Patio Pavers Are Expensive. Do This Instead.

[@HAXMAN]

🔥I released an album of music you can listen to free! Let me know what you think! 👉 open.spotify.com/artist/1VOVKFOF2gmaiZysdVug2I?si=HUEvBHVzSDKfoayWUNO4vQ

[@DisabilityMatters-o3f]

I just found your channel. I am excited. Have you ever worked with dirt-crete? For grins and giggles you should make a project.

[@JiminyBillyBobIII]

8:45 You HAVE TO edge it, because these edges will break if you don't. Contrete (at least the normal one) is very weak if it's too thin, like on the very edge of the corners. So rounding them off makes it less likely to snatch something on it and makes for a thicker edge (looking from all sides and in all directions). A slab this thin and put outside is also quite likely to break if it freezes, (you should be deep enough with the concrete to stay below the frostline), but since I don't know where you live and if you have cold enough winters to worry about frost; I'll give you a pass on that one. But maybe mention this kind of thing for the viewers in the future? :)

[@ebk304]

Hey man I’m a Cement Mason and love your videos. I have one tip for when you are setting your forms and leveling them. You can attach your boards to the stakes first then just pound them down gently until they are level it really makes it easier especially doing big jobs like we do commercially. Well done 👍🏼

[@tlojewelrylove]

I have a probably dumb question but I want to make sure I understand it. Are you saying that when you nail the stakes to the form boards first, it allows you to more easily drive the forms into the ground and makes it easier to level? Thanks.

[@Drosenv]

I'm curious about this too, my skillset is medical not industrial, so I'm having trouble visualizing what he's describing. @tlojewelrylove

[@jimjam4210]

Stakes have holes in them so you can nail it into the board. Then you can pull or pound the stake in with the level on tip of the 2x4 to get it level. I believe that is what he is explaining.

[@fluffyminecraftpigs]

@@tlojewelrylove yes, if the board is already attached to the stake, if the stake goes down, the board also goes down. to be honest there are much easier ways to do all aspects of the forming that are not shown in this video, setting forms is very easy. the video doesnt really do it wrong necessarily, but he did waste a lot of time doing useless things, and you dont need to buy whatever weird flex forms he used cause those are prob hella expensive for something you can do very easily without it

[@fluffyminecraftpigs]

@@jimjam4210 pretty much, except most stakes dont have holes pre drilled unless you spent extra money on steel stakes, which you really dont need. a simple wooden stake from homedepot is like $5 for a whole pack and works just as good (unless you are beating them all day every day, then they will just break, and then i would absolutely agree the steel ones would be better)

[@matthewlee1469]

Bender board is just 1/4 MDF cut into strips, easy enough to make your own. if you make two layers and laminate with glue they will be rigid and require less staking. I also highly recommend doing integral stain over a wash, it just holds up better -- look for "iron oxide (red/black/yellow)." Believe it or not, the rain probably helped your slab. Adding water on top during curing helps keep the concrete from drying out and cracking as it shrinks. Nice firepit.

[@mrprfct7069]

I am glad I ain’t the only one making sure those looking down from a plane can see everything is squared and even. My kids think I am crazy.

[@HAXMAN]

😄

[@kimk3842]

I know........that is so important! 😄

[@ronniejohnson317]

I find it easier to screw up intentionally, abstract if you will.

[@cornbreadbrown4961]

we have a guy in a small yellow plane that sprays some of the local farms.. he always flies by our house REAL close, turning sideways and stuff for my kids... NO WAY i'm disappointing that guy with a sloppy fire pit!

[@1995texasaggie]

I'm not even interested in the project but watched from start to finish. Kudos for mentioning the names of all the tools, lots of "instruction guys" leave huge gaps in their delivery. I cussed for you when the roller hit the concrete.

[@skyrere]

I absolutely love your sense of humor. Your jokes always hit for me. Not only that, I love your family!

[@HAXMAN]

Thank you so much!

[@ThunderandLightningEvPickup]

Time for a TV show

[@johnrobbins9928]

I’ve been building all of my life and I’m 70. I’ve never heard of fiberglass rebar. WoW ! Something new. And you’re doing a great job. Good work !👍

[@jamespppyacek342]

Same here. 50 years in the trades.

[@frez777]

it's brand new!!!

[@byrongehrig8429]

Fast-forward 40 years, and all the sudden figerglass rebar will be the asbestos of the concrete world.

[@neukin]

I dont think id want to use it.. cool tho. When I do my rebar I mig weld the stuff together lol.. wont like messing with that wire tie method.. so steel for the win.

[@StapleCactus]

It's a pretty new product. Apparently, it's better because it will never rust away like the steel ones would. They like to market it as lighter, but I'm not sure why that's considered a selling point when the steel ones don't weigh that much (unless you're carrying them up flights of stairs or something). The issue is you can't bend them and cutting them releases fiber dust (though they say they have a tool to cut them that doesn't make dust).

[@tmcromerbooks]

Your videos are not only informative, they are hilarious. Thanks for the free entertainment and education.

[@asthecitysleepsofficial]

I’m a simple man. I see a Haxman video. I click like.

[@Keadil]

The sasquatch was a really nice touch, lol! 🤣

[@crazyredhare]

I came looking for this comment. They work for Jack Links ? Or what.

[@debrajames3869]

"Nothing says summer like pink." I hit subscribe as soon as I heard that and realized humor and silliness are part of this channel. 🤣😂

[@129stacey]

Me too!!!!

[@kimk3842]

I loved that! 🤣😂🤣

[@onelittledropintheocean]

He has a video on making a huge concrete rock for the garden & he tells us about his pet rocks, it's hilarious 😂

[@debrajames3869]

@@onelittledropintheocean I'll have to check that out! Thank you 🙂

[@kimk3842]

@@onelittledropintheocean Yes, I love watching his informative videos and all the while he makes me smile too.

[@adamritchey4209]

The reasoning for choosing the fiberglass rebar is spot on 😂😂😂. Always love these videos.

[@HAXMAN]

Thank you!

[@deanevangelista6359]

They cut like buttah, too!

[@chadmarkley]

I LOVE that you post the successes but also the screwups. It is super encouraging and helps keep me encouraged!

[@zardoz2627]

On those roller stamps... I found using masking tape at the end of the roller kept it on fine and Use your concrete mixing tray with a few inches of water in it and make sure the roller is really wet for each roll and you can apply the stamp earlier and it comes out great

[@americathebeautiful830]

Thanks for the humor. Appreciate your honesty too. Great job!

[@beerdrinker6452]

You make hard work, very hard work, look easy. Nice video.

[@HAXMAN]

Thank you so much! I didn't show the 10 gallons of water I had to drink while filming this. 😂

[@matthewpeterson3329]

@@HAXMAN Ha, yep. I saw the sweat dripping off your nose. Here in Phoenix, it might not be as humid, but it's hotter than a two-peckered goat in tight jeans. And I am dumb enough to do projects during summer. So yeah, I understand what it's like to drink 10 gallons of water and miraculously never have to pee. Great job as always, sir!

[@NetoEnriquez81]

For the Texture Roller, to help keep it on, maybe put duct tape on your frame roller to get snug fit when you put the actual roller on.

[@mrblue2715]

I have a level similar to that and I have installed my leach field, my septic tank and poured many concrete footings for solar installs using it. The trick is to get there at Dusk or Right before first light, then marking out what needs to be marked. That tool has saved me a lot of money. I Really enjoy your content and I find your editing and comments hilarious in a good way. Keep it up man

[@HAXMAN]

Thanks!

[@keywestdonor6954]

As a flooring, contractor, and a tile setter by trade, if you need a good laser level that reads in daylight spend the money and get the green ones.

[@peaceinwartimeable]

I had a home siding project. All fired up to use the laser. Middle of summer. So bright could not see. Then I found a pair of glasses on Amazon. Being a red laser, the red glasses absolutely made a huge difference. Bosch made them. They were harder to find and Noone had them local. Absolute must for outdoor daylight operations

[@sherylyoung101]

I really enjoy watching your tutorial videos. I love that you share your knowledge, along with the things that don’t work. Some people clean up all the videos and only show a really quick run through and a finished product and they don’t show the pitfalls of the project. This is what makes you stand out for me because a lot of the projects you’re currently doing are things that we would like to do in the future. Thank you for taking the time to teach others on KZbin. 😊

[@HAXMAN]

@@sherylyoung101 Thank you Sheryl! I appreciate that very much.

[@Will_Forge]

"why do you edge it?" isn't just to look good. It's also so that the curved corner doesn't chip as easily if something catches that edge. It's also just that much safer if you fall and hit it.

[@roxyqueen5076]

Don’t be so hard on yourself, buddy. You did good. I think it came out very very nice. Good job y’all.

[@EM1473]

About an hour before this video came out, I checked your channel to make sure I didn’t miss any videos. Great project, thank you for sharing!!!

[@HAXMAN]

I appreciate that! Thanks!

[@Sylvan_dB]

Looks great! The main reason to edge is to have a rounded corner. A sharp corner easily chips and breaks while a round corner is stronger (and helps to hide any imperfections on the edge). That roller coming off would drive me crazy. I'd be looking at putting a screw into it...

[@HAXMAN]

Thanks!

[@Bob_Adkins]

Or just a few turns of tape to make the roller fatter.

[@leoncarlson4537]

I'd like a price breakdown on this. Quickret, forms, mold release, re bar, acetone, pigment, base material, rental cost, and what ever I'm forgetting. $400 sounds awfully conservative.

[@TheFixFinder]

The plants in between the quarter pieces of the pad is such a neat idea!

[@craigpage1261]

That texture roller idea will be used soon. Thanks, man. Super cool pit!

[@Nox2024]

Love your content, glad you are making content again! I started watching so many other woodworking videos after I discovered your channel a couple years back, in fact I was watching one the otherday and thats what made me comeback to look for you! Keep up the great work.

[@HAXMAN]

Awesome, thank you!

[@AngelaWhelan-l3w]

You are a man after my own heart, if you can do it yourself that's the way to go 🤩👌I have made footstools from electrical cable spools, my own cushions and bed pillows from the stuffing from two large leather sofas I used to have, canned food, covered my bed headboard, made curtains and hundreds of items of clothes I even like to propagate my own plants from other people's plants. It's not that I am frugal I just love doing it, I wish I had found your channel earlier.😉

[@jamesawhalen]

Just as I was looking for something to watch & boom Haxman to the rescue 👌🏼

[@HAXMAN]

👊

[@Jay_the_Caffeinator]

Same here.

[@barbarianatgate2000]

Another great video! Love your projects. For future projects that need a laser line outside, they make glasses that are designed to help you see the specific color laser you're using. Normally about $15-20 per pair. You do great work arounds for problems you run into, but this will help make it easier for your next project. Great job.

[@HAXMAN]

Thanks for the tip!

[@danekillam]

I’m wanting to do this fire pit idea. Do you believe the air intakes would draw proper air if you’d had them lower and ran all the way out to the edge of your pad? This would keep the intakes hidden but I’m unsure if it would work correctly.

[@EricsBBQAndMORE]

How is it that Haxman isn’t at 1 million subs yet? Y’all share, let’s get him there!

[@HAXMAN]

Thanks brother!

[@zenlam5523]

Thanks for the info. I will borrow some of your ideas. I poured some steps with dirt-crete. Use cement instead of concrete and mix local soil as your aggregate. No stain needed, no leveling. Instead of smoothing it and then using a pattern roller, just use a vibrator and walk away. Looks exactly like what you made with less effort and cost.

[@ebk304]

You are the man! Well done sir! I’m very impressed by your work!

