DIY Cummins Swap - Our HD High Mount AC Bracket Kit

[@Fixinjunk]

Cool video! glad to see Cummins swap parts like this are being made by someone.

[@lanceroark6386]

Just got my kit in the mail yesterday.....and a card. Thanks, Jonesy’s!

[@ricardojones9994]

How to get to jonesy

[@PenningtonFab]

Wow, I just got my kit. The customer service is awsome. All of the videos are great and very helpful. This is definitely a Great Company to deal with. Thank You Very Much.

[@Jonesys]

Thanks so much Michael!

[@dante04srt]

Hey Joel, I'll be getting back in touch about the brackets/parts goes my 98 K3500 swap today or tomorrow. The family and I decided on a last minute camping trip so I've been out of town the last few days. Thx

[@dante04srt]

Finally got my AVNW high mount kit mounted and all of accessories bolted up. The fact that it uses a stock Cummins length belt is a plus. Can't wait to get the rad/IC in the truck and plumbed and finally get to drive it!!

[@Jonesys]

So happy to hear that! And good work getting it done.

[@ryangarrett7281]

Wasn't fun getting that belt on though was it? Tight fit

[@MrBryantharrison87]

@@Jonesys are y’all still in business

[@enriquetorres6069]

Cant wait to do a Cummins swap on my suburban k2500 🤟🤟

[@davidcunningham7614]

I want to add that High bracket design for a 48 volt alternator to charge my battery bank, instead of AC. I have a 2000 Cummins 4Bt in my food truck and keep the 12 volt original for starting

[@JuanMendez-dg4qt]

when you guys will have this kit available again? thanks

[@ArcticAstrophysics]

Doing a 12v cummins swap into my 84 dodge ram this year already have the donor truck, I can't wait to buy this kit, it will put the a/c compressor right in the same spot as it is on my 318 so hopefully I can run the same custom made hoses I had made. Running a Sanden 508 compressor now, do they make a Sanden SD7H15 with the same inlet and outlet as a Sanden 508?

[@elielhernandez2465]

Awesome 👍

[@Jonesys]

Thanks for the support!

[@PeterHatch-mx7zc]

Great I think you could help out on this for my build

[@Jonesys]

You can purchase this bracket here: adventurevehiclesnw.com/shop/diesel-conversion-parts/chevrolet-gmc/73-87-chevy-truck/b-series-cummins-hd-high-mount-ac-bracket-kit/

[@Southy318]

Do you still make this kit for 24v

[@kevinhail2187]

I'm wanting to use my ac compressor that was on my 6.0 and put it on the 5.9 6bt non intercooled 12 valve cummins do you make the bracket or can I use the stock 6.0 bracket. What's the best way

[@PoorBoyGarage]

Do you have a kit with the stock 90 upper housing for use with and stock 95 set up?

[@Dakota_Conrad]

Is there a water inlet that turns 90° straight down?

[@paulhyde4979]

U have to run a 2nd gen fan hub pulley bracket for this kit to work of can I continue to use my 1st gen fan hub pulley bracket??

[@andy112782]

I have a 2000 c3500 obs this kit uses the dodge ac compressor do you have conversion lines to go from the dodge compressor to the Chevy side

[@diyoregonnowtexas9202]

Today I picked up a 1993 12v I want to put into my Chevy k3500 truck. The truck has the 5 speed manual. I understand the shaft on the transmission will not fit with the cummins, but I can replace the shaft with correct tooth pattern. Is that correct? If so, do you sell the shaft or kit I need for this?

[@h1_maniac153]

Will this work on a 6.7?

[@carlosadame4405]

A I have a cuestión am about to do a swap on my Chevy can you help me

[@JohnSmith-qj4cf]

Could you give me the site to buy your parts please I need that bracket

[@Jonesys]

Sure thing, the site is www.adventurevehiclesnw.com and the kit is found directly at adventurevehiclesnw.com/shop/diesel-conversion-parts/chevrolet-gmc/73-87-chevy-truck/b-series-cummins…t-ac-bracket-kit/ Thanks!

[@JohnSmith-qj4cf]

@@Jonesys thank you!!

[@richardstamp2410]

Will this kit also work on a 5.9 24v front engine mount as used on BlueBird school buses?

[@wadebond7679]

He addresses it in the video..24 valve upper water outlet is different

[@dante04srt]

Do the Dodge/Cummins compressor use the same mounting pattern as the mid-mount compressor?

[@Jonesys]

Same bolt pattern but different belt offset. They will not interchange.

[@Colchero5310]

This change is for ford 1997 with cummins 5.9 12 first generation and what is the part number and where can I buy ........... thanks

[@Jonesys]

adventurevehiclesnw.com/shop/diesel-conversion-parts/chevrolet-gmc/73-87-chevy-truck/b-series-cummins-hd-high-mount-ac-bracket-kit/

[@kingchristoferobin4356]

I'm trying to find an ac compressor bracket for a 2000 5.9 cummins motor. Cummins said its a ford part. Can anyone help me

[@Jonesys]

adventurevehiclesnw.com/shop/diesel-conversion-parts/chevrolet-gmc/73-87-chevy-truck/24-valve-b-series-cummins-hd-high-mount-ac-bracket-kit/

[@ricardojones9994]

I need this kit where can i get one

[@Jonesys]

www.adventurevehiclesnw.com

[@ricardojones9994]

@@Jonesys can i get your email are contact number?

[@rafaelesantamaria6653]

How can I get that kit?

[@Jonesys]

Here you go: adventurevehiclesnw.com/shop/diesel-conversion-parts/chevrolet-gmc/73-87-chevy-truck/b-series-cummins-hd-high-mount-ac-bracket-kit/