DIY 5 Minutes Bed Frame

[@SEBTECHDIY]

▶️ Hey Guys! 👋 I have received several questions about where to find those angle corner clamps. You can find them here : amzn.to/3Ek14s5 ( Affiliate link )

[@KennySmith86]

Hi. What would you do if you wanted to make the bed higher off of the floor

[@julietellis4891]

Love it up

[@tylerdurden5150]

Combien ça coûterait les matériaux à peu près

[@worldwidegamer1983]

why not juse use 4x skids for free and ad some fancy on the outside and save 90% of cost

[@elmontro]

I’ve been working with wood my whole life, I can attest this is one solid piece. The info is clear and to the point. Very well done, sir.

[@Demigod69x]

That’s what she said

[@Lyve613official]

What size bed did you make this for

[@ontheroadwithjames954]

I don't work with wood, never have but along the inside rails for the straps, could you not set the straps to sit flush with the top edge of rails, connecting the straps together along the underside so you can lift all the straps at same time to clean underneath the bed, by sitting them inside the rails you wouldn't need to screw them down, or you could possibly put a hinge on the frame for the strap?

[@Ben-mx1ip]

This is incredibly sturdy compared to what is minimally required. Looks amazing

[@mitchfowkes5602]

Why the hell would anyone dislike this video? It was great and gives another cool option to build a base for a bed. Nice job man.

[@rumdab]

It's the internet lol, if there was a video where the world would end when someone clicks the dislike button I assure you someone will press it 😂

[@east5871]

Those who can, do! Those who can’t, criticize!

[@erenymn]

@@Blahbee yes I disliked it because it says 5 mins, its kinda clickbait.

[@diamondowens4501]

Cause they lazy and don’t know how to be creative so they hate

[@ruebush44]

​@@erenymn the video is 5 mins long.

[@wahnano]

Oh, what a brilliant idea! And of course, I absolutely cannot wait to gather all the necessary tools for this little endeavour. Oh, the joy of searching and gathering tools. I'm positively thrilled!

[@g.d2450]

I would have had the slats sitting 2 inches lower into the frame so the mattress doesn't slide about, but very well made bed overall

[@mridahokrieg6114]

Same! But still a great build overall!

[@heartanddagger5861]

I agree..great tip.

[@dirty_hairy9040]

I’m doing this frame with a few modifications as this and the head board with 3 boards

[@nathanbehl8559]

Just built mine sat the 2/4 ledger 2inches below the top of the frame, bed sits in prefect.

[@east5871]

I’m redoing my bed frame to something like this. Currently the mattress sits on a flat surface and I’ve never had a problem with the mattress sliding out. You must be more rambunctious in your bed! 😂

[@novyymir4439]

I need a new bed and the prices in the furniture stores are frightening plus the quality isn’t amazing. So, I’ll make my own. Thank you for your video and ideas.

[@benarneld]

Man, this bed looks amazing. I love the sturdiness of it. It looks simple, yet very beautiful. You definitely picked the right color. That's definitely the bed I wana make.

[@YPichtel]

I am no woodworker, and really enjoyed this video. Good stuff.

[@RYANMAKO]

Wow looks incredible! My wife and I are looking to do something like this. So thanks for all of the tips and tricks.

[@dsalazar1125]

idk why im watching this, i can barely build ikea furniture, i think the quarantine has got to me 😪

[@x239guyonit]

lol

[@Chemi5]

Me and u both😂😂😂😂

[@dscott2542]

If you are inspired by this recording you have the skill to build it!! This is not an especially difficult design, and is an absolutely beautiful finish. You will love this so much more than asembling flat pack furniture (which happens to be something I do as a side business)

[@videoslue]

Lmfao I bought an ikea king malm. About to put it together and was like make I can build one. After seeing this I'm back to I can barely put the ikea together

[@craigbradford5730]

I didnt think I could build a shed but I did and it is awesome. I have never made furniture and this is going to be my first project!

[@brianmcmanus57]

Thank you for the video. I was going to buy something like this but now I think I'm going to build it. I work as a mechanic so I have basic hand skills and I own almost all of the tools you have so thanks for that man, I really appreciate it 😊

[@SEBTECHDIY]

Awesome! 😁 Go for it! 👍

[@ThePtgman]

Great work; you build with "overkill." That will become a family heirloom!

[@tdhat95]

Yep you are right it took 5 minutes to watch you work, but 👏👏👏👏👏👏👏👏👏👏👏to all the hours of labor!!! Amazing job!

[@miguelramirez6352]

This bed certainly looks better and of course stronger than many expensive beds on the market, and it has a cool rustic look to it too, AWESOME WORK!

[@SEBTECHDIY]

Glad you like it! Thank you Miguel! :)

[@kevingp12]

Yes a similar looking bedframe like this would go for at least 1k, and be of trash quality

[@xMADBUTTERFLYx]

I want to do this now but I personally would lower the support a little bit just to get the mattress to sink in maybe 1 - 2 inches. What do you think?

[@SEBTECHDIY]

It was going to go this way at first, and changed my mind but it's still not to late. I tough it would be easier to changer the sheets if the mattress was flush but i don't think it changed anything. So you could lower the 2x4 and the joist hangers by 1 or 2 inches. I think it will look slightly better! 🙂

[@sostrongineedmoreofyourmon974]

xoHiba xo my bed is just like this one where the mattress is flush to the frame. Way simpler to change sheets. Only time the mattress moves is during strenuous extracurricular activities

[@dalechell1085]

totaly agree. its horrible that you can see the slats.

[@cocacolatgv]

I agree with you, I’m currently building mine and setting it 1.5 inches deep to hide the slats. That’s basically the depth of top horizontal piece. Lucky for me my mattress is light though so my wife won’t have trouble changing the sheets lol

[@stillsearchingforsanity4332]

@@dalechell1085 Could one not reduce the frame size slightly but keep everything at the same level? Then you've got the mattress mostly over the slats but partly over the frame to ensure slats will not be visible. Maybe 1" overlap of mattress on frame.

[@Подземныйкот]

Dude! You have golden hands! Respect from Russia!

[@SEBTECHDIY]

Thank you so much! 😃

[@jodymorris9428]

A great build! Simple, yet sturdy! I can't wait to get started!

[@djbenjiblue7788]

Me and my father in law are building this bedframe right now with a few modifications: Using the advice in the comments, the length of the boards are being adjusted and the slats sunken in about an inch so the mattress sits in place instead of directly on top. We’re also cutting out parts of both sides of the headboard to fit in an outlet/usb charger hub. Using a hole saw, we drilled through the headboard underneath the platform on either side so LED light strips can be routed through and assembled underneath to give it an ambient glow. Awesome video!

[@SEBTECHDIY]

Awesome, share this project with us i wanna see it! 😊

[@scottydntno]

Why does it seem like everyone else home improvement store has GREAT lumber and MINE always has shitty lumber? LMAO

[@iamlyric5600]

sailing in the same boat here

[@therubbermeep7456]

ikr the mcoys in the town next to me has over priced and badly handled lumber/ plyboard but if i drive a hour or two home depot sells better quality wood for cheaper the hell is this bs ??!

[@emmanuelcastillo8736]

@@therubbermeep7456 So True!!!

[@PhallacEye]

I could make a bow out of all the lengths at my local store.

[@haganbilligmeier251]

Yea...lol same

[@rosewildbill6368]

For a simple construction this bed is very attractive !

[@figueredoruley8050]

I did it with Woodglut.

[@SEBTECHDIY]

Yes? No? Wut?

[@figueredoruley8050]

@@SEBTECHDIY I would recommend Woodglut to any beginner or professional like you 🤙🤙

[@JetSkiBuyFixPlaySellChannel]

@@SEBTECHDIY spammers

[@jodymorris9428]

I also agree that having the slats sitting lower in the frame will keep the mattress in place better! It's still a great build!

[@heartanddagger5861]

Amazing that you took the time to show us and even give the entire plan..thank you.🙌

[@SEBTECHDIY]

Glad it was helpful! :)

[@letitiawilliams6004]

I agree! Yes, thank you. My son needs a sturdy bed. He's 6' 5" 335lb and only 18. Again, THANKS A BUNCH!

[@stanmaster1205]

Nicely done. Wish i had the tools like you especially that vacumm attachment.

[@GrundyJV12]

This makes me want to make a new bed frame!!!

[@justindarnellfpv]

This is the first video of these that I think I could pull off 🥳 looks great and sturdy!

[@1texasmystery922]

Love!! Exactly what I’ve been looking for! It came out beautiful!

[@MrAmanW]

It will definitely take me more than 5 minutes, but I will be making this bed for sure. Excellent work.

[@chrismoore1063]

Looks great. You were in kreg jig heaven. I don’t know if I have the patience to make that many pocket holes 😂

[@SEBTECHDIY]

Oh yea that's alot , took me about 2 hours to drill all these holes 😅

[@jayoung747]

I just built one almost exactly like this. 2x8’s 2x6’s and sunk the mattress 2” into the frame with 2x4 slats. Stained black and looks amazing. Could park my truck on this thing.

[@chrisd1828]

Rounding over the edges and corners of the frame with a router will make it more forgiving when you bump into it.

[@SEBTECHDIY]

It hasn't happened to me yet, but it has happened to my wife several times 😅 Ouch

[@roshnadhamnaskra974]

U made me watch this saying 5 min ....but yeahh m glad I watched it... Nice work... Ur idea got me clicking another idea ... Thanks..

[@micaela409]

Beautifully done! Your work speaks for itself!! You should sell them!! I'd buy one!!

[@denisekrejci6294]

They are sold, but the price is approximately 6,000-10000!

[@carlostorres2736]

Yes nice how much did you spend on all materials including screws...nice color to it too i like it...

[@cocacolatgv]

Carlos Torres I’d say he spent roughly $150. I’m working on making the bed frame only and have spent about $100 for wood and screws

[@josuevilorio]

Well done!, Sir. You've tangiblelized what has been floating in my brain. I appreciate you sharing with the world, and another compliment is on how precise and to the point your video is. I'd keep checking more vids. As u post them

[@andreszuniga5017]

That's a beautiful frame. The only thing I would have done different was, rounded the bed frame corners for safety reasons.

[@Yconntection]

The moment you accidentally kick the corner of the bed is the moment you fall in love with these kind of the bed design

[@MK-qs6os]

Until u smash your shin on the corner 😆

[@pepperface2]

absolutely

[@MyMathex]

I had a mental image of kicking the corner in the dead of the night and me hopping on one leg and muttering muffled nasty cusses😂😂😂😂😂😂😂😂😂

[@ancientpersianempire]

lol i totally agree with you on the other hand i have heard this type of bed has its advantages during exercise events with the ladies !

[@jamalfadesemall9275]

You’re not wrong.

[@Dategiver]

My brother and I built this. Thx man 👨 looks awesome 👏

[@SEBTECHDIY]

That's awesome! 😄

[@hunternovak4571]

Any idea how I would convert these exact plans into a queen bed, didn't realize this was for a king until I bought all the supplies

[@dye182]

Hunter Novak look up the measurement for a queen and then a king mattress and the numbers will tell between that and his specs on the king frame

[@gislove8590]

Many Thanks for the 5min. video it is very impressive for me to build by my self, im from indonesia

[@jamessomerville6734]

I'm very seriously considering building this bed frame, but the plans are for king size and I need a queen. Any advice on how to adjust the dimensions for a queen before I get started?

[@Eddiefresh]

Here's everything you need to know about bed frame dimensions www.dimensions.guide/collection/bed-frames

[@alingram88]

This looks awesome man. I think my wife and I are going to try this out!

[@MR.E963]

Simple and very nice 👍, this about as easy as it gets for a beginner or even skilled craftsman not looking to over complicate things or break the bank. Nice job.

[@SEBTECHDIY]

Thanks 👍

[@JessyRenae]

Lol with the price of wood right now, I'm guessing it'll break the bank.

[@jlane9055]

it's got to be over 200 lbs i don't think so

[@awinbisa]

Amazon bed. Looks so solid. I wonder if you would be better using bed brackets for the frame as they easily allow disassembly. As it stands your bed need to be unscrewed and re- screwed which will weaken the structure.

[@antoinegervais7962]

Une bonne vidéo dun bon québécois continue comme ça !

[@SEBTECHDIY]

Merci c'est bien apprécié 😊👍

[@marksanson1685]

Awesome bed frame. So far the best looking one here! And so simpler

[@tylersinger2401]

Why has the internet started putting DIY on woodworking shit. Just call it woodworking, that's what it is.

[@DutchessSarahJ]

Tyler Singer I 100% agree. DIY my ass. 🙄😂

[@novrandy20]

For people to search their videos 🤦🏾‍♂️

[@tylersinger2401]

@@novrandy20 I think you can still search a video if it says Woodworking

[@kitty-vk8ic]

That's one beautiful bed

[@royaltonrosauro9711]

jesus has no chills

[@craigbradford5730]

Followed plans, edited to increase height of headboard, and made for Cal King size. Love it. I am so glad I found your video. Ping me for photos.

[@SEBTECHDIY]

Wonderful! 😀 I would like to see photos for sure!

[@tankq888]

New Subscriber. Could you tell me how much the total cost of this project?

