live by the Atlantic Ocean (200 feet away) Can confirm corrosion will hold bolts tight lol

[@elderofdarkness]

haha

[@jaysonlumambas9812]

yawa

[@erwinbuenavidez894]

I was always afraid to do something on my car before, but since i discovered chrisfix channel, now I DO EVERYTHING on my own car. It saves me a lot of money and above that, i'm really proud after the work i did. So THANKS A LOT CHRIS!! KEEP UP THE GOOD WORK!!

[@chrisfix]

That is awesome! I am glad the videos are helpful and that you are also having fun and feeling amazing fixing your own car! That is what it is all about!

[@graemeboyack2678]

plz do more vids

[@graemeboyack2678]

how do you fix the gear shifter boot cover thing

[@DaxterSnickers]

Yes, except you live in germany where you cant do anything without TÜV. ;_;

[@Josh_05]

E B I know right but I'm too young and my parents won't let me even if I knew

[@PMCJohn]

Can someone please make a compilation of Chris saying “medium strength thread locker” from all of his videos.

[@chrisfix]

Haha I’ll share it if it gets remixed.

[@luzhnoffgarage]

I will do that! :)

[@indrasharma6613]

Out with the old and in with the new

[@gizx_dB]

“Soapy wooder” I lovee When he says that!!

[@Werewolfmage]

just run it through the rust belt for a few weeks there you go! medium locking strength lol

[@slipknotfan2217]

chrisfix making sure we dont hurt ourselves during the repair is such a nice detail

[@chrisfix]

Absolutely! Safety always comes before anything else!

[@badaboom8520]

@@chrisfix as a highschooler in the direction of carmechatronic I couldn't agree more, it is especially emportant not to hurt ur self when a tool brakes, if you hit your hand on the car and start to bleed, wash it off and put a band aid on it, be like our tutorial maker and friendly neighbourhood Cris that can Fix

[@cripplingdepression8889]

Man, watching your videos really shows how easy a lot of "scary mecanic work" really is I can't wait to work on my car now

[@chrisfix]

Awesome!!!

[@ethand.7801]

Until something fucks up, bolt breaks off, cant get to a bolt your trying to loosen, replacing something to find out that wasnt the problem, of course losing that 10mm socket you need, breaking the tool you needed, not having the tool you need and finding out it's really expensive, hitting your head on the frame of the car by accident 😂😂😂, etc.

[@King_drew]

@@ethand.7801 sounds like u spent a fortune jus winging it. Good job

[@ethand.7801]

@@King_drew cant say that I have. Just annoying set backs

[@thiccboi9714]

No Hub comes off that easy

[@phreek]

Chris is the type of a guy that could fix your depression with just some common handtools

[@abirdconcernedforhumankind2345]

and medium strength thread locker

[@nicholasphillips5406]

Damn that hit me. Real talk

[@michaelwillingham7624]

Chrisfix wouldnt be chrisfix without his threadlocker

[@chrisfix]

+ScorcherFTW lol

[@skyrocks12]

or his breaker bar

[@torinhansen6719]

Red Reaper torque wrench

[@Catsncorn]

Microfibre towel?

[@dannynguyen906]

Red Reaper no soapy wooder

[@themky]

When we will see “common hand tools” full engine swap?

[@chasehanson45]

I can't believe you fit all the details into a 13 minute video

[@Tempest596]

I have always wondered if ChrisFix buys his medium-strength thread locker in bulk.

[@CardizoneSemblance]

Not to mention brake clean, paper towels and the ChrisFix patented "Soapy Wooder"

[@BeaudoinMotorsports]

Why? He just uses "A little Bit" .....

[@chrisfix]

haha surprisingly I buy those small containers. I really should get bulk thread locker!

