My BMW was a 2010 and the part can be ordered online or simply get it from a dealer for about $60.00-$70.00 bucks. My
Пікірлер: 38
@ferrisl210 ай бұрын
Extremely helpful, thank you. Bought the part on eBay for $25 and you saved me $180 from having to bring it in👍👍👍
@JAYG6390 Жыл бұрын
Mines just broken, and your guide shows this is a very easy self repair. Thanks for the video!
@yummytummy882 жыл бұрын
My mechanic want $150 for 2 hours of labor charge to change the parking break module switch. With your video assist. It looks like a 15 minute job. Thanks Bought the replacement for $110 online, genuine BMW parts, generic is roughly $40 available too.
@tomchilders3 жыл бұрын
This is a pretty easy job with plastic tools for interior body work (which you can buy for $10). My dealer charged $154 for the switch, so I highly recommend buying it online for $30 or less.
@billmorgan49333 жыл бұрын
Thanks. Took about 10 minutes. That tiny torx screw driver I think is T8, or that's what worked for me.
@JohnHuthmaker4 жыл бұрын
Swapped mine out in about 10 minutes flat. Thanks.
@srenpeterhansen4384 Жыл бұрын
Thanks for the video, it was very helpful for my installation
@shawntran94544 ай бұрын
Thank you!
@timjohn74832 жыл бұрын
Thank you very much very useful
@ROYKN6WBK8 ай бұрын
Very helpful! Thanks!
@user-xz5ue9dx9n5 ай бұрын
매우 좋습니다. 감사합니다
@CaliforniaLifeJourneys2 жыл бұрын
I just dropped off my car at the dealership for this replacement and some service, if they send me $500 quote tomorrow, I’m totally replacing it myself
@ivarsmatisons11 ай бұрын
Paldies par informaciju 2:31
@mohammedalqabbani22766 ай бұрын
Can I just replace the Botton without changing the whole part? My car is bmw x6 2017
@lemars.90267 ай бұрын
You may find these tips helpful: - to loosen the plastic I used a wide plastic wedge - take a vacuum cleaner and cloth aside to remove the dirt - if the connection cable is not that long. Stuff a cloth under the blue plug and let it hang out on the side. Now press the component onto the blue connector. When the handbrake is connected, you can pull the cloth out.
@michb74145 жыл бұрын
ThankX 4 video, never fails, April 24th 2014 my warranty expired, my parking brake switch is cracked and won’t last long grrrrr. What special tools will I need to DIY? 2015 BMW 528i. Thank u buddy
@vitalijvitalij17982 жыл бұрын
thank you men.....
@user-hq9zy5mw1k Жыл бұрын
I have a fault with the electric handbrake. Did my warning light come on?
@jahangirhaiderify2 жыл бұрын
My f45 wont engage parking brake. Parking switch is lose and when pulled it just stays up. Anyone knows if i need new module.
@denchocoolingservicesbv58996 жыл бұрын
I like this music, what is the name of this music
@JohnHuthmaker4 жыл бұрын
Shazam says its "Ravet - Steve-Fresh"
@howardtaylor21063 жыл бұрын
What’s is the parts number?I have a 2014 bmw x6m
@julietsabat79053 жыл бұрын
Where can I get the plastic tools to pry or remove the cover?
@ridetools692 жыл бұрын
Sorry for late reply. Amazon is where I got mine.
@RoboSevald3 ай бұрын
I have same issue with this switch, mine parking has fault code, did you have same problems? I checked hand brake actuator (module) everything seems to be OK.
@BEN-lo6fn13 күн бұрын
me too, do I need to replace brake actuator? how to check actuator if working? thanks
@omarshehab3070 Жыл бұрын
من اين اشتريه وكم سعره تقريبا ؟
@libenyi Жыл бұрын
what is the part number or website you bought?
@domingosstevensdesa67216 жыл бұрын
Do you have to disconnect the battery to replace the parking brake switch?
@zoltanvass50584 жыл бұрын
I did. Just to be on the safe side. The battery is in the trunk, just remove the Negative, that will do.
@ridetools693 жыл бұрын
I did not
@haider61662 жыл бұрын
@@ridetools69 does it throw any code on the system if battery not removed? thanks
@nelloization3 жыл бұрын
There is only ONE thing that’s hard about this process and that’s getting the fascia off at the start. Why did you skip over it? So unhelpful.
@ridetools693 жыл бұрын
Sorry the video was not helpful. My plastic was not difficult to remove. Maybe others can see this and find the actual point of connection where you need to pry the tool. Sorry again.
@nelloization3 жыл бұрын
@@ridetools69 Thanks for the reply, and sorry I was grumpy. The rest of the video was great, but it really was the only hard bit - especially to not damage the clips!