DIY Deck Drainage System

This DIY Deck DrySpace video is all about how to install deck dry space from start to finish. This DIY Timbertech AZEK DrySpace system is an easy way to have a dry patio right underneath your deck. Bring Your Own Tools (#BYOTools 168).
HUGE thank you to TimberTech for sponsoring this week's video. Check out their amazing product line HERE: www.timbertech.com/
Apparel List:
-Georgia Boots: bit.ly/3yZ4M6J
-BYOT Shirt: bit.ly/2T6l8dE
-Work Vest: amzn.to/3ge4jou
Material List:
-DrySpace: bit.ly/3AGz1Sz
-2.5" Wide ProTac: amzn.to/3zt5U3u
-4" Wide ProTac: amzn.to/3P0TR2X
Tool List:
-Drills amzn.to/2SbHzO1
-Palm Nailer amzn.to/2RvgW1A
-Air Compressor amzn.to/2IzBeEo
-Tape Measure goo.gl/nguoOO
-Speed Square amzn.to/2FrIuQK
-Contractor Square amzn.to/2TER2O5
-Table Saw: amzn.to/3pKHCgI
-Chop Saw: amzn.to/3PJWzKL
-Utility Knife amzn.to/2SsOToC
-Chalk Line amzn.to/3xSZjwM
BYOT News Letter byotools.me
BYOTee Shirts Available NOW! teespring.com/byotools
Instagram / byotools
Facebook / byotools
TikTok / byotools
MUSIC:
Min0:00 - Venice Beach: Topher Mohr & Alex Elena
Min14:01 - Pata Pata: Miriam Makeba (Matt Cherne Remix) www.chernebeats.com
#byot #diy #howto

[@markdichiara9486]

This appears to be a great solution but I priced out my 11'X15' deck at Home Depot today. Over $1,600.00!! For some plastic! Either Home Depot or AZEK are insane. I will get another price but will never pay close to that.

[@bachtam9161]

I read the entire Ryan’s kzbin.infoUgkxGqOCINHE0Z0E5gxzSdNi9NWGugRY5Hm2 Plans and was able to make a shed plan. Using Ryan’s Shed Plans alone, the shed itself is great. Where I wish I knew more is with respect to ground preparation and foundations. Maybe that's beyond the scope of Ryan’s Shed Plans.

[@cortneymullen9164]

I’ve been looking at a good system to get for under my deck and all other videos I’ve seen always seem to NOT show the reality of blocking or double joists situations we all face. Very nice video you did here. Great job and love how your project turned out.

[@theglampman3785]

How can you monitor then wasp nests being built in this space?

[@pnowikow]

I like it when people show their errors. Some channels make everything look perfect the first time

[@dc5duben96]

great job i love watching ur videos always really informative & entertaining

[@htownblue11]

Very cool system to highlight Brent. I never knew this was an option.

[@posiguy]

Nicely done Brent!

[@blyatberry7036]

Great idea :D Great work!

[@patrickmckowen2999]

Very nice 👍 Prior to me know about this stuff on my last deck I did a system using some strapping and vinyl siding. Worked well but I noticed over the years a build up a dirt and pin tree debris. Cheers

[@JustTheFactsYall]

Thanks TimberTech I’ll see you soon 😁

[@JustTheFactsYall]

This is the best idea ever! Wish I knew why I always get the notifications a day late.

[@azcrazy333]

This was super helpful! I'm curious if the joist spacing was narrower for the double and triple joists and if you needed to decrease the width of the v channels. My deck has joist extensions that go from double joists to single so I expect that's going to be tricky. Thx!

[@eszyx8062]

Amazing!

[@Condor1970]

So how do you clean that out when it gets full of Douglas Fir needles in less than 1 year? This must be an option only for inner city use, with no surrounding vegetation.

[@daryushbagherzadeh5845]

Great job and video

[@JustTheFactsYall]

I’m about to do this! No going to say I haven’t done this with a tarp before 😂

[@gustavofelipe5948]

Great video. One suggestion, add a piece of flat metal counter flashing to the rim joist as a splash guard before you install the gutter. This will keep water from getting between the backside of the rim joist and the gutter. Great clean job!

[@user-hu7cx9rq4p]

Just screw corrugated iron under the deck. Cheaper, quicker and last 30 years. Also will not rot out the wood as you can put the rubber o rings on the top to separate the wood from the iron. Can still install the guttering as well.

[@vcl6741]

Great job. I'm curious to know how you eliminate water from gathering between the joist and the combo bracket ?

[@verygoodboy2688]

I've never heard of this. That's pretty cool

[@BYOTools]

Thanks for watching.

[@AnatolianOutdoors]

Thank you for sharing🙏

[@tylersmallman]

I did the same thing using some stripping to create a slope and then screwed clear polycarbonate roofing sheets. Let's light through and kept me dry

[@davidtady12]

it last pretty well?

[@manuelcastillo8472]

Love it 🫶🏻

[@spiroschristoforatos6016]

Great set up, and I have something similar on my deck. I have some trees near the deck and the debris that falls between the cracks on top of the deck end up trapped in the corrugated material I have under the deck. Any suggestions?

[@jimbujold5586]

Wow, great work! Thank you so much for the pain-point tips (cutting, tool tips, soap, etc.). I have the same situation. I’ve been wanting to do something like this for a long time (and enjoy the outdoors, even though it’s raining a little). I think I’m finally motivated! PS: can someone please point me to an easy / simple ‘ Flagstone/ Pavers ‘ video?

[@thomasjones1778]

Thats a lot of work. I used corrugated metal and continuous gutter system with no seams. And a lot less money.

[@spicynomad]

wow, i never knew something like this exsist. now i can stay clean and dry whenever i run to a deck for cover. thanks brent. i really should not be surprized though cause ive learned about other innovative things by watching you.

[@BYOTools]

That’s the beauty of this system. Thanks so much for watching and the kind words.

[@spicynomad]

@@BYOTools you are welcome!

[@aaronellingsen5404]

Yeah, but he got all of this stuff for free. This system is stupidly expensive for what it is actually composed of. One 16' V panel is around 50 dollars. The hanging brackets are about 85 bucks each. That's 135$ PER joist bay, not including fasteners, tape, starter track and gutters. A 20' deck is going to cost you around 3 grand- and that's if you do all the work yourself....

[@spicynomad]

@@aaronellingsen5404 i dont care, aaron. im not a tradesman and i cannot get into those trade shows unless. youtube videos have some incredible videos of things that are practical and can solve real issues.plus you find out here whats on the market so you can ask for it.

[@tr3vorb438]

There’s a problem with trapping moisture that runs thru the decking, down the side of the joists and behind the combo brackets. This will cause accelerated rot of the joists. This is further exacerbated by any pine needles or trapped dirt.

[@marcusmazza2255]

This is obviously the best solution without tearing up the deck… hindsight is 20/20

[@matthewlewis4559]

I'm surprised he didn't run the tape along the top of the brackets, because I immediately noticed it's not flush with the joists.

[@brettsurrett4596]

As with everything on a house ,there is maintenance. As with this system you will have to clean the channels. . Simply remove a deck board at the top if the deck and wash the debris out . Not difficult at all .

[@jwt1035]

@@brettsurrett4596 Remove the deck board? Are you kidding me?

[@jwt1035]

Totally agree with the OP. If they were going to install a system like this, it should have been upside down with the combo bracket on top of the joist prior to nailing down the decking.

[@JustTheFactsYall]

I would love to know they value that you’ve added to your home with all these projects. The one thing I wonder also is will it pay off because your neighbors may not be up to speed like you which changes market cost.

[@ds-imok]

Is there something similar to this but for a 2nd story outdoor balcony from neighbors shoving things through their cracks and overwatering their plants so that it floods below with dirty water?

[@srsorbo]

I just bought a home up in Skagit County. We have a carport with the roof that serves as a deck off our kitchen. Currently the deck is covered in a rubber membrane that is very soft in areas. The plywood underneath is obviously rotten. Ideally, I want to remove the membrane and replace it with a more traditional wooden decking. This product might be perfect for the roof of the carport, under the deck.

