DIY life size Marionette

[@theflamingskulls2325]

Looks great. btw I was thinking that it may be neat if you made a endo skeleton to put the spring trap suit on. if you make it adjustable you may be able to pose it in the corner of the room and if it doesn't work out you'll have a pretty neat coat rack i suppose

[@atig51]

Thats just Springtrap inevitably living up to its name, a spring trap. I prefer not having FNAF in real life, thank you very much.

[@pikkeneater]

COAT RACK

[@MeowMeowScratchy]

Coat rack lol

[@samuellangford6126]

thats a good idea!

[@imnobody363]

@@cide5 he does are you dumb?

[@Mike14264]

What a beauty! I love how you made them very bendy, I feel like that's one of the best aspects of the Puppet's design that usually gets overlooked by some folks, usually SFM animators.

[@gaming2ebbrell136]

Awesome build, I don't think I'll make the full thing, but I printed the mask.

[@midnight_studios5424]

marionette looks amazing, and btw your creations are awesome!! keep up the amazing work!

[@KyrenShat]

its great! my only recommendation is to add multiple coats of each colour paint, it takes longer but in the end it makes it much nicer when there arent any spots where the paint is thinner. but who knows you might have a reason why you dont

[@Mike14264]

Maybe it's done on purpose to make the mask feel old and worn out?

[@paridem5754]

I can’t believe this guy only has 3800 subs. This is quality content keep up the good work! 👍

[@sendboiii2828]

The Marionette is very creepy, but this is way more creepy! Keep up the hard work!

[@senty12]

2:55 That spider really just said, "hi"

[@Muffin_Sammy]

Perfect! Other than the iconic, wavy, fingers-

[@fnafiscool8003]

i 3d printed this had to make it a bit smaller but how to build the arms and legs Edit:ok I’m dumb I didn’t listen properly for the arms and legs can I just have the old model for the arms and legs please?

[@ch4rliegaming]

looks amazing

[@DarknightZ0Z]

what paint do you use?

[@JackTim]

just a generic acrylic paint

[@DarknightZ0Z]

@@JackTim thnx

[@FuntimeDread]

Your Animatronics look so realistic! I hope that you do all the other "smaller" Animatronics and maybe even Vanny's Mask from The Curse of Dreadbear DLC :)

[@bagoratajczak7740]

This was awesome! Can you make a Minireena next?

[@hubbada6373]

How was your experience using the rotary tool on the print? Im thinking of getting one as well to sand small prints and fixing small details but im not sure if it will melt the plastic easily

[@JackTim]

I recommend using it on lower speeds and moving it around a lot. This stops it from melting the print. Also when in comes to small and detailed parts I wouldn’t recommend it. It work’s better for large surfaces. Well at least from my small usage of it

[@hubbada6373]

@@JackTim All right, thanks for the tip man, the puppet looks great btw

[@awesomecatgaming7060]

Cool! At Least I Know What My Next Nightmare Is!!

[@lolstopforget6752]

Looks awesome, Why don't you make a DIY balloon boy? I think it would look great

[@dj_hypno2460]

Nice. But what about the fingers?

[@gerardrejano]

the puppet was one of my favourite fnaf characters and I like this

[@venomfan2020]

You forgot the Marionnette's fingers

[@reedling123]

I felt ashamed when I realized I was not subscribed 😔 but now I am 😎👍

[@Karaticat]

mario hit the gym recently he buff

[@paytonsullivan3723]

you are way too underated this is peak content

[@MonkeyTrap_1]

i have that exact same techdeck skateboard thats on your desk

[@damianmolina2524]

you should put a layer of resin or clear polish to give it a glosy look

[@farisribbit1706]

Bro made a bdsm puppet, nah I'm just messin with ya, I opted to paint my mask by hand and make the mask using dry clay. I also bought some velvet fabric from the store to make the body and appendages. Also those weird things on the arms and legs are ribbons, you could've just bought a roll and cut some out and either sewed them or hot glued them

[@jappa3631]

Subbed before this channel blows up

[@evanonearth1060]

you should make life size lefty

[@Saberaxolotl]

Yes and make it so you can put the puppet inside of it

[@nathanhall-r5k]

I suggest you do a Lefty suit

[@Ooopy4723epikgamergod]

this is freakishly good are u henry?