[@StopXfollowing]

The curved corners make a really nice finishing touch! Must have been worth the extra trouble (y) Well done!

[@urkiddingme6254]

You're funny. I like that. Never heard of pink rebar, but having once owned a fiberglass kayak I'm having trouble visualizing pounding on them without them shattering.

[@jasong9774]

As usual, informative and entertaining. Thanks for being you. (your family looks like amazing fun)

[@donnaworth2931]

While I have no plans to do any concrete work I really enjoyed your video. You’ve got a good sense of humor and beautiful arms!

[@lwood5375]

Looks great! I think it look good with some gravel laid out around it also

[@ChristineDuval-cy5ck]

I love it that you work as a team. I do mosaics. If you ever want to try it, put a few mosaics on the fire pit or the floor.

[@danieltrout9671]

You rock, not trying to pour too much. Edger is always a trick, but it seals the edge so it won’t Spauld. Turn edger the other way to scrape the edge when pouring the next phase. Great tool. Good job.

[@HAXMAN]

Thanks brother!

[@HotSeat17]

Thanks for all your hard work! I'm tired now. Going to take a nap .. Great job! 👍😁

[@tiffincatfan79]

I saved both your smokeless fire pit videos and now I see this! Ideas upon ideas and you make it look like I could do this too!

[@HAXMAN]

Go for it!

[@johankorten2797]

I use the lasers at dusk / dawn, that makes them much more visible. You could also use green glasses to at least see them a little easier. Red lasers are even worse outdoors. Apart from that, great project and thanks for sharing.

[@garymucher4082]

Screen it in like a gazebo and it would be a blessing to sit in there regardless of the temps or bugs... Make sure you have some type roof vent so when you have a fire in the center pit. Thumbs Up!

[@John-lw3if]

I love your casual everyday attitude. Definitely entertaining while learning something. Keep-em coming!

[@kimbanyc]

Wow. Gorgeous. Loved this. All so helpful as we look to redo our backyard. I especially like the finish and the stain. Had no idea how that look was ever achieved. Bravo.

[@ecko1882]

Man, you have me fiending to do this... I am nearly done with the heavy lifting on my garden and I can move into other projects. I promised my girls I would build them a new playset this year but papa wants a fire pit...they can play on that right? I'll paint it pink they'll never know.

[@HAXMAN]

Food first, then fun. 😄 My daughter Cameron wants a rock wall. I don't know if I can squeeze that in. 😄 Thanks Jacob!

[@stevekoch4]

Enjoy that your two work together! Refreshing...

[@thereasoner9454]

Great video sir. We all love how you explain all the good, bad, and learning moments in your videos. Almost never does a job go perfect, and it's good to see that in action. As far as edging difficulty, I suggest investing in a large heavier pro style edger as they make it easier on the wrists to get a smooth finish. Keep it up.

[@0991sirhc1]

So glad I came across this channel. Great sense of humor and honest. I'm subscribing for sure. Thanks for the content.

[@gatekeeper65]

I need a vacation. I could have sworn I saw a Sasquatch on your tractor at one point. Nice job.

[@TeRiFic05]

Looks like he only appears to some people. I saw him too. 😂

[@SusanSeriously]

Love it! Just an idea, could have still pulled a straight line at the height of the firepit and plumbed it down to the ground

[@trailguy]

I love the bubble on the level touching one line to create an outward runoff. I like your channel, btw.

[@ChuckP25.]

Hey Hax - Great job. The whole thing turned out really nicely. Thanks to Kim for her work behind the camera. Loved the cameo on the tractor by your son. He looks just like you. Thumbs up. Peace.

[@HAXMAN]

Thanks Chuck!

[@akontilis1792]

This is way more work than I can personally do, but what a beautiful job you did! And a very educational video!

[@Badenhawk]

I put up an easy up to finish off a small section of concrete at my house to keep the rain off. Worked well.

