DIY Arcade Game Elevator!

  Рет қаралды 12,916

OneCircuit

OneCircuit

Күн бұрын

Пікірлер: 103
@HappyAtom
@HappyAtom 8 жыл бұрын
That was a scary task to take on. Great job on such an efficient and working design right out of the gate!
@Duke_Togo_G13
@Duke_Togo_G13 8 жыл бұрын
The skate ramp is awesome! You guys make me feel good about being 41 years old.
@Johnsarcade
@Johnsarcade 8 жыл бұрын
Great job, Adam! LOVE IT. Nice idea.
@bobbyjack8033
@bobbyjack8033 8 жыл бұрын
John's Arcade Game Reviews & Tech I'd just call John to push it up the steps haha
@Beaps73
@Beaps73 8 жыл бұрын
Adam man....that was bad ass. I loved how you worked it all out. I was screaming at the screen 'attach it at the other end would stop the sway on lift' really enjoyed that, thanks for sharing
@bitrot42
@bitrot42 8 жыл бұрын
Your talents never cease to amaze me. Fantastic job on the lift, and the video is very well done, too!
@onecircuit
@onecircuit 8 жыл бұрын
Thanks bud! :)
@ukxvc
@ukxvc 8 жыл бұрын
You can get games up and down those stairs on your own now, I think you did a great job there mate! Well done. Can't wait to see how the games room progresses.
@jrmcginl
@jrmcginl 8 жыл бұрын
This is inspiring. You have a problem and you work through it to find a solution. I loved all the planning and forward thinking. I really enjoy your videos. I just wish you would post more often! :)
@Sypthv8
@Sypthv8 8 жыл бұрын
Effective approach to an otherwise simple problem. Good job!
@wildernessgames
@wildernessgames 4 жыл бұрын
I havnt welded since high school, nice work on the design man; impressive. Great game room, huge.
@DrBagPhD
@DrBagPhD 8 жыл бұрын
That carpet is beautiful, so very fitting!
@cousinace3798
@cousinace3798 8 жыл бұрын
ohhh mannn cant wait for the future board repairs. Another great video Adam!
@Jones11477
@Jones11477 8 жыл бұрын
Awesome job, one suggestion you might be able to use a reese type truck hitch as a quick disconnect system for easy removal and storage! Keep up the good work, I really enjoyed it!
@ArgonautArcade
@ArgonautArcade 8 жыл бұрын
dude, that's great! love the color scheme in the game room
@Bobbydog66
@Bobbydog66 8 жыл бұрын
That was awesome adam, I know everyone else here has thought up a million ways to help with the slipping, I'll throw my two sense in. I'm thinking instead of worrying about keeping it centered on the tracks, I say have so much width, it doesn't matter. So maybe fabricate like a simple easy slide panel that snaps onto the rails of the dolly. Maybe something with cloth to slide easily enough.
@neighbordave94
@neighbordave94 8 жыл бұрын
Watched the video last night, really cool Adam
@Arcadehollywood
@Arcadehollywood 8 жыл бұрын
Hey Adam! Great video and excellent idea!!! Love your game room!!
@Chuck-RETROGAMECAVE
@Chuck-RETROGAMECAVE 8 жыл бұрын
love it! I would cut a shallow gutter in the the planks and I would have considered a system that folds out and stays in place. All in all its a great idea. hope to see some upgrades and tweak videos as time goes on.
@RcGuy4Life
@RcGuy4Life 8 жыл бұрын
Nice job Adam. Great idea
@thejunkman7581
@thejunkman7581 7 жыл бұрын
Cool game lift enjoyed from start to finish :0)
@edn199
@edn199 8 жыл бұрын
The guy in the video, you showed for the spa wench system when it dropped the spa, must be the most mellow guy in the world. He didn't even flinch when the spa dropped a story to the ground and wiped the other guy out. .....lol
@litoyguy
@litoyguy 7 жыл бұрын
That carpet and paint scheme is awesome. All you need is some neon lights. Sick game room.
@robertthenerd8617
@robertthenerd8617 8 жыл бұрын
Holy crap that's awesome dude! Way to go!
@GadgetUK164
@GadgetUK164 8 жыл бұрын
Great job! Very impressed!
@seansretroverse9082
@seansretroverse9082 8 жыл бұрын
Great job, Adam! I also have considered installing a winch, but my issue is exactly opposite of yours. I have to go down basement stairs made of concrete. Still, you've given me some courage to try!