[@justinbalacuit6507]

MrThecarfreak777 what's the paper towels for? ( ͡° ͜ʖ ͡°)

[@justinbalacuit6507]

MrThecarfreak777 what's the paper towels for? ( ͡° ͜ʖ ͡°)

[@ZPdrumer]

i love how you so easily use mistakes as teachable moments "Pull it out with the pliers, and if ti breaks don't worry, just pull it out from the other side" You do this in a lot of your videos and I really love it. Things rarely go according to plan and it's nice to have a few extra tips

[@briankoz6622]

Me: Chris Im having some relationship problems Chrisfix: here’s some medium strength thread locker

[@robertcaslen4855]

This is one of the best diy videos I have ever seen, I was even looking to do this but kept watching until I realized it was over lol. Very well made, clear, smooth and quick. It really is good!

[@rossmundie5942]

How to super clean the inside of a car?

[@chrisfix]

Im looking for a dirty interior and when I find one, I will make a video!

[@2450logan]

ChrisFix want my bosses car? You'll only have to ship it from Australia

[@nir0000000]

+ChrisFix Well, u didn't see my car 😂😂😂 My engine bay is also so dirty 😂😂

[@rossmundie5942]

Thanks Chris, glad to hear it's on the way at some point. :)

[@nuttm3gg]

Chris my car is super nasty. I would be willing to drive to you to use my car.

[@adammmmmWWW]

I'm a simple man I see Chris fix I like

[@terrapin52]

dude same

[@Rettilos]

Means Chris fix = boob?

[@adammmmmWWW]

Ghassen Fathalli Chris fix > Boobs

[@DaDavidVids]

This made me laugh really hard. Retweet.

[@isatntt]

*RETWEET*

[@SizarDuski]

When I subscribed you, you had 500k subscribers. And now you have 2.3M subscribers!. And I hope you will reach over 10M as soon as possible Stay amazing Chris

[@chrisfix]

Thanks a lot man!

[@olina5563]

Sector Not enough car guys for 10m subs sadly

[@BenM]

once north korea gets internet all the subs will roll in

[@artifexmusic]

4 months alter he has 2.7 mil

[@Coastalsquire]

Its Not about subs its about how Chris is so much help to drivers , racers and truck drivers

[@PopllFixit]

Quick tip: When replacing brake rotors, it's usually a good idea to also replace the brake PADS. If the old pads still have plenty of material, at the very least, resurface the pads with some heavy grit sand paper...

[@you-nh8xo]

Good tip

[@wineshghazi5314]

Can you sometimes in the future do a drum to disc brake conversion? Preferably to a E30 :) since i have one. if not no problem Thanks

[@dalcro9897]

Winesh Ghazi check out might car mod they did a drum to disc on a Mitsubishi evo

[@ka9d00d3]

Winesh Ghazi Nice. The e30 was always a good car.

[@kevink6265]

In the process of doing 4 to 5 lug and drum to disc conversion on my 02 accord. I ended up needing the whole steering knuckle front and back.

[@yomomma6492]

Winesh Ghazi he’s going to, on a video he made on the mustang he showed a “drum to disk brake conversion” on the side bar. He also said all of those videos are coming in the future!

[@Lordmoee]

What e30 model do you have?

[@kiwitztone793]

Hey! I am 13 years old from norway i have been watching you for 2 years, and i have watched all your videos🖒👍

[@chrisfix]

Thanks for the support!

[@kingbing733]

ChrisFix do roll cage video

[@justinhughes889]

Uh oh we have another car guy in the making lol

[@rowleks7102]

aahaha im also 13 (well...14) and im also from norway

[@marcogonzalez2303]

I'm 12

[@galaxy5am987]

Best channel ever . KEEP GOING CHRIS

[@chrisfix]

Thanks a lot!!!

[@walterbryan1798]

I've been subscribed to ChrisFix for a few years now. I've learned a ton and left a few comments. After watching one of your videos, like the DIY no-weld rust repair I watched yesterday, I feel like I am an expert on the subject (not arrogant, but knowledgable) and can do just about any car repair. His videos inspire me to do vehicle repairs myself. Thanks, Chris. :)

[@chrisfix]

I'm glad you learned a lot and are inspired the videos! Thanks!