[@clarity4444]

Really enjoyed watching this project and loved your sense of humour😂well done👏👏

[@Idlehandzx2]

I watched your videos a few years back I lost ya because I didn’t suscribe. But love the new fire pit and that’s how I found you again lol lessons learned

[@HAXMAN]

Thanks!

[@missouriartiste]

Your property must be beautiful after all the work you have completed. Would love a tour sometime. Love your videos.

[@jaminboy]

Love the Purple Fire background music as well. Good info for me as this is something my buddy is doing now and will be doing in the upcoming days. Thank you for the great video

[@donreding314]

By watching your video one of the things I noticed your dogs really love you!

[@brettlyngstad]

So awesome to see you back at it! SQUATCH! 😂

[@HAXMAN]

Thanks!

[@Thea_MojaveOutliersWhipmakers]

Try some creeping speedwell in the crevasses between the pavers. It's sturdy, looks nice, and won't grow UP at all. You gotta water it, of course.

[@virgil3241]

So awesome. I miss my acreage sometimes, expecially when it comes to space to do things like this. I have one in the city, but I dont have room to build an area to leave chairs all the time, My old one was this big, but I did wood border with landscaping tiles and filled it all with pea gravel. 100% not as fancy as this, but was a lot cheaper and faster

[@jonathanstanton9219]

Some companies make reflective markers for outdoor/indoor laser use but you can use retroflective tape, or even just the strips on a safety vest to see that laser outside, hope that helps in the future!

[@HAXMAN]

Thanks!

[@eric9095]

Awesome content. Perfect delivery and style, I love this channel!

[@ARH1979]

I like that your dogs are helping

[@haus05]

looks good man! only problem i have with it is you didnt use any seperation against the fire pit and the slab. i personally would have put buffalo board around the base of the fire pit as an expansion joint because that will eventually heave a bit with the ground . other than that pretty sweet build

[@CaptSavoury]

I helped build a sandy in ground firepit once. Always wanted one in my own yard ever since.

[@davidwallin7274]

Luan board is awesome for forming in cement

[@PaiviProject]

Awesome job. Your firepit patio turned out really nice ❤

[@murraysissons1809]

Did you pull your pink rebar up when placing the cement? It should be half way up the cement.

[@jasonjtg21]

I like it. Looks great. I wasn’t sure about the stamped look but I like the finish product. Well done.

[@HAXMAN]

Thanks so much!

[@TimothyAB010]

I could see an open top gazebo that circles that firepit. You could even have a circle in the center for the firepit.

[@HAXMAN]

That’s what Kim wants me to build. 😄

[@rattlecat5968]

Been stewing about building a firepit with a huge pile of firebrick I aquired. That will be my Sept '24 project... once my chicken coop is finished by Labor Day! 🤞 (Yeah, you got me hooked with the coop videos!) Hurry up on that outdoor kitchen, Haxman! The weather turns pretty fast here in central NYS once October arrives.

[@keyvoz]

Eres un genio que realizas lo que se me ocurrió una vez, pero no sabía como realizar. Mis respetos.

[@HAXMAN]

¡Muchas gracias!

[@keyvoz]

@@HAXMAN eres mi sensei, mi Maestro 👌💪👏👏👏🙌

[@ClimbToGlory10thMntn]

The Haxman always delivers the goods! Awesome video and great work!!👍

[@HAXMAN]

Thanks!

[@wardenweaver3320]

I enjoy your humor and confessions of what you don't know. For things that you need, I would add that considering the frequency of rain, you may also need a pavilion.

[@travisjazzbo3490]

Nice work! I believe optimally you would raise your rebar about an inch off the ground to get in the middle of the slab, but given that this isn't going to be exceedingly weight-bearing, you will likely be OK. You can buy plastic 'chairs' to put under or just do something with a tiny pieces of wood

[@BraveHelios]

It looks like y'all might be in Flawrida! How about a video n how to stay cool in the garage as we try to work in there without withering away in the heat and humidita!

