Thank you so much for your tutorial my Bro, my Honda civic SI just started to jump out of the reverse selection and I was freaking out. You saved me.
@ShadesWade5 жыл бұрын
good tutorial dude! definitely going to replace that shift arm to eliminate some up/down play. good look
@rehcvlee65774 жыл бұрын
What was the differences between the 2? Could have shown it better. But does it really helps with shifting better?
@OroDC52 ай бұрын
Did you put some Ultra grey on that last one?
@joseautomotivemedia2 жыл бұрын
Great video and thanks for all the knowledge!
@2blu4you12 жыл бұрын
Hey man, great video, used this one to do mine. Noticed your switched out your gear selector little mechanism. Noticed mine were a little chipped, thinking of getting it replaced. Not sure whether I should run OEM or Speedfactory, which one did you use to replace? Thanks!
@4bangermafia2 жыл бұрын
If you can afford the speed factory one, then definitely get that. You won't have to worry about it wearing down
@tsenhc2002Ай бұрын
So, did you solved your problem after replacing this?
@Colin-s5b Жыл бұрын
Where do I get the shift arm
@chevenesimmons80204 жыл бұрын
What happens if you install it backwards? I ask because after replacing my selector spings on my FA5 I hear a hissing sound when I let off of the clutch. Sounds like a bad idler pulley- but its not bc I replaced that and the lower pulley and the pcv valve. This sound is driving me crazy!!!
@Cristian-dv1wc3 ай бұрын
did you figure it out?
@waynenunes63484 жыл бұрын
What is the name of that piece ?
@4bangermafia4 жыл бұрын
I put part number in description
@tobinbuy33744 жыл бұрын
I recently bought an RSX base and decided to upgrade the stock shift springs to Mtec ones. After reinstalling my shiftier selector I am having problems moving my shift stick side to side. wont move up and down and I've triple checked to make sure all the parts are there. Has anyone else had this issue while installing Mtec shift springs / am I missing something? Any help would be appreciated!
@mrs_radrod5 ай бұрын
Did you end up replacing the shift selector? I replaced all the springs for mtech springs and have lots of forward-backward slop in the shifter. It makes it feel really imprecise.
@nicolaschavess3 жыл бұрын
What kind of issues were you having with the arm shift ?
@4bangermafia3 жыл бұрын
It's been awhile; but this is something to do before diving inside and opening up your transmission if you are having gear selection issues.
@allmotormannydc56124 жыл бұрын
I did this install with dentent springs and from 2nd to 3rd at high rpm it wont let me shift fast did I install shift selector wrong?
@4bangermafia4 жыл бұрын
Check to make sure your shift cables are ok. Its best to have someone shift through gears while watching the shift linkage. If you still have issues only while its at HIGH rpms it could be clutch or synchro related.
@allmotormannydc56124 жыл бұрын
@@4bangermafia it was going in now it feels like theres a wall not letting me engage like if my shift fork is bad it's only in 3rd too
@allmotormannydc56124 жыл бұрын
@@4bangermafia thanks for the advice aswell
@jsrebuilds39513 жыл бұрын
Thank you for the great explanation. This will help with my tutorial video on my K24Z7 transmission K swap DC2.
@Onelovej4 жыл бұрын
Best tutorial I could find thanks for the whole break down I just put in my springs and my fourth gear is really hard to go in I miss placed the washer the one thats on The spring itself I put it on the shaft By mistake
@uliciious4234 Жыл бұрын
4 years later and definitely helped me put my shift selector back together !
@Deemossi5 жыл бұрын
You def left no questions on how to do that. Nice job explaining it step by step. 👍🏽
@4bangermafia5 жыл бұрын
Thanks bro, I feel like I'm getting better at putting my ideas into a video.
@Deemossi5 жыл бұрын
@@4bangermafia yea theres def a learning curve to this, nothing comes over night
@Snaguar Жыл бұрын
Would this potentially fix my issue of having troubles getting into gears when at a stop and having no reverse
@vtectherapy79083 жыл бұрын
great video! had no idea this could be an upgrade that fixes some issues with going into gear
@Chargerbrothers Жыл бұрын
Thank you 👌
@jamesyoung56102 жыл бұрын
hi can this help with 2nd gear pop out and grinds?
@skippyturtle12 жыл бұрын
you know saying this piece and this piece go to this piece, doesn't really help. If you were to get the actual names of the parts, it would be a big help.
@4bangermafia2 жыл бұрын
Part number in the description
@dc5duben964 жыл бұрын
good vid, thanks for sharing this
@ek9build4525 жыл бұрын
🔥
@UhhMrZacro5 жыл бұрын
Nice video bro! 👌
@4bangermafia5 жыл бұрын
Thanks, got another coming right behind it from ClubRSX meet
@freeman___vlogs8035 жыл бұрын
Where can I buy one
@4bangermafia5 жыл бұрын
Part number in the description. Just search that on Google
@slowk24792 жыл бұрын
Hey so I recently replaced my shifter spring and I had it in gear. So now it won’t let me shift into 1, 2, 5 & 6th gear for some reason. Is there any way I can fix this? Would I have to mess with the shifter fork?
@mondecruel18662 жыл бұрын
did you find a solution ?
@slowk24792 жыл бұрын
@@mondecruel1866 yes, it was the transmission detent spring that I installed. Supposedly I stripped the spring and the skew ball, so I had to go to honda to order a new set
@K1DWOLF4 жыл бұрын
HOW CAN I BUY THAT WHOLE PIECE> THE WHOLE 6MT SHIFT ARM> AAAMCO STOLE MY WHOLE PART @4banger mafia