@bh1992
@bh1992 8 жыл бұрын
Handy Man Adam lol I really find your videos informative, nice work dude. :)
@ThatTimGuy
@ThatTimGuy 8 жыл бұрын
Joy rides? Nice job Adam! Now you can have an excuse to have people help get that place in shape :D
@lildrumchum
@lildrumchum 8 жыл бұрын
great idea adam! i think part of the wavering is the spool on the winch....i may be wrong....i love it tho man.keep it up
@BarrySlisk
@BarrySlisk 7 жыл бұрын
You sir, are a genius !
@spunkybruiser
@spunkybruiser 5 жыл бұрын
Wow, that was awesome!. Great job !!!
@POOHBEAR2170
@POOHBEAR2170 8 жыл бұрын
I enjoyed your video thanks for sharing
@cybermindarcade5172
@cybermindarcade5172 Жыл бұрын
Thanks for the boat bow idea, I want to invent one that I can use for getting the games out of peoples basements and down their outdoor stairs because even with help im doing most of the lifting and its finally taking its tole on my abs and back. only think of is to mount the winch at the bottom of the stairs some how using clamps and a hook run the line up and back down the stairs and have it drive a rubber conveyer belt that actually lifts the machine and you could use it on any set of stairs.
@cybermindarcade5172
@cybermindarcade5172 Жыл бұрын
a ladder with a dolly on tracks attached and the winch attached at one end might do the trick? only thing is would the ladder feet wedge be strong enough to hold while lifting the 500 pound machine?
@puddingpimp
@puddingpimp 8 жыл бұрын
With the paddle bits, and generally drilling wood, there are a couple of things you can do to prevent tearout. One is to clamp another piece of wood behind it (which might be a bit difficult there), the other is to just drill through nearly all the way, then go round the other side and finish the hole.
@fookutube501
@fookutube501 8 жыл бұрын
I'll tell you one thing Adam,you have got alot of love on your channel,from your Sub!!!
@puddingpimp
@puddingpimp 8 жыл бұрын
Could you route some slots in the accordion rails for the wheels of the dolley to run in?
@paulcraven3810
@paulcraven3810 7 жыл бұрын
More Vids Adam, your stuff is great!
@ChezArcade
@ChezArcade 8 жыл бұрын
Awesome project to see man!
@mcpit8493
@mcpit8493 8 жыл бұрын
Nice job mate!
@D4ftChunk
@D4ftChunk 8 жыл бұрын
Great job, I was thinking why clip it at the top of the dolly but of course you couldn't get upright at the end Scary stuff but well done, lovely house btw
@robertgreen7593
@robertgreen7593 8 жыл бұрын
Put a lockable clasp at the top of the trolley thing. As it first goes down you clasp the cable to the top of the trolley so the pivot point is high up. That will stop it leaning to the sides.
@onecircuit
@onecircuit 8 жыл бұрын
You read my mind. :)
@devilmaster73
@devilmaster73 8 жыл бұрын
and also, in addition to welding an eye to hook to, that is centered, instead of hooking to the axle, perhaps cut a notch on the flat top part of the runners so that the top of the dolley handle could run in a groove to keep it centered, instead of adding wood to keep the runners centered.
@RobLlewellyn1
@RobLlewellyn1 7 жыл бұрын
This is where my thought process went too? Love the entire project. Great work
@nellen55
@nellen55 7 жыл бұрын
i really love you're channel
@grandis74
@grandis74 8 жыл бұрын
Awesome video. I thought about the sliders boards as well, preventing it from going off. One idea is to cut a groove in the boards, wide enough for the wheels. Then the wheels and the top metal frame of the dolly can slide in its tracks. IE, cut out a little bit in the middle of the slider boards.. I guess the whole board would start sliding then instead, if they are not attached to the staircaise in some way. Hm.
@grandis74
@grandis74 8 жыл бұрын
Ah, I'm too slow. Already suggested below =)
@petervachon6989
@petervachon6989 6 жыл бұрын
Hey Adam, nice work. Do you think the width of the ramps are a bit too narrow? I'd have made my ramps a bit wider to allow for any slippage. I'd have also placed a hook for the top end of the ramp to the top of the stairs so that the ramps would stay in place and not slip. I'd maybe add some non-slip coating to the ramps as well. Overall, a good job. By the way, any chance on converting the winch from DC battery to AC power?
@johnvictor9071
@johnvictor9071 8 жыл бұрын
What about attaching some triangle blocks the to top and bottom thirds of the runners? This way the runners can still collapse (just wouldn't be perfectly flat), and they would be more stable on the stairs, and possibly lay more square. Instead of just the corners of the stairs taking the weight of the game, some of the steps themselves would be doing the job as well.