[@webncyber]

thanks for the video! Where did you buy this from? As their website seems terrible nothing is clear in terms of price size, how many comes etc...

[@ThoughtIwasFishin]

I had this system installed by a contractor and it looks great and works well. I have a few spots that leak at the gutter where the water doesn’t drip into the gutter, it tends to follow around the panel and misses the gutter causing a leak. It is especially bad during heavier rain. This same issue would be resolved with a drip plate, or panel, if it were on a house. Any suggestions on why this is happening, or what to do to stop it?

[@jamilaanaanta6788]

So i have a piece of land covered with wood in my backyard. I took all the paint away with some tools because the wood was starting to go bad. Every two to four years I have to scratch the paint away and paint the wood again. Is there a way to make my painted wood last longer??? I live in a country where it snows. Thanks

[@Mixwell1983]

I have a dual layer deck, underneath the main deck os covered with corrugated roofing so it currently protects my riding mower. Im about to get another mower in a zero turn so my older mower needs to be relocated underneath the unprotected bottom part of the deck. This system looks nice but im not trying to spent a grip of money. Im thinking some cheap corrugated metal with a partial overlay and maybe using a 2x4 on one side to give me enough slop to drain water..

[@henloco7513]

Meh there’s always someone who knows how to do it better lol. I know because I’m in Enid this people, however, this video it’s done properly where it gets to the point it’s definitely detailed, but it doesn’t drag you along well done, sir. Makes perfect sense how all the components work together actually, attempt something like this in the future. Thank you for sharing.

[@jimmyjones2681]

i need this in NJ order ready....

[@robertjohnson2537]

What stops water from going between the joist and the panel but at the bottom of each joist? Seems like water would run between these two edges and be trapped at the bottom of each joist?

[@Moondoggy1941]

So this is exactly what I need to update my 30 year old wood lattice patio cover, we want shade and rain protection, my wife wants it torn down and have a aluminum wood patio installed instead. The wood is till good, it just looks rough, it needs to be painted, It was very expensive wood 30 years ago today it will make you sit down. What would you recommend for the top, out of site out of thought but it will still rot in the elements? The patio is 14' x 25', the stringers are dual separated by a 4" x 4" and three feet apart. Very typical patio. Thanks in advance

[@bigdocus]

Thanks, great vid. I'm looking for something like this to use the area under my deck as storage. Although it looks like A LOT of work.

[@wilbgecko3249]

Don’t do it!

[@olliec1319]

@@wilbgecko3249 I did a bit of research, read some reviews and decided not to!

[@celesteamaral5498]

What was the reason for not doing it?

[@davejohnson6738]

Labor will be very expensive, this is a professional types of work. IMO.

[@sventime]

love it! How many hours does it take you to install?

[@vivianlong]

How did you protect top of rafter under Trex board ?

[@Deltaconcepts]

Can someone please explain how putting plastic over the bottom of the joist that is exposed to water will not rot it out in a few years? I am slow so please forgive me.

[@LitheInLitotes]

Will you still be able to pressure wash the deck? Or will the channels comes blasting out?

[@j2sw263]

Great video! Now that you have had it awhile, how is it to clean? I am worried about the system getting clogged up.

[@nobreighner]

One case that had sloped corrugated roofing under the deck did get all messed up from tree debris.

[@PNWLiving1725]

Will a camp fire pit sparks and fire ash melt holes?

[@gmangsxr750]

Could you use like a flex seal spray-on instead of the tape to prevent moisture from getting under the vinyl brackets? Wouldn't spray-on give you a more reliable prevention?

[@laramie5239]

This comment section is a bit negative so I'll add something helpful. If you need to cut a hole in a piece of plastic or thin PVC, you can just run your hole saw in reverse and melt your way through it. It's easier to hold still and leaves a clean edge.

[@bigguix]

the way your head moves, i'm sure you have ancestors in India ! :P

[@BYOTools]

does that mean my head moves fast haha?! Thanks so much for watching

[@angellas.1314]

@@BYOTools it’s the head bobbing !

