Looking good and solid build. I did mine with 4x4s more expensive material
@villainmediaproductions52374 жыл бұрын
Thanks. I do watch your videos I’m looking to upgrade my filter but I’m waiting for this virus thing to settle down a bit more before I hit Lowe’s for a few things I need.
@KoiTimeUSA4 жыл бұрын
@@villainmediaproductions5237 I shared your videos to my koi group they enjoyed watching it.. 😜👍😁
@JackWarr3n5 ай бұрын
Not a single pilot hole 😂 just send it.
@markatkinson233 жыл бұрын
I have done the same but a bit smaller and alot of people said it would not hold the water ? Now I'm nervous of filling mine up now how is yours doing has it lasted? Regards mark
@villainmediaproductions52373 жыл бұрын
It’s been about a year I haven’t had any issues. I have about 8 to 900 gallons in it
@villainmediaproductions52373 жыл бұрын
I’m making changes again to the filter. I’m putting a video together now. Thanks for watching
@jesselove37157 ай бұрын
I am really curious how this held up over the years. The supports dont seem strong enough to prevent bowing over time. I would expect twice the vertical bracing at least with all the outward water pressure.
@brynleysmith35102 жыл бұрын
Not sure 4x2 will be strong enough tbh think it will bow
@villainmediaproductions523710 ай бұрын
It never bowed. 💪🏻
@bryanhouse68113 жыл бұрын
Excellent video, I was looking hi and low for this video. I love you framing plan. I will make minor adjustment. Put this is by far a great raised KOI pond plan. Thanks for sharing.
@villainmediaproductions52373 жыл бұрын
Thanks for watching
@desperadosanchez7234 жыл бұрын
Great video what size sheets of plywood thickness. did you use and how's its holding so far . Plz
@villainmediaproductions52374 жыл бұрын
Desperado Sanchez 3/4 in for the sides 1/2 for the bottom. No bowing. It’s holding up great. Thanks for watching
@MasterTy777 Жыл бұрын
what is the size of the liner? and 45 mil? or 60?
@benjaminhammond79252 жыл бұрын
can you plaster with cement for waterproofing instead of using the liner? And will it work?
@dannyrispin26393 жыл бұрын
Easy pal iv just built the same as you copied really how did it hold up im worried mine is guna blow out
@villainmediaproductions52373 жыл бұрын
Lol no problem. It’s rock solid. Thanks for watching
@brokegamer53164 жыл бұрын
the wood wont crack if u predrill
@villainmediaproductions52374 жыл бұрын
Very true that was the only one that did
@albertosansonjr.93174 жыл бұрын
@@villainmediaproductions5237 sir what are the sizes of the woods did u used?
@schnookieshullHull3 жыл бұрын
@@villainmediaproductions5237 the only one that cracked? or the only end you didn't pre drill lol 😂
@brian684674 жыл бұрын
Hello Sir, at 9:54 it indicates "I added extra supports not filmed". 1st question: What are the extra supports? 2nd question: your pond size is 5x8x3. Do you think 5x10x3 is still holding up? Thanks. You did a great job! Sir.
@villainmediaproductions52374 жыл бұрын
The extra support I added an extra 2x4 on the short ends. 5x10x3 will be fine with a few more 2x4 s.
@DavidJHarrisonEssex3 жыл бұрын
I want to do something like this, my research brought me here but I want windows in mine. Good video, thanks
@villainmediaproductions52373 жыл бұрын
Thanks for watching. I wanted a window also I just don’t have those skills lol
@vsaioutdoorx3 жыл бұрын
Does your koi pond bow out when filled with water? Mine bow out so now I have to put a pole in on the side to hold it in place.
@villainmediaproductions52373 жыл бұрын
Not at all. Thanks for watching
@acaciajamaal9973 жыл бұрын
whats the length of screw and name of type of screw
@villainmediaproductions52373 жыл бұрын
I used 2 1/2 in outdoor wood screws for the frame then 1 1/2 in to attach the 3/4 inch plywood. Thanks for watching
@ritesha80503 жыл бұрын
What is the distance between the supports
@villainmediaproductions52373 жыл бұрын
It’s around 2ft
@suetoach81573 жыл бұрын
what thickness ply wood did you use please?
@villainmediaproductions52373 жыл бұрын
3/4 inch plywood. Thanks for watching
@Adrian_213 жыл бұрын
Would this be good for any largemouth bass
@Larry-rr6ko3 жыл бұрын
Oh definitely
@brandonshea19553 жыл бұрын
What size pond liner did you use
@villainmediaproductions52373 жыл бұрын
I believe it was 18x12. I think the cut it a bit larger than that. I had to cut off a bunch.
@josephmartinez42753 жыл бұрын
How’s this holding up?
@villainmediaproductions52373 жыл бұрын
No issues at all. No bowing or leaks. Thanks for watching
@ritesha80503 жыл бұрын
What is the total cost excluding filter
@villainmediaproductions52373 жыл бұрын
It was around 800.00 us
@ritesha80503 жыл бұрын
@@villainmediaproductions5237 thx
@KL-hc7se4 жыл бұрын
im thinking of using this for my leopard geckos!
@villainmediaproductions52374 жыл бұрын
Sounds interesting
@Gobrian443 жыл бұрын
How’s this holding up?
@villainmediaproductions52373 жыл бұрын
It’s holding up fine. No issues at all. Thanks for watching
@Gobrian44 Жыл бұрын
@@villainmediaproductions5237 About to start a similar build. How’d you determine how strong to make it?
@ewayjeng13 жыл бұрын
How many gallons is this pond?
@villainmediaproductions52373 жыл бұрын
Between 8and 900 gallons
@villainmediaproductions52373 жыл бұрын
Depends on how much water I put in it
@ritesha80503 жыл бұрын
What size wood is it
@villainmediaproductions52373 жыл бұрын
I used 2x4 and I think 3 to 4 sheets of plywood. I used 1 and 1/2 sheets just for the floor cause it’s 5x8. The res was for the walls. Thanks for watching
@ritesha80503 жыл бұрын
@@villainmediaproductions5237 thx a lot man
@adeelshaikh21294 жыл бұрын
Looking very nice good luck with pond
@villainmediaproductions52374 жыл бұрын
Thanks. I also have a 120g cichlid tank
@adeelshaikh21294 жыл бұрын
i am just Subscribe you i hope you do some thanks #264
@mirola734 жыл бұрын
How is it holding up, no bowing or cracks ?
@villainmediaproductions52374 жыл бұрын
Not so far. I didn’t put the plants in yet.
@villainmediaproductions52374 жыл бұрын
No bowing on the plywood tank itself.
@kenthoang22023 жыл бұрын
your work is awesome sir! How do you cut the wood so straight? i cant even cut a simple piece :)
@villainmediaproductions52373 жыл бұрын
The plywood was cut at Home Depot. The 2x4icut with a saw. Thanks for watching
@diegoalvarado13514 жыл бұрын
How much did this cost ?
@villainmediaproductions52374 жыл бұрын
Roughly 800 dollars. The liner alone was around 280 dollars.
@Larry-rr6ko4 жыл бұрын
I'm doing this for my fancy goldfish. Thank you
@villainmediaproductions52374 жыл бұрын
Go for it!
@villainmediaproductions52373 жыл бұрын
For sure it’s definitely big enough
@Larry-rr6ko3 жыл бұрын
@@villainmediaproductions5237 it is!!!! I have it all together now I need a liner and I’m about done with it. I was shocked at how much wood went up. It’s so cool. Thank you for your video. How is yours doing? Still dandy?
@villainmediaproductions52373 жыл бұрын
And wood cost a lot more now than last year lol
@villainmediaproductions52373 жыл бұрын
Still going strong. Other than me changing up my filters
@albertosansonjr.93174 жыл бұрын
wat is the size of the plywood?
@villainmediaproductions52374 жыл бұрын
I used 2x4 and4x4
@villainmediaproductions52374 жыл бұрын
The plywood was 1/2 inch 4x8 sheets
@albertosansonjr.93174 жыл бұрын
@@villainmediaproductions5237 sir how many 2x4 and 4x4 woods did u used? And what is the height of ur koi pond did u make?
@villainmediaproductions52374 жыл бұрын
The pond is 5’ x 8’ and 36 inches high
@albertosansonjr.93174 жыл бұрын
@@villainmediaproductions5237 sir how many plywood did you used?