@puddingpimp
@puddingpimp 8 жыл бұрын
Hmm, what about getting one of those RF momentary remote controls and a couple of 30A relays, and hacking up the winch to be operated by the relays? Then you can have the remote in one hand and the other hand on the top of the cabinet guiding it as it moves.
@Riz2336
@Riz2336 8 жыл бұрын
That's a great idea man.
@adamcartermi5
@adamcartermi5 8 жыл бұрын
If you use a table saw you maybe able to create grooves for the dolly to follow
@Compucore
@Compucore 7 жыл бұрын
Usually the corded drills are maximum of 1700 rpms. My suggestion here. The angle iron that your using there if you knew what kind it was for the cutting speed for the material. You could find the proper speed for the bit itself. I used to learn in highschool training as a machinst. For that I know of formula is (cutting speed of material) x 4 / the size of your drill bit. Once you get that you'll have the rpm that you need for your drill bit. Ands any kind of coolant definitely helps to keep the drill bit cool.
@joakimglysing5178
@joakimglysing5178 8 жыл бұрын
Great job Adam, one thought tho. If the hook somehow would slide to one of the sides of the trailer. Wouldn't the game wobble heavily to the side?. Maybe you should make a weld a "center-guide" for the hook.
@onecircuit
@onecircuit 8 жыл бұрын
Right I think I mentioned welding the hook right onto the dolly in the video. Agreed.. just using a hook/carabiner of sorts wouldn't work. It has to be fixed to the dolly.
@flightofapaullo72
@flightofapaullo72 8 жыл бұрын
That was.....Cool!
@brentneill3501
@brentneill3501 8 жыл бұрын
I did something similar to this to move a 425lb hot tub up and down stairs except I used a come-along, a manual chain hoist, and a hand truck
@Neffers_UK
@Neffers_UK 8 жыл бұрын
Excuse the very very crude sketchup, but something like the pic shown would be much better than planks hinged together held by screws in end grain. Having some angle iron that fits inside the dolly to stop it sliding away, connected by some simple to make I frames will not take too long to assemble. You could use coach / carriage bolts (the domed topped ones) with wing nuts just to hold the assembly together while in use. i.imgur.com/auzDKGu.png hope this makes sense / helps inspire ya.
@lonnymoore2622
@lonnymoore2622 8 жыл бұрын
Nice job welding he he looks like some of the welds I did wen I was working for yorozu
@shovelhedded
@shovelhedded 8 жыл бұрын
I'm terrified for the first time you forget to stop the winch from turning freely. Pretty cool stuff, though.
@Vault87supermutant
@Vault87supermutant 7 жыл бұрын
It'll be down very fast though
@Boomer8003
@Boomer8003 6 жыл бұрын
Wife: honey I think the garbage man is here. Husband: no, it's our neighbor.
@garysweetland32
@garysweetland32 8 жыл бұрын
I like it.... But I think I would have made a small swinging Davit crane with that winch, that could swing out and lift a game vertically. And then put a gate in the hand rail to swing it through. You could simply drop the crane into a reinforced hole in the deck when you needed it. And lift it out and stow it when you didn't. Or just put a weather proof bag over it.
@onecircuit
@onecircuit 8 жыл бұрын
+Gary Sweetland Time and money :)
@garysweetland32
@garysweetland32 8 жыл бұрын
I here that.... You have a good working sytem now. It was just one of those hindsight moments I had while watching. Keep up the good work. I love the PCB repair videos, not that I fully understand them....... :)
@bengrogan1992
@bengrogan1992 3 жыл бұрын
You probably should have made the steps wider for the biger games like the ones you sit in just in case you get one just a thought.
@MadMatty72
@MadMatty72 8 жыл бұрын
Don't use a hook on top rail, rather create a guide and ensure the cable is within it when you place it down after taking up cable slack(which is probably what you meant) - that will definatly stop it steering off course as you stated. I would have welded up a base plate for the roller and placed it directly on the step and incorporated a spacer as well so as to avoid unsightly spacer and excessive bolt/holes on the stairs. With such a setup, due to cable angles, the roller assy would be pushed into the plank/upright intersect of the top step anyway therefore only needing minimal securing for safety, e.g. only one bolt through the upright (not unsightly and easier to remove).
@marcelcevani5688
@marcelcevani5688 6 жыл бұрын
:) Great one
@tigheklory
@tigheklory 7 ай бұрын
Came back to ask how the game elevator is doing?
@kevlarunderwear22
@kevlarunderwear22 8 жыл бұрын
youre the man adam
@chuck12-82
@chuck12-82 8 жыл бұрын
Instead of a hook I would make a U bracket welded to the dolly and the cable would ride between the U and would travel straight down.
@johnmcgaghey1127
@johnmcgaghey1127 7 жыл бұрын
good video, thanks!