[@veetikurt5018]

I dunno i don't even have a car or driving license bc im 14 but your videos are just so entertaining since im very intrested what comes to cars and other vehicles that has 4 wheels and bc of your educating and entertaining videos i might be able to get that summer job from the local garage and i dunno about how these things work in america or other countries but in Finland we have this TET-week (työ Elämään Tutustumis. Im too lazy to translate atm but you can translate if with some translator or read my desciption btw) wich is that one school week you go to somewhere you wan't to work for one week and ask if you could go and work for them (without wage wich sucks but we have own day for that work too and they might give you a little tip if done good work) and in here where i live is only 2 car shops one is that garage and other is body shop so thanks to these videos and that my grandfather and father knows lots about cars and they will teach me too im starting to get a hang for this but i've heard that in USA you can get your drivers license when 16 years old and if that's true im so fucking jealous bc in Finland that age is 18

[@chrisfix]

Awesome man! I am glad you enjoy the videos!!!!

[@veetikurt5018]

ChrisFix ofc i do😁

[@joesobang5675]

The breaker bar is so satisfying

[@sushh1]

not as satisfying as the torque wrench

[@moonstar4722]

I am a Bangladeshi, I like your work very much .... I am learning the work of car engine in Bangladesh, I really want to make a living by working with good and skilled teachers like you.

[@trippykidd5267]

I watched you way before I had a car now that I have one I'm glad I learned how to maintain it and not waist a lot of money specially on the blinker fluid 🙄

[@meamjustme]

"A real easy trick is to go into the interior" Me: What interior???

[@mjc0961]

That's what I said out loud too when I saw that 😂

[@dumb2smartd376]

i know this is a joke but incase you were serious, interior means the inside of said thing(sitting in the seats, looking inside anything, etc)

[@ahmadayman2434]

@@dumb2smartd376 nah it’s because there is nothing inside

[@13THPR0PH37]

I said the same thing...😂

[@preferreddrift6270]

I drive a 240sx, and I was about to do this, this video is perfect he even gave me the torque specs. I need to do no research because he did it for me. Great video like always

[@newfoundrooski]

Preferred Drift what year is your 240sx?

[@preferreddrift6270]

Nick Crane it's a 1990, 89k miles, all original

[@jameshawkins809]

Preferred Drift you still need to do some research unless you plan to buy this exact kit and even then you should still read.

[@preferreddrift6270]

james hawkins what? Already did t yesterday

[@mumme2004]

Preferred Drift lmfao

[@greenmachine6672]

Wow the details he goes in to and patience to do what he does is crazy. LOVE every video, thank you for all the help to save money ChrisFix

[@dnfkinggames7504]

I'm 12 I don't have a car but I love to watch your videos because they inspire me to be a engineer/mechanic Keep up the good work

[@xmagnus9671]

same😂👍

[@jameshawkins809]

MudJugBill that is actually wrong. They say if you get paid to do what you love than you don't see it as work at all.

[@jameshawkins809]

MudJugBill you're going on personal opinion for you but if you actually loved your job it's not like working. Maybe your management or pay sucks. It also makes your skill set even better since you do it daily so personal projects would have a better fit and finish. I'm an electrician love what I do and just bought my first home and have many projects planned out.

[@jameshawkins809]

MudJugBill I already am. Was doing audio systems for friends cars in high school. Did online how-to projects like making tasers out of Altoid cans. Not I'm an electrician and have been one since 2008. Currently building a nightlight for my daughter's room. It is what you make of it and you shouldn't be going around trying to kill the dreams of a 12 year old just because it didn't work out for you.

[@jameshawkins809]

MudJugBill like I said, that is YOUR truth, not everyone else's. There is no need to down play what I said, it was a hobby of mine at a young age dealing with electrical things and now I make a living off of it.

[@bagged.brayden]

Show us how to super clean the interior.

[@RaceboyYT]

Brayden Moncrief step 1: remove everything from interior Step 2: go to parts department in nearest Nissan dealership Step 3: order all new parts for interior Step 4: wait for parts to come from Japan Step 5: install all new interior parts Step 6: fix any possible injury on self Step 7: enjoy all new parts from Japan

[@chrisfix]

Once I get a car with a dirty interior I will.

[@denzelanding6852]

ChrisFix how tell if you have bad fuel pressure regulator

[@ericespenshade2737]

I can make it dirty for you for FREE!

[@ConchitaProductions]

*A licence plate*

[@Fathom324]

I love how you do EVERYTHING step by step. I find alot of car youtubers that only skip to „fun” stuff. But i enjoy all of it, not only the new fresh stuff. And i will use this tutorial on my AdamLZ inspired 200SX s13 ❤️ ya bro

[@peterdelaney6416]

Its amazing how chris has 6 mill subs and is still in his comment section showing appreciation and making conversation (rApPEr lol) What a humble guy

[@tigresfc9441]

Chris just marry the breaker bar already😂😂

[@chrisfix]

+Itsbeachbum ! I do!

[@tigresfc9441]

ChrisFix you replied 😄😄keep up the great work when I'm old enough imma buy an 04 subie and use your videos as help and inspiration

[@parrm9580]

Dont tell anyone but i caught him cheating with Blue medium strength thread locker

[@tigresfc9441]

LowFD3S dude for real?!?!

[@MrStevile]

Don't forget to keep the thread locker around in case the marriage doesn't work out.

[@DonsPlays]

90% of your videos I watch have nothing to do with my life at all but I watch them anyway xD nice videos man!

[@chrisfix]

Thanks a lot! Hopefully you learn something new while watching as well!

[@DonsPlays]

I actually have two videos I would like you to make!! How to fix a sagging headliner of a car (the material one) and how to fix a small crack (big chip) in a bumper without spraying the whole bumper

[@AstroTerran7734]

Dons Plays check out bleepin jeeps channel. There are a few good videos. Also sun visors.

[@cristeto96]

I thought i was the only one!!!

[@JohnnyKoch]

Chris you always put out quality content! Wish you did more videos bro!

[@chrisfix]

Thanks man! They are quality because from the minute the last video goes live, I start working on the next one. I spend at least 12hrs a day working on a video every day until it goes live!

[@JohnnyKoch]

ChrisFix that's awesome man. You never disappoint!

[@xxtoxxicgamerzxx6945]

ChrisFix you my friend have saved me so much money and made me learn so much about cars thank you so so so much ❤️✌️

[@weaver4907]

Damn ....I don't even wanna imagine that, it ain't easy man. Keep it up. Gewd!

[@ikillerxle3072]

Johnny Koch your right

[@cmm7566]

After 2 weeks of chris fix video's, my mechanic was sent to change his job. Well done chris!

[@JFBence]

Could you do a video about "Super cleaning your car interior"?

[@101Volts]

It would be good to see. Until that day check out the Ammo NYC channel, they're good too.

[@gokartsminibikesandmore9925]

I asked the same thing

[@TheBlackstealth]

The reason it is recommended axle nuts are discarded after use is that many are torqued to yield and so strength is compromised after being torqued. Sometimes this means the nut is permanently stretched so its not even possible to thread it back onto the axle. However, not all are torqued to yield, follow the instructions in your service manual - if it is recommended to replace it, they're cheap, might as well.

[@Antiganos]

TheBlackStealth Nice advice, can NEVER be too safe my friends.

[@asem1738]

I'm not even old enough to drive a car but I enjoy Chris' videos.

[@chrisfix]

Awesome! When you are old enough to drive you will know more than most people on the road! Heck you probably know more now haha

[@zreenzafar4205]

Mechanic's hate Chris because he does everything by himself. Mechanics be like bro why😭

[@chrisfix]

Haha

[@xfirty2x]

His friends and family love him though 😏

[@woosher737]

@@chrisfix im gonna rank you as a home car mechanic, bc you have sick videos

[@chasepackard3311]

mechanics probably watch chris fix on the job

[@slightly7201]

Mechanics hate Chris fix because he makes it look easy

[@Quartz-GT]

Don't even have a 4 lug wheel, but still stayed for the whole video! So much to learn from you Chris, thank you for all your work these years :)

[@chrisfix]

I’m glad you’re learning a lot!

[@konigschumacher117]

Chris, thanks to you I could fix the brakes of my father's car. Thanks! I've learned a lot from your videos! (sorry for my bad english 😅)

[@ricomotions5416]

KÖNIG SCHUMACHER are you german?

[@konigschumacher117]

Rico Motions no, why?

[@lt1cruz666]

Finally met Chrisfix at my local car meet😄😄👌👌

[@chrisfix]

Sweet! Nice meeting you dude!

[@romeoguerra1751]

Does he show his face at the meets or does he wear a helmet?

[@123456bmx]

heriberto cruz was he wearing a chrisfix shirt?lol

[@chrisz.9974]

Jenn Dy usually?

[@elshowdelpape4445]

ChrisFix when he is comeing to Houston?

[@ericmurphy447]

This is actually a really helpful video. I hate the look of 4 lug nut wheels, and as a future car resales man I think other people will like it too

[@Josh_05]

I want Chris to upload more because I love this channel

[@chrisfix]

If only this type of video and this quality didnt take time. I would love to upload more often and I am trying! The more I can help people, the better!

[@Josh_05]

ChrisFix yeah i suppose it's hard I can't believe that Chris just replied to me I'm 10 👍👍👍👍👍👍👌👌😁😂

[@Josh_05]

I

[@disco1ize]

In the video you never mention what 5 lug Disc covention was needed and where can we purchase it?

[@wakcedout]

And here I always thought replacing wheel bearings required special tools. I’m no gear head or car but but I enjoy repairing my vehicle on my own. Don’t have the spare cash to buy tools like you did but doing the repairs myself still keeps me from going into major debt

[@MaplePanda04]

Replacing the actual cartridge bearing from the hub would require a press and extractor.

[@pablohernandez8427]

Is it just me or does chrisfix make everything look easy

[@King_DarkSide]

I have a ford focus, and I wanted to do a 4 to 5 lug conversion, and this video showed me how to do it! Thank you!

[@marcusbanks153]

This is crazy that you made this video, my grandfather has been asking me to do this for him so he can put his 22s on his new Lincoln 😂

[@jaxonwalz7735]

Sharkbate I did the same thing but with 19s on my biological fathers 1999 Ferrari

[@pizzasub3194]

Jaxon Walz Just say "fathers" not "biological fathers".

[@jaxonwalz7735]

Pizza Sub lol sorry mate

[@MrAlsoto]

@@pizzasub3194 He probably lives with his Non-Bilogical Father...

[@Raphayel]

That’s a nice 240.

[@cafuushino]

@@FishbedFive i think it's a 240 nsx

[@kappakatana4730]

@@cafuushino its a joke dude

[@averagemonke4428]

@@cafuushino r/wooosh

[@someoneidk6303]

@@cafuushino it was a joke you can of spoiled baked beans

[@bassbooster5587]

Yeah that is a cool volvo

[@Anthony_Torres209]

I'm sensing a drum to disc conversion in the near future...🤔

[@chrisfix]

Haha you know it!

[@ethanarmbruster7341]

Please do my drums in my truck are due for an upgrade!

[@anthonybest9423]

Yay I've been wanting to convert my 75 Mustang to disk brakes

[@HeavyChevy1975]

ChrisFix I have a 75 caprice if you'd like to use mine as a model Chris 😎

[@zarik1203]

@chrisfix I can drive to NJ for a video shooting haha

[@luiscarlosgomez5178]

Se que el vídeo es viejo, pero es una lastima que no tenga subtitulos y aclarar que envidia cuando muestras las cajas de herramientas , sinceramente es lo que sueño tener, gracias por los vídeos , gracias por las enseñanzas !!!!

[@adomasstudio7705]

I like ChrisFix, because he's the only youtuber that replies to comments with 2,3 millions subscribers. :)

[@chrisfix]

I do my best to interact with my awesome subs!

[@jdmbro7985]

ChrisFix my 2 favorite youtubers I am getting a car it will probably be a 2011 civic I will be chrisfixing my car :D

[@jdmbro7985]

ChrisFix I have been a car guy since I was like 5 I am 17 now

[@dylandajhharwood5566]

Where you from JDM Bro? The 2011 Civic is a great first car.