[@moopshloop9369]

THIS IS SO COOL keep doing what ur doing

[@yummy_apple7924]

I have a good idea you should make a freddle that would be so cool

[@CharLovesVox]

Wow I want one so bad! You are so talented :0

[@BL0XYST1NG3R]

Great! Just one rule. *don’t forget to wind that music box.*

[@deadpool5843]

soooo cool that looks sooo hard

[@LegacyCyborgMike]

would be really cool if I could buy this

[@FUNGUSMAN920]

Maybe you should make the Freddles next, I think it would be cool.

[@emmamiller5157]

What program did you use to design the models? thankyou big fan of your work!

[@JackTim]

I use blender

[@Spacetrap]

Can im have a question? How many it cost to make a suit like springtrap one you did in last vids?

[@JackTim]

Around $300

[@Spacetrap]

@@JackTim ok thanks

[@mohamedrayan4088]

Hey is that 3D printed or did you bought it in a store bc I want to make the puppet so tell me pls

[@lilasmith3005]

dude how. this is amazing!!

[@xspiral-w6w]

cool! just remember, keep her music box wound up!

[@GoodGamesanim]

Looks great but the fingers on the puppet were forgotten

[@SamXlk]

What type of coloring material/paint did you use?

[@JackTim]

nothing special, just some generic acrylic paints

[@bronz3]

Yo, you should do the fredlings from fnaf 4

[@MC_BONNIE]

How do you only have 2k subs this content is amazing!

[@studioleetv5100]

Wow that is amazing. Way to go superstar!

[@JessJess347]

This is amazing! could you do Toy Chica id do it myself but I don't know how to get the model. Thanks for putting the mask up on thingiverse btw I have printed it and its nice.

[@JessJess347]

I plan on attempting to Print a full size toy chica standing at 6'4 but I'm not too sure how to do this obviously it would be great if you could do it but I understand that is too much to ask for any tips on how I can do this though? software general tips etc

[@clplayzxz10101]

Is this something you do on a daily basis

[@songsofhell]

It looks awesome! Your FNAF 3D prints are always beautiful and creative. I have an idea for you, I would love to see an Ennard mask 3D printed! Ennard has a very complicated wires all over his body which is why I think just the mask would look great! It would also be neat if it were able to open from the middle and lower jaws.

[@youareanidiot8980]

Looks good to make a Life size fnaf rp in your house

[@35Cyt]

Stuff the puppet into the springtrap suit

[@damer4life528]

Lefty but Springtrap???

[@Literally853]

yay new punching bag

[@dianarodriguez8675]

Hey hey guy you forgot to make the fingers for the puppet The puppet of three fingers you forgot about that

[@Some_kid73737]

Your always the goat with this

[@spikeup795]

Looks good

[@keishaannicapriego6234]

Tooooo that is ganna bring life

[@lunaanims8171]

do you 3d print pre-made models or do you model them yourself?

[@JackTim]

I make all of my models

[@dracodeez69420]

You can tell that he gets nightmates at night sometimes cuz of all his 3d printed animatronics

[@rippepot]

it's super cool but you forgot the hands!

[@JackTim]

I couldn’t find a way to make them look good

[@jigtenwangchuck6588]

I love your videos 😁

[@th3m4gIcM4n]

what 3D Printer do you use for these? I would love to try and make some of my own!

[@JackTim]

I use the CR-10

[@dukcaa]

@@JackTim hi

[@JackTim]

Hi

[@dukcaa]

@@JackTim have you seen my channel before by any chance?