@robertgreen7593
@robertgreen7593 8 жыл бұрын
I think I would have gone the crane route, with a swing arm and winch on the other side of the platform, with a lift cage thing.
@thefirstbrianmiller
@thefirstbrianmiller 8 жыл бұрын
very cool
@robertgreen7593
@robertgreen7593 8 жыл бұрын
Ah, there you go, top hook
@TheInferno
@TheInferno 8 жыл бұрын
cool vid
@countlesscubes6166
@countlesscubes6166 7 жыл бұрын
For the part where the game is drifting, put pieces of wood on the track to keep it from drifting
@CoindoorDave
@CoindoorDave 8 жыл бұрын
You forgot to mention Omega Race in your intro! We OR owners need to stick together! :-)
@nateyboy12
@nateyboy12 4 ай бұрын
When are you gonna let me be your cameraman again?
@exhstbearing
@exhstbearing 8 жыл бұрын
The thumbnail for this almost looks like you are riding the Junior!
@onecircuit
@onecircuit 8 жыл бұрын
I am. :D I climbed inside of it for the thumbnail
@okkyadit2
@okkyadit2 4 жыл бұрын
Double Dragon is very valuable
@therealsupergenius
@therealsupergenius 8 жыл бұрын
I always say bolt when I mean nut, too.
@JamBurglar
@JamBurglar 8 жыл бұрын
Haha, that's awesome. By your next video you'll have gained 20 lbs!
@jerrypaul930
@jerrypaul930 6 жыл бұрын
Make a removal deck floor winch it up from there
@firebird8600
@firebird8600 8 жыл бұрын
51 minutes in, and I'm wondering what you would do if the cable isn't long enough to actually get to the bottom.
@onecircuit
@onecircuit 8 жыл бұрын
I measured before I bought the winch ;)
@firebird8600
@firebird8600 8 жыл бұрын
OneCircuit Good call.
@Nyhetskanaler
@Nyhetskanaler 8 жыл бұрын
Nice
@NukTap
@NukTap 7 жыл бұрын
this is like a colin furze video, but with lower pace and no fire.
@arcadeworkshop4167
@arcadeworkshop4167 8 жыл бұрын
Adam, i think its time for a ppclone update video...
@Ineedagoodscreenname
@Ineedagoodscreenname 8 жыл бұрын
I would weld/drill an eye bolt at the bottom of the dolly and a j hook at the top so you can unlatch the cable at the top of the stairs to stand the games up (vice versa). This setup would steer it straight on your runners and rather easy to setup. Looks great!
@Ineedagoodscreenname
@Ineedagoodscreenname 8 жыл бұрын
I guess I should of waited until the end :) let us know how it turned out.
@tigheklory
@tigheklory 8 жыл бұрын
Adam you are the best, it's more like a huge dumb waiter.
@cousinace3798
@cousinace3798 8 жыл бұрын
haha yea
@American_Made
@American_Made 4 жыл бұрын
inside rails bro... 1x2 on inside of the flat boards.
@lbsiuk
@lbsiuk 6 жыл бұрын
Who else watched the entire video?
@quicksilver-pk3nc
@quicksilver-pk3nc 6 жыл бұрын
Or, you can buy an escalara...
RARE SpaceDemon PCB Repair
27:43
OneCircuit
Рет қаралды 8 М.
Building a Massive LEGO Tank
17:56
Brick Technology
Рет қаралды 392 М.
Мен атып көрмегенмін ! | Qalam | 5 серия
25:41
Quando A Diferença De Altura É Muito Grande 😲😂
00:12
Mari Maria
Рет қаралды 45 МЛН
2/2/19 Pole Position Clone Status and Overview
9:29
OneCircuit
Рет қаралды 6 М.
The Best 20 ESP32 Projects of 2024!
14:44
ToP Projects Compilation
Рет қаралды 40 М.
Inexpensive house in 5 days. Full construction process
35:06
Dad builds a house
Рет қаралды 307 М.
His Wife Threw his Gaming PC out the Window… Can I Fix It?
19:43
Linus Tech Tips
Рет қаралды 1,2 МЛН
BrokenToken DK Repair x3
32:53
OneCircuit
Рет қаралды 8 М.
Playing Music on the Oldest Running Computer in America!
27:06
Usagi Electric
Рет қаралды 97 М.
$100 Double Dragon Craigslist score! - Repair and Tuneup
44:07
OneCircuit
Рет қаралды 11 М.
Cherry Bookshelf making
34:55
GR Woodworking
Рет қаралды 9 М.
Мен атып көрмегенмін ! | Qalam | 5 серия
25:41