[@clubis31]

honestly.. u must be one of the best youtubers around.. u make quick and understandable videos for anyone to understand.. and u are well prepared for your videos and can also deliver nice quality on your videos... for real, probably one of the best youtubers around.. good work :)

[@originalstickers]

Dude, you’re so positive and helpful in these videos, thanks for being awesome.

[@southernbman]

That moment when my jaw hit the floor cause that ratchet extended. Buying now.

[@realrichmen2311]

southernbman they're the best trust a

[@Joey-rr7cl]

I just got one too!

[@chrisfix]

haha, I link it in the description! For the price, you cannot beat it. I just started using it! Way better than switching to a breaker bar every time you need a little more leverage!

[@karl28560]

He'll I found a nice extending ratchet at harbour freight. Helps alot getting the extra pull/push. Three years later no problem. MAKES A NICE EXPANDABLE BATON DEFENSE WEAPON TOO!

[@countrygamingginger2082]

Yeah, most of the stuff in the video is sold at harbor freight.

[@chapogooseman6501]

I love how you do everything to spec and torque everything down 🤙🏽 you’re awesome man!

[@DepthSeek]

Chris can u do a drum brake to disk brake conversion??

[@theoffice3802]

@Abyadhz Eldien were's the joke???

[@jonjohnson102]

Ricardo Romo in this conment

[@davidhanley7933]

I been a subscriber to saabkyle04 for 8 years.

[@chrisfix]

That is awesome! I dont know if I even had a KZbin channel 8 years ago haha.

[@Bumper210]

You should change brake calipers while they were removed ;)

[@dubious6718]

Guess that's in another video, but he most likely did it in the same take after he removed them again

[@radumladin1003]

And the brake pads

[@ricomotions5416]

Bumper210 he should have Just left it without brakes

[@chrisfix]

We only had 4 days to film 2 videos so it was just not enough time to shoot a 3rd video on the big brake kit.

[@Bumper210]

ChrisFix Understandable, Nissan with new wheels look fantastic :D

[@hs7382]

*SaabKyle - my all time favorite car reviewer.* *Thumbs up for SaabKyle.*

[@TheRexgu]

A perfect camera angle and very informative great video god bless you

[@ethanschrock4699]

Hey chrisfix... I have a quick question.... how many times have you been to the mechanic shop, I mean u know everything about cars... I come to ur channel to learn everything about a car... u really know ur stuff... I feel like u have never been to the mechanic ever!!!!

[@ahnaf5710]

I watched this though I have 5 lugs , CAUSE ITS CHRISFIX YOOO!!!,

[@thecommenter578]

But now you can do a conversion to 4 lugs

[@ethand.7801]

I got 6 😂😂

[@befer]

I thought that it was a bad attempt at rapping at first LMAO

[@katijahabdulrahman1976]

Omg

[@ethanshanahan9021]

@@ethand.7801 I got a six lug too but hey why not watch a 5 lug conversion

[@troutmask8]

So wonderfully and clearly described ..no mistaking exactly what needs to be done ..you guys do a sterling job ..many thanks and keep it up

[@dadesigner2315]

i want to see a turbo install because ur video is so much helpful.. 👍👍👍

[@chrisfix]

Im glad the video was helpful

[@dadesigner2315]

ChrisFix turbo plss chris 😊😊

[@alexandrosgrivas1299]

Damn these rims look real good on the 240

[@chrisfix]

They really do! I was skeptical at first but after the hub conversion, they look awesome!

[@fuckingrobert]

ChrisFix like!

[@williamsinger4124]

Alex Grivas something about the TE37s, they look good on alot of cars. I love em so much I got 3 sets of them for future model cars I build

[@shiikon2193]

Doug is the type of guy to... oh, wrong video

[@zionadam6425]

Chicken Bro Productions Doug the type of guy to go looking for dates one autotrader

[@useruncut]

you wouldn't happen to have a autotrader column would you?