[@cocacolatgv]

Thanh Quach I recently bought the supplies to make the frame, not the headboard (I have a different design in mind) and spent roughly $80 on the wood. It all depends on the quality of it. He (and I) used framing lumber which is cheaper but you need to pick the straightest pieces to make the job easier.

[@mbaumery]

This was a super super video man so detailed if you would add a floating feature to the based this would be a flawless bed build.. But rarely people take the time to do such an amazing job for a bed where you sped 40% of your life in

[@sloaneschultz6230]

damn honestly inspired me to bulid this !!!

[@pennyjimenez1612]

I love this wood working book *TopFineWoodworking. Com* . A few of the topics talked about in the book include wood working strategies, explanation on the development cycles of trees, and various lumber characteristics that craftsmen favor. I also provided my father another copy.

[@DavidTaylor-ki2ir]

Excellent project. Clean, modern, and practical. Thanks for sharing.

[@elthanos879]

“5 minutes”...GTFOH

[@evildoin11]

Lol

[@maryolincy332]

it's the length of the video, not the build time

[@cocacolatgv]

Mary Olincy it was a joke lol

[@boo2952]

Jay be calm

[@elthanos879]

Oo Voo Let me build this entire bed to lay in and calm down in 5 minutes. Hold up...

[@GreyoftheSnow]

What does putting the screws in at an angle do, like why do that versus just putting them in straight? Awesome video, thank you!!

[@pavelsolodovnikov9501]

Bravo, beau travail, belle inspiration, je viens d'acheter les matériaux, je commence l'assemblage demain!

[@rhondaradler]

I had to laugh as soon as he pulled out the tablesaw which most people don’t have. And then the video with on and on and on and on.

[@wasteoftimegames]

Chopsaw*

[@jacobromero5663]

If you’re looking to “ build “ something diy , you should have a chop saw lol

[@usmcramirez]

Awesome job! Just what I needed, simple and good looking, I will try this one!

[@mysteryguest9555]

Good luck with moving that out of that bedroom when you move. 😂

[@SEBTECHDIY]

Not really, in fact there is no glue in this build, only pocket screws. Sure you will need to remove the lattice that i nailed on the top, but other than that its 5 big pieces, the 4 sides and the headboard. I think i would take me half an hour to dissasemble it. Remember that its regular wood screw that connect each side to each other, so if you move every years maybe the screws will become loose but it my case i dont plan to move alot. In case screws would become loose, you could add metal corner inside the frame. 👍😄

[@jeancarlosgomezbueno6673]

I was thinking the same thing, also the whole thing is probable really heavy

[@alfiemarie]

this looks sooo good!!! i love the dark color wood. looks so homey and comfy

[@beverlyledbetter4906]

This bed would take longer than five minutes to make. Come on!😒

[@gamalielgonzalez4438]

that looks beautiful man Great Job

[@hapkijo9713]

Very nice, simple and good looking. My next bed will be a DIY bed for sure.

[@SEBTECHDIY]

Thank you, it was a really fun project! 😄

[@robertasell7418]

Love this!! I think I'm going to build this! Cheaper than buying! Yes, I do have these tools

[@micanl]

Looks wonderful- Gorgeous job & thanks so much for sharing!

[@guitar81sb]

great project. Very simple and elegant.

[@RANDALLOLOGY]

7 years ago I built a kitchen table 3 ft wide 6 ft long out of 2x6 construction lumber. It turned out great and is just as sturdy today as it was the day I built it.

[@crystaldennis9101]

I love the look of this bed. I however Hve a box spring and dint want to get rid of it incase its needed in the future would it be possible to not use the supports for mattress and slide the box spring inside the frame?

[@anatrincu9434]

Gorgeous!!! It looks amazing

[@remibello1252]

I love this bed but it won't be easy getting those clamps to Nigeria. Good job,great skill

[@SEBTECHDIY]

Thanks but yeah maybe some places it will be hard to get them delivred. I know they are alot of youtubers that make their own corner clamps. JSK Koubou is one of them.

[@AdrienneStarr]

awesome! you make it look sooo easy I can't even hang pictures straight lol

[@musiqclub9725]

Super simple design super look! This is EXACTLY what I was after. Thx for the inspiration!!

[@SEBTECHDIY]

Thank you, you are welcome!

[@austinmusick84]

I am going to be making this bed for myself thank you so much for showing your progress I love the bed frame you made!!

[@Liamitegaming]

It makes me feel like I can do it too. Great video!

