I came here from FB where I saw your pics. This is *exactly what I want!
@emilyvalin1986 Жыл бұрын
Great idea, but not nearly big enough for a boa constrictor, unless its a sand boa. Also, there is no ventilation on any of the enclosures in this video, this is not safe for long term.
@bigsam8597 Жыл бұрын
That's an easy fix. You can cut a hole in the top and add mesh. You could also drill more holes on the sides.
@IvLixer2 жыл бұрын
Thank you for the easy to follow video! Best one I’ve seen!
@whiteemperor9194Ай бұрын
13:15 part of do you put it exactly the hooks and the tie
@bmg35352 жыл бұрын
Yooo‘no I’m from Lubbock I was born there let’s go!!! Definitely gonna do this for my ball python
@Syberian1252 ай бұрын
Airflow? Infrared light?
@aspentree2423 жыл бұрын
This is so helpful! Best video of this kind I've seen!
@venomanonymous916 Жыл бұрын
There should not be condensation build up on the alls or glass Need more ventilation other than that cool idea
@mrmouse-ol9pw Жыл бұрын
My only issue is I don't see a heat mat, even on a thermostat won't get ambient high enough without supplement heat. How do u track humidity and heat levels?
@Theblankminer Жыл бұрын
I wish you would have gave a few more close up shots, instead everything being recorded at a distance.
@ryno_gaming402811 ай бұрын
If you want lights, just cut out a square hole like he did with the windows on top of the lid and use chicken wire.
@IrondoggReptiles3 жыл бұрын
What kind of thermostat are you running so you know what your temps are and to shut off the heat mat if it fails
@curtscreatures53013 жыл бұрын
Im ising inkbird dual thermos on all my stuff
@kingsreptiles7953 жыл бұрын
That’s really cool
@nickmarple35972 жыл бұрын
I’m bout ready
@torymaneveld948111 ай бұрын
Hi there. cool video. what is the dimensions of the black tub with yellow lid ball python tub?
@rachaelwillis60283 жыл бұрын
What happened to you?! 7 months since a video…. This was great:
@vikingfitness3842 жыл бұрын
Nice bro
@vucao41802 жыл бұрын
What are those white cube that you screw inside the tub to cover the sharp part of the cup hook? Ty boss
@mrmouse-ol9pw Жыл бұрын
Not sure he doesnt respond, but he showed that it was the zip ties. He snipped off the block and used it as a screw cover. I wouldn't even use that as it can scratch. Personally I'd use bolts and nuts, but if I did use zip ties it would be inside out not outside in. My two cents
@HiNinqi2 жыл бұрын
Do you think this would work fine with the sterilite tubs? the walls are a bit thinner
@dukemaui912 жыл бұрын
Yes I have a thriving 4 year old ball in a sterilite.
@TxCrystalMojo2 жыл бұрын
I am actually trying to make one of these for my ball, maybe my king too. So the heat mats do Not melt the plastic? Also can u modify the tops for CHE bulb usage as well ?
@ProfNicoschro77112 жыл бұрын
If you hook the heat may up to a thermostat then you can control the temp and make sure it doesn’t melt
@xenonentity Жыл бұрын
I have my bin modified to allow a CHE by cutting out a section of the top and replacing it with wire mesv, mine is a different design than the video but should still work
@mrmouse-ol9pw Жыл бұрын
Only issue with that is that u can't stack them!
@melisahamilton35253 жыл бұрын
What size is the acrylic sheet?
@matgallagher70422 жыл бұрын
why did you put hinges on it if you zip tied it shut?
@iwrath21962 жыл бұрын
cause they swing down and open
@yasven27433 жыл бұрын
Unlce i wanted to buy a bearded dragon and im a student so enclosure is expensive and then i asked to the bearded dragon seller can i do a enclosure using the storage box so he told me bearded dragon wont be alive until adult if its live inside a storage box is it true uncle?
@LeslieAnn713 Жыл бұрын
True you can look for BD enclosure built that won’t cost you much do your research BD dyi enclosures built on YT
@michaelrodgers6559 Жыл бұрын
Bearded dragons do not do well in humid environments. They are a desert lizard and need dry heat
@kassievizier65362 жыл бұрын
So you don't put ventilation holes at top?
@mobstercrow7515 Жыл бұрын
You could buy some very thin wire mesh and put some up top BUT don't add too much or else you will lose all of the humidity.
@thepatriotsrock28 ай бұрын
Hope u dont have lil ones
@swolelemur65963 жыл бұрын
do you make and ship these? I completely suck at making things lol.
@curtscreatures53013 жыл бұрын
I can yes send me a pm on instagram or facebook @Curts Creatures
@nicholasgonzalez61042 жыл бұрын
@@curtscreatures5301 hi , how much would you charge more or less to ship a boa sized 1 to orlando Florida ?
@dwightjackson83613 жыл бұрын
So in your tubs do you put vent holes at all
@curtscreatures53013 жыл бұрын
The vent holes are where the acrylic door sits against tub under the raised part you can see close up pics at curts creatures on fb
@dwightjackson83613 жыл бұрын
@@curtscreatures5301 thanks for the quick response. I enjoyed the video looking forward to more content
@rowismyname54043 жыл бұрын
Me: Watches the video Him: I’m building this one for a friend Me: can you build mine…? Later me: PLEASE…!
@Jay-du8rt2 жыл бұрын
What size is the acrylic sheet you used
@curtscreatures53012 жыл бұрын
Home Depot has pre cut pieces just get one that you like and trace it on tub then cut 1in inside that line