[@chrisfix]

lol

[@zander69]

About to get my first car soon and wanted to do a lug conversion since the miata has a 4 lug pattern and theres a certain wheel i love thank chris this will help alot down my tuner path

[@bencrosbie]

Heres a challenging part 😂 finding a 5 stud conversion for your unpopular car lol 😂

[@chrisfix]

Haha yea sometimes that’s a challenge

[@TheBlade616]

Like my 1999 Polo 😂😂

[@thepotatokingdom5334]

Or just your really old car(think 73’)

[@FarMango]

Can't find one for an Isuzu Hi-Lander.

[@johnnymartinez305]

@@chrisfix Hey, Chris. How do I know which hub bearing specifically to purchase for my car? My 1996 Toyota Corolla is 4 lug and would like to make it 5 lug like this. Do I order the 5 lug hub bearing for a newer model Corolla that is 5 lug? How do I go about this?

[@WheelieHooligans]

im 16 and i dont even own a car yet but oh boy this is fun to watch :)

[@manlikeilyas]

Wheelie Hooligans same

[@1marcelfilms]

i used to be like you

[@joacocasal2484]

Same

[@andriasbararson9488]

I am 14

[@Quesadila21]

17 now?

[@jayden_mh]

Finally you need to post more ive only been a sub for like 2 weeks but I've watch no joke 3 quarters of you whole channel ..keep what up what you doing

[@kennysboat4432]

yeah

[@noahhunt8575]

I think I already told you Chris in another video, but anyone watching, push the wrench when tightening to heavy torque specs. When tightening an axle nut, push the wrench since you can use your weight to have that do most of the work.

[@PhilipYde]

Hey Chris my name is Philip and Im 13 years old. Im Working for my dad Who buys and sells used cars and mostly they are dirty so i clean them for 5 bucks each. But Yeah i love you videos/Tutorials because you put so much efford in to Them and it helps me a lot when i need to clean the cars. Keep up the Good work ~Philip~ (And im buying 1 of you're soapy water Stickers Soon :D)

[@leedog918]

Damn 5 bucks your dad is ripping you off bro

[@PhilipYde]

Nahh I Think Its Fun to do it :D

[@PhilipYde]

He bought one of those soap guns so Its going pretty fast and inside is just a vacuumer

[@ricomotions5416]

Philip Yde how long does it take you on average to clean a car?

[@PhilipYde]

10-20 min

[@Havvok88]

Every single video is gold. Thank you Chris.

[@chrisfix]

Thank you!!! That means a lot! I do my best and put a ton of work into each one so I appreciate it!

[@tayyabbutt9036]

Thanks ChrisFix this really helped for my Nissan 240sx! Now I can get nice lookin wheels! 👍👍👍👍👍👍😊

[@ricomotions5416]

Tayyab Butt yea the stock ones are ugly af

[@tayyabbutt9036]

Rico Motions I know right

[@brittoncooper7361]

I feel like I’m a mechanic now perfectly articulated tutorial clear concise and easy to follow along. 👍🏾👍🏾

[@josecervantes7187]

Hey, can u do a video of a drum brake to 5 lug conversion!?

[@dachiiiii]

thats why i put notification bells on, i know its hard to make these videos and u make very hard job! u are amazing! keep up hard work!

[@chrisfix]

Thanks a lot man! That means a lot!

[@cabbecooz3082]

Finally another awesome video!!

[@chrisfix]

Thank you!

[@williamdrake6711]

ChrisFix how do you know if the hubs are going to bolt up properly? do i just have to go to junkyard and keep looking around until i find 5 lug hubs that have the same bolt pattern or size as my originals... ( im asking on the side with the drive axles that has to be bolted in place )

[@marvinmartinsYT]

A better wheel options is the only advantage. I’ve been running four stud on my cefiro with no issues apart from short on wheel options. I’ve gtr brakes on it with new rotors drilled and slotted. Well done in this video though. Well explained and spoken. Proper procedure.