[@Stephen-ql8ce]

I have no experience in woodwork but I have decided to make a DIY bed frame during quarantine do you think this is a realistic goal for a first timer?

[@SEBTECHDIY]

Hi! 😄 It's really hard to say but for me it was my first big woodworking project. The hardest part was ripping all the boards on the table saw. Same for the pocket holes, it was my first time drilling over 100 pockets holes for a project. Gotta start somewhere. I starting making stuff couple years ago when i bought my house and i'm getting experience project after project.

[@blueplanet9477]

Easy, Simple, Affordable and Perfect

[@ultralordsheen6377]

Can you build me a bed frame? Wow! Great work!

[@Lyve613official]

What size bed did you make this for

[@LarryRichelli]

I am wondering that by keeping the top all level does the mattress slip around as opposed to letting the mattress sit down in the frame a bit?

[@LiphSlavik]

Beau travail mon homme. Lâche pas!

[@SEBTECHDIY]

Merci !! 🙂

[@taravaughn3852]

LOVE this bed frame! What adjustments would you recommend to make it easier to disassemble for a move?

[@johnbyrd2154]

Its very nice! I would have like to have seen the slats recessed though the bed would sit inside of the frame maybe an 1". That way you wouldnt see the slats.

[@stewkatz0]

Wow vraiment bon travail! Je pense l’essayer moi-même pour mon nouveau matelas dans une boîte. Merci!

[@SEBTECHDIY]

Merci Joe 👍 Quand meme assez simple a batir mais surtout très solide. Beaucoup me suggere de descendre les lattes pour descendre le matelas d'un a deux pouce, c'est peu être quelque chose a regarder coté préférence 😁

[@stewkatz0]

@@SEBTECHDIY Merci! Très bonne I’dee de le faire descendre d’un ou deux pouces. Ça empêcherait le matelas de bouger. 👍🏼

[@clifmassey1300]

Fantastic video and bed. I'm definitely building this!

[@Speed_-vt7iq]

Nice job man, turned out awesome!

[@brynzlo]

Nicely done, thanks for sharing!

[@woodgagra]

это сделать вообще не сложно.если есть инструменты.можно даже без шаблонов для сверления.полет фантазии безграничен. я сделал себе кровать "под старину" первым делом,как начал столярничать. кстати, сейчас на ней лежу и пишу этот комментарий)

[@olyavmusic]

If I wanted to make a den area for my dogs to sleep in under my bed, could I just add another layer of base to make the bed sit taller? Or is this not a smart idea. I have not seen this design yet but want to have it for my two pups who like having nooks to nap.

[@nickdalton886]

Any advice for setting the bed lower within the frame? I love the way this looks combined with the simplicity of the project but don’t want my mattress sliding all over the place

[@Pakakakinenas]

Could you help me find the jig you use to drill out the pocket holes? Amazing video btw will try to build something similar.

[@ritu.sharma]

Beautifully made

[@1828tony]

Fantastic job ! Sr. Very well explanation !! Thank you.

[@SEBTECHDIY]

So nice of you, thanks! 👍

[@trishscott7345]

Beautiful bed frame I would like it a little bit higher than that what would you suggest

[@SEBTECHDIY]

You could replace the 2x10 by two 2x8 or two 2x10 , by joining them with pocket screws and you could add some 2x4 inside , like i did with the back of the headboard, this would add some solidity.

[@neeravmonga2831]

Nicely done. Easy to follow and nice design too.

[@SEBTECHDIY]

Thank you very much! 🙂

[@SM_zzz]

What a great design! It looks classy and sturdy, plus I love the stain colour. I'm definitely going to use this design to make my own. I'm converting the upstairs garage to a room but I don't want to buy a bed because they're too expensive and don't seem like great quality for the price...anyway, we have a workshop here so why the hell not just make my own?! Thanks for the video and greetings from Ireland !

[@gmr1016]

Trying this for our kids frame. A little smaller but very excited to try!

[@karnage1989ck]

Simple and yet astonishing.

[@amygorman5267]

Try designing with way less lumber! You could get same look with many modifications to amount of lumber, this thing is really heavy to move as well. Try a slight angle backwards on the headboard so it is comfortable to read or sit up.

[@neilberg5547]

I'm doing just that re back tilt. Going to angle the 2x4 supports / stiffeners (set on 'edge' rather than flat against the headboard) on the back of the headboard. Would 5* slope be about right? Any other ideas?

[@fanyang5563]

Your video is what exactly I am looking for.thanks a lot.

[@skelly1golf]

Super simple and very effective. Good video 👍