[@thepuppet8329]

I Like it!✨

[@Pumpk1nguts]

THE HANDS DUDE THE HANDS

[@AlexanderDoesntDraw]

I wanna do this but I don't a 3D printer

[@cheeseballs6977]

WOAH THIS IS COOL

[@DylanBazinga]

What 3d printer do you use?

[@JackTim]

CR-10

[@EduardoDev877]

Cool video

[@shmunk825]

Yooo, that’s sick! I don’t know what to save up for, a life-size Freddy Fazbear foam statue, or a 3D printer..?

[@dragnphlazer48]

3d printer, I suggest the Longer LK5 Pro 3D Printer. It is cheap and large, and worth it.

[@shmunk825]

@@dragnphlazer48 I mean, i have enough. I’m completely new to 3D printing and doesn’t know shit about how this works, should i buy it?

[@Crinlask]

@Stinkyboi L Get the 3D printer still. Learn from KZbin tutorials and such. Then you can make a much bigger Freddy! :D

[@shmunk825]

@@Crinlask Alright, i will. Thank you!

[@dragnphlazer48]

@@shmunk825 yes

[@snakefurty5619]

!!nice video!!

[@fazeditor8103]

Can you make Funtime Freddy? Also you need more support because your art is Really good.

[@syweb2]

Cool build, but why doesn't it have fingers?

[@JackTim]

Couldn’t find a way for them to look good

[@jamesmoriarty8102]

I like how he has chica’s cupcake as a trashcan

[@ALXCHTZ]

So cool

[@pikkeneater]

*starts singing notion*

[@Bonnie_TheBunnygaming]

I need a music box ASAP

[@bruhmincraft2211]

Yes very good

[@main.YaD.sa.]

imagine you see that in the middle of the night

[@L70PRY]

How that’s inpossible how is it so good

[@The_Frog_Judge]

What is this fabric

[@huggywuggy6253]

It looks great but you forgot the hands

[@gamingfilms3700]

Looks good, but just wanted to tell you that you forgot the fingers

[@becool1580]

Man you blew up lol last time you were at 200 subs

[@the_smiler953]

The purple mask behind the slaughter D:

[@jamesmoriarty8102]

I actually like Merionethtte and it also looks realistic

[@the_heartbreakers]

Can you sort of make foxy?

[@leaf7927]

Pls tell me how i need to do it if i want to print it at 40%?

[@leaf7927]

P. S i love your channale

[@JackTim]

Everything should be the same, you’ll just have to use a thinner wire for the spine

[@leaf7927]

@@JackTim ty so mutch i did the bon and plush trap i made some tik toks and i mentioned you

[@Terroxgames6969]

I hope I can make a puppet mask

[@Cncinderella30]

Sorry um I'm not the one to complain but where are the fingers besides that its pretty good

[@GhazMazMSM]

Where are it's fingers?

[@JackTim]

Hidden

[@nexis1841]

Letsssss gooo only 3 months left and we will talk again

[@scpguy3xlul746]

If you put the eyes, cheeks a bit lower and make the eyes a bit bigger then it will look a bit more realistic

[@fireactivefoxy6835]

Where are the hands of the puppet

[@SomeDegeneratedKid]

you should make nightmare bb next

[@fortnite_gg305]

Hey maybe should 3-D print bonbon from FNAF sister location or maybe a mini Rena

[@the_purple_hat]

Please make another costume, I wanna see withered foxy or toy bonnie!

[@DapperDomDX]

awesome man, cool shit

[@ashleighreid2516]

Could you make a replica of Lionel the lion from circus playhouse next from the animatronic band

[@RetroSamson]

Could you possibly make a Robert Pattinson Batman mask. I have a Ender 3 so it’s not big so maybe a in a few pieces? God bless.

[@MikeyPocketMon]

oh HELL Nah, Imagine waking up with all these around you