[@JustTheFactsYall]

Your going to have to do a KZbin short when you get some heavy rain fall.

[@amadorodriguez6454]

Where do you buy this?

[@TheClutch90]

Why not just install corrugated metal ceiling directly to the underside of the joists?

[@jakemiller7760]

Joist get wet and water trapped between wood and plastic. Just use pond liner

[@jimmyjones2681]

where to order this kit ?

[@-7205]

I guess when you live on Lake Washington you can afford a system like that... Too rich for my blood... I have a 12 x 26' elevated deck and went the cheap route, a 2 pack of Costco tarps and a handful of 2 x 8 x 12 pressure-treated and made 1x strips, did tapered blocking, I gave the tarp a very slight belly in between each stringer, and when it comes to Pineneedles all you have to do is reach up and swat it with your hand and keep hitting them all the way to the end...and I made a gutter system from 4" PVC cut in half lengthwise Both ends of this tarp system are open so air passes through so no moisture problems whatsoever ... I did this as kind of a joke/experiment but I did it nice and clean...3 years later and it looks just as good as the day I put it in .... those Costco tarps are tough as nails... All of the pressure treated 1x strips and blocking I made show no signs of rot due to the pressure treated sealer that I put on them before I put them in place...

[@CollinsCorp]

How about capturing the water?

[@icecoldusa]

Great project, better when u dont hv to pay for materials.

[@bassichonda96]

Trex Rain escape is another product to keep the space under your deck dry. It goes over your joists so must be installed before decking. You did not do a good job explaining how sealed around the PVC pipe. Seems like you would have a leak around that also.

[@hilo4noff1]

So... Per square foot what's the price tag on that set up?

[@janemagee97]

❤️

[@BYOTools]

Thanks for watching

[@angellas.1314]

I would use this system in a heartbeat if the v panels were translucent! I would loose too much light.

[@nobreighner]

Very good energy. Needs to be directed to designs that will last.

[@jjdwnbyci]

Tape on back of gutter would help direct it into the gutter

[@derrickk4444]

Is it just me or doesn’t this prevent the deck from drying because there is no ventilation?

[@maxfriesen6103]

Is the paint on joists for waterproofing? Was tape put on the top edge on in side of joists, or is that supposed to carry water also? I have 17.5' between house and beam. Did I understand correctly that it comes in 16' lengths? This looks like it takes lots of time. Do the panels come in different widths? I have approximately 12" on center joists. I would love a response. My beam is 33' long. I appreciate your detailed descriptions. Great video!

[@Treehandler]

In the time you took to ask all of your questions you could have googled your answers and learned that the v panels come in 12’ or 16’ sections in either 12” or 16” widths. He taped all of the top of his joists with a 1’ overhang over the side. Incredible amount of effort is put into the entire process as well as filming and editing footage so maybe next time consider a quick google search.

[@CMZneu]

I don't get it why not just instal polycarbonate underneath or some sort of light weight plastic roofing, this seems like an overly complicated way to divert water with an unnecessarily large amount of parts taped together that will eventually leak.

[@milesmulligan6515]

Genuine question - how would you stop the water from just staying/pooling on the polycarbonate?

[@milesmulligan6515]

I just realized that you'd just have to install it at a slight downward slope and it would just run off the edge, you wouldn't even really need gutters unless you get a lot of rainfall and are worried about the runoff

[@iVolkswagen]

Yeah I also thought this seemed way too overkill. Just install a poly roof at a pitch and let it drain into a gutter.

[@CMZneu]

Also a polycarbonate roof would let more sunlight through which i think is the idea if you are building under a deck otherwise why even have deck.

[@angellas.1314]

@@CMZneu So the loss of light is the reason I didn’t go with this option. I kind of devised my own system, with polycarbonate cut in between the joists so I didn’t loose overhead space and doesn’t look tacky. The light filtering is amazing when looking out from below!

[@Airpaycheck]

How do you keep birds from nesting in the gutter?

