DIY 96-00 Civic Rear Sway Bar Upgrade! 22mm Progress Tech

[@fasttrackcam]

One of the best DIY videos I've seen on KZbin

[@kraftingkars]

I appreciate it! Thanks for the support!

[@JA_S_ON]

Thank you for vlogging your progress and keeping it methodical.

[@kraftingkars]

Thank you for the support!

[@Sauceyjames]

Wow. You make this look so easy. The rear sway bat makes a difference, i installed a TRD one on my Gen 3 Prius and i gotten so much confidence from it. Will love to feel what it does to my civic!

[@kraftingkars]

Yeah I love the feel of it! Cool you put one on a Prius!

[@cesazz]

Great vid! good products from Progress tech.

[@kraftingkars]

Thank you! I'm very excited to test out the product!

[@Backyard_Motorsports]

Barely 7 months ago you were at 3k, 10k soon bro 💪

[@kraftingkars]

Hope to hit 5k this summer! We will have a good merch selection and giveaway at the ready!

[@juliusjones7876]

I like it nice setup man. I had a hard time deciding between the progress setup and the setup I went with. Function 7 brace and lcas and asr 24mm with spherical end links. Your gonna notice a difference. Always great content guys.

[@kraftingkars]

Thank you! Your setup sounds awesome 👍

[@juliusjones7876]

Done a lot of chassis work and suspension work, big brakes to make it as competitive as I can on the track. With air walker preface lift front end and sir fenders and bumper it's a 97 hatch. Plus tons of other stuff but you'd laugh only thing I haven't changed is the original d16y7 still in it. Take care man keep pushing

[@kraftingkars]

@@juliusjones7876 at least you know your engine is realiable and gets great gas mileage!

[@iJakku]

Really good video.

[@kraftingkars]

Thanks!

[@KeepinItReal890]

you deserve to be viral. lol your attention to detail is top notch

[@kraftingkars]

Appreciate it! KZbin algorithm gotta start helping a brother out!

[@KeepinItReal890]

dope build brother

[@kraftingkars]

Appreciate it brother 👍

[@emmapellerin4526]

Great vid man thanks

[@kraftingkars]

No problem! Glad I could help 👍

[@jondoe9708]

Hey man love the video, what front sway bar are u running, and how to u like the rear so far?

[@kraftingkars]

Loving the rear sway bar, I am not running a front sway bar. Since I have a tubular subframe I'm gonna have to make something custom

[@marcusf4940]

So truhart also sells a rear tie bar that goes in the middle. Would that fit with the progress sway bar? If yes is it necessary

[@kraftingkars]

It shouldn't be necessary since the progress sway bar comes with that built in subframe brace that the bar bolts onto.

[@beboystyle620]

Nice! But did you realize you have Christmas colors? 😂

[@kraftingkars]

Happy Honda Days

[@oneday3857]

Question can you use oem rear lower control arms with this kit?

[@kraftingkars]

Yes you can, check your car but there should be one pre drilled hole in each arm

[@ALE-rq8lk]

What are those red things attached to the frame and near the suspension

[@ALE-rq8lk]

I’ve only seen them on older civic applications looks like they are connected with the sway bar but haven’t seen them in any kits

[@kraftingkars]

They are lower control arms! These are Truhart LCA's (lower control arms)

[@judebekbekcisneros8712]

How much the sway arms for sedans cars

[@eliasplayyzz6973]

How man idk if you will see this but i have skunk2 lower control arms with 2 holes in them for a sway bar. Would there be a difference if i put the sway bar links in the inner holes rather than the outside ones?

[@kraftingkars]

Yep, it changes the stiffness slightly, the best way to tell would be road testing.

[@eliasplayyzz6973]

@@kraftingkars okay thanks man love the build

[@ghostafp9891]

I have 3 holes on my lca’s if I mount my end links to the holes closer to the subframe will it make it stiffer or looser

[@petermelancon6288]

Do you have bags? Do you know if this sway Bar will work with bags

[@kraftingkars]

I am not running bags, it should work just fine though, sway bars minimize the difference in travel between both lca's, when airing up/down both lca's should be moving the same amount at the same time so it should be ok

[@petermelancon6288]

Appreciate it, wasn't to sure

[@jstyn8376]

Bro honest thoughts for rear tru hart lca?

[@kraftingkars]

No issues! Feels and looks to be a quality product

[@gavenquichocho8927]

Are your lca’s different?

[@kraftingkars]

My LCA's are made by TruHart

[@kraftingkars]

But the install would be the same with OEM LCA's you just have one hole instead of 5 to choose to mount your end links too

[@fatsheepboy]

Rx7inches 😩

[@kraftingkars]

😮

[@Top-G35]

Lights are wired up, have you a shout out on my channel 😂

[@kraftingkars]

Let's gooooo!