[@andys5562]

A follow up video on this after a few seasons would be nice. I would like to see if it settles and stays nice and flat or if they get all uneven over time. It seems like being only 2 and a half thick or so would make them so light that they will shift around a lot.

[@Mickbono06]

That fire pit is awesome. Brilliant job there by the HAXMAN & WIFE 💯🤙🏻

[@HAXMAN]

Thanks!

[@phillhart2990]

LOVE watching your channel man! It's literally my new favorite..

[@sb-si3lf]

That's a job well done.

[@brandon7219]

A HAXMAN DROP ON A WEDNESDAY!? YES SIR IM HERE FOR IT

[@HAXMAN]

I'm trying to pick up the pace. Thanks!

[@pdxcontent]

I just love your videos and your sense of humor. Keep up the good work.

[@davidshettlesworth1442]

Thank you for this excellent "how to" video. I learned a lot. Fiberglass rebar! Hot dog, I will be using some of that in the future projects.

[@HAXMAN]

Thanks for watching! You can feed a HAXMAN child by purchasing a shirt at www.thehaxman.com.

[@DisgustedGenXr]

What part of the country are you in. Im trying to gauge if some of your methods will work where I live. Hard to tell with the trees. Palmetto, Aust pines etc

[@XXPYR0XX]

why such a small pit also raised pits like that dont do the job its better to have it in the ground at least that way your feet will be warm.

[@JonCammarata]

Does anyone know where I can get an extra long bolt for my timber saw attachment? All the stores are sold out.😅

[@netherlandhomestead]

Why is nobody talking about Sasquatch chilling on tractor😂

[@bradwarren5380]

A tip on using a stamp roller for stamped concrete. Use the Roller in one direction one time. Its not like painting a wall. Smooth out when ready use roller one time in one direction, and lift off at end of roll. Roll one time semi over lapping the previous roll.

[@GraywolfStacker]

Awesome job I'm a new subscriber I watched the fence now I'm this far in and hooked

[@michaelhurley3333]

Me 2!!

[@benjervis2538]

I’m going to use this method to build a raised planter for a tree fern in my garden. Really good idea to use that foam. Thanks for the inspiration

[@linkolinalamar5912]

A tip for your Rebar which you probably already know. When you place your Rebar, you want to make sure that it's "Floating" in the middle of your concrete. If any piece of the rebar touches anything that isn't concrete, it invites moisture, rust, expansion, ect. I don't know how much of an issue it is with fiberglass rebar but you have to be careful with the normal stuff.

[@qou2600]

A thought for keeping the stamp roller from falling off. Since it's not the same length as the tool you have room to drill a hole at the end of the tool and put a pin (bolt & nut or something similar) in it to keep it from sliding out

[@maryanngibson3690]

hey, great info, I just had to subscribe the first time I watched your stuff, BECAUSE I LOVE YOU SENSE OF HUMOUR. THANKS.

[@ericbengle]

Love watching your videos. Have learned a lot of new ideas.

[@thereseboogades8498]

Love it - just recently found your channel - awesome! Of course I subscribed & will be checking all your content! Im a girly girl learning how to complete cool projects. You are so funny & are such a great help! Greetings from Virginia Beach, VA. 😊

[@HAXMAN]

Thanks for subbing!

[@rescuegarage6616]

That was amazing please do a outdoor kitchen

[@maszaan7024]

you mentioned a cuople times about being harder with the pit. If were going to follow along and build this (which i plan on ). Pouring a round slab which is sloped then just pouring on top might be the easiest way ?

[@hola123147]

back drag your edger along form first. Hold it like at a 15 deg. and just back drag along form will help you out a bunch

[@StopXfollowing]

You also might want to learn about the swiss fire (lighting it up from a small fire on top of a pile of wood, to increase the temperature before the wood touches fire)( less smoke) I love the idea of a smokefree fire pit.

[@ramroad2008]

Use metal key joint for projects like this. It stays in. Also you don’t need rebar for a patio. You could add fiberglass strands to the mix or just get 5000 psi mix.