[@jimbates6227]

My thoughts, too. I suppose hardware cloth could be installed in the gaps between the joists to protect the top of the gutter, but birds aren't my only concern with an enclosed system like this. In my locale, wasps are a problem. The underside of my 12x21 deck regularly has 10-15 wasp nests. Since my current deck is open underneath, I can simply brush the nests off. If I enclose that area, I no longer have easy access and the wasps can use the gaps in the deck flooring as the entry point. That concern makes such a system a non-starter for me. I like the idea but think it would end up being more work than it's worth. My deck has a full roof, and the patio below the deck stays reasonably dry, except with a driving rain. A system like this can't keep my patio dry in such a situation. Nice video though. Well done to the author.

[@knarf247]

awesome vid, too bad the company doesn't make this anymore :(

[@GreganDunn]

Wouldn't it be better if the system installed on top of the joists and kept the joists dry as well?

[@markdichiara9486]

If you are building new that is the way to go. This is better suited for existing decks.

[@patrapper7367]

It's cheaper and faster and more durable if you use sheet metal roofing just underneath

[@GreganDunn]

Got an example you can share?

[@AlainStar]

👏👍💪🔥

[@BYOTools]

Thanks for watching Alain.

[@onetrackfun3045]

what happened to the comment with the simple solution/less engineered?

[@franquil85conn]

You need to keep your fingers away from that blade 7:08

[@YouCanBeTheBass]

*does flip and lands on your lap*

[@thejacklegpreacher1793]

Any issues with wasps or hornets getting in there?

[@robax3r]

This kind of installation wil effectively make your deck rot faster.....

[@amosglitterz2649]

System? Did it years ago with opaque polycarbonate with slight pitch. Cost me 100.00. This is ridiculous.

[@CannibalSheepQc]

clean that thing now

[@mikewidget7610]

get ready for bees nests by the hundreds. You'll never have a minute's peace. Whats worse is you won't even be able to get to them to wipe them out. Wouldn't do this at my house if it were free!

[@FM-db3ft]

This is nuts, never mind the dirt that will collect and eventually choke off the water run. If you need the bottom to be waterproof, why even install decking, install a real waterproof floor and outdoor tiling over it.

[@lordviciousswede6148]

Nope. Don’t do this. Panting wood seals in moisture. Your deck will rot 10 times faster. Then slowing the water from draining faster is a recipe for disaster.

[@bdmski]

Looks great but I absolutely hate that it’s white. I wish they made their product in black

[@guyincognito320]

OVER-E-NUNCCCC-I-A-TING

[@jkreviea]

No. We're all wondering why you just laid down on a wet deck.

[@allanhundeby1675]

Yikes. At 7:09, his fingers are millimeters away from that blade. kzbin.info/www/bejne/hZPYd3aqprGLiKc

[@thatflywelshguy9662]

This kit is ridiculously expensive. $1200 for 16ft and 6 joists so 6x16OC so 16x8’ that’s a tiny deck. I have a 15x20 so 3 kits at $3600. No thanks

[@LifeSurfingDude]

u really like laying down while talking to the camera. man you don't have to get down all the way to my feet, standing will do.

[@batmannoso]

pura vista. todo mal hecho

[@danielzukeran7625]

That’s gonna leak around the rim and ledger. They discontinued for a reason. I hate dry space

[@kodiham7532]

Too much work for me. I'll look for a different system.

[@Dafod86]

American homes are fragile,matchbox kinda stuff

[@plasmaxer]

Sorry but you have a peaked cap on backwards

[@BYOTools]

Peaked cap?

[@klee4klee]

Trex Rainescape System seems to be a better solution than this. Trapping water next to the joist is scary and residual moisture could be a safe haven for all kinds of insects. I think Timbertech needs to develop a better solution than this.

[@kemetreasures5630]

Too much work

[@Divljak55]

So much work for nothing. You could just use roofing sheet. Faster, cheaper and more durable...

[@gantchoganchev6371]

Stupide idée

[@OnMeds1]

What's up with you laying down every time you wanna look at the camera Very strange dude

[@calebbarker9366]

That could be the worst install I have ever seen.....Ever heard of silicone. It also looks like a trailer park cover....