[@buyinaspaceship3194]

3:27 someone’s getting big 💪🏽

[@jaydenmcgrath1749]

0:15 "whats up everyone" that made me weak🤣🤣

[@justsomedude1488]

I know.. he wouldn't normally talk like that lol

[@williamriddersporre8514]

I dont even own A car... why do I watch your videos ? Cuz they are amazing! I'm also wondering when you are going to strip the driftstang interior? Keep it up #notificationsquad

[@pizzasub3194]

sinkopoliisi Or he's probably less then 14 like me. It's not like everyone is old enough to have a drivers license.

[@kasper5688]

sinkopoliisi mee oikeisii töihi

[@tuxedo6322]

bro how are you so good at fixing cars perfect without worrying. Also keep up the work man

[@HarryOgStolt]

you make the best toturials dude!

[@chrisfix]

+Jonas André Pettersen thanks!!!

[@DwightCastillo]

What is the cost of this modification? That info would be awesome!!

[@DwightCastillo]

Forget about it! I've just read the description :)

[@chrisfix]

Yea I always link everything in the description.

[@lemonwax]

“I like to apply a little anti seize” Half a tube later.

[@jrbbikerx3309]

Two things: 1. Remind people to make sure the e-brake is on Bc with open diff cars it can now roll with 1 rear wheel off the ground 2. You should have put a little grease on the front spindles so the hub doesn’t freeze on over time

[@ericespenshade2737]

love that you don't swear

[@chrisfix]

Thanks! There is no need!

[@centralillinoisdashcam4367]

I have also seen no need to swear.

[@mfmees]

Hey chris when are you going to install the 6 point harness and rollcage? i am very exited for that!

[@chrisfix]

Once the suspension work gets finished up!

[@mfmees]

ok thanks chris

[@thiagofeltrin9841]

I'm always impressed with the quality of your videos. Congrat's for this marvelous job!

[@thiagofeltrin9841]

Two years ago I was here and now the algorithm has brought me again. Thank you YT ❤

[@alexandergarcia6815]

Dude, why aren’t you teaching these things at a school? Seriously, you’re THAT good! I rewatch these videos whenever I can, and I feel like I’m sitting in a class that I ACTUALLY enjoy!

[@vteckid82]

Why is Butters driving a 240sx?

[@dibblesvillard5268]

ChrisFix: Go into the interior and pull the e-brake Me: What's the interior

[@tituskalka3848]

@skyline he means he knows nothing about cars

[@lululhad7948]

@@tituskalka3848 he means there is no interior left in the car...

[@robertheinkel6225]

More like where is the interior.

[@emerson5225]

@skyline you know that one of your Wheels are in this video,right?

[@saba7733]

@@tituskalka3848 he is joking you pinecone

[@johnnyj7399]

Where's the footage of Adam LZ drifting the Drift-Stang?

[@3mrx299]

+1

[@Cazinskye]

General John +2

[@nicholasbellefeuille6143]

General John +3

[@xmagnus9671]

+3

[@5813baby]

+4

[@eekamini]

Awesome tutorial. I will definitely be converting my mini cooper from 4 to 5 for more wheel possibilities. Thank you so much chris!

[@zebra5591]

What about greasing the shaft the hub goes on to help with removing the hub for future maintenance

[@M11Production]

8:44 - Can we just talk about your thumb for a moment, can you really bend it backward that much?

[@DustyDustGaming]

Yo wtf

[@axnn1]

Yeah it bent back so far. I wonder if he’s double jointed or something?

[@M11Production]

@@axnn1 Wouldnt be suprised, but daaaamn!

[@joshdoeseverything4575]

Can you not press your thumb to do that lol?

[@isaiahwyant3479]

oh my god

[@syedzain8603]

How to watch ChrisFix videosStep 1: Shut the doors and Windows of your roomStep 2: Put your headphones on and set the volume to the point where you cant hear ambient soundsStep 3: Like the videoStep 4: Watch the videoNote: If anyone tries to disturb, Kill on sight.

[@yatagarasu1495]

Syed Zain i have to watch his vids on the phone cause my headphones make his voice turn somehow off :( Like its faster on one side

[@itzmistz]

I've had these conversion kits for ages now and didn't realise it was this easy to install