DIY RC Truck LED Police Light Flasher With Push Button Pattern Control | ATtiny85 Projects

[@HAZITECH]

Now you can buy plug and play "HAZI TECH TINY Pixel LED Controller". More details here 👉🏻 kzbin.info/aero/PL4dsTE_604gv_zHUUKsRXbz0E_pfTAr9S

[@jagdeepsharma1772]

Are you from Sri Lanka?

[@HAZITECH]

Yes I am

[@dishanindika7575]

Wow amazing 😍

[@HAZITECH]

Thanks ☺️

[@trist5254]

Just what I've been looking for cheers man, great vid 👍

[@HAZITECH]

Thanks a lot bro. Don’t forget to Subscribe, like and share.

[@ShanthiMallawarachchi]

ඔයාගේ අයියේ වැඩනම් සුපිරි ආයේ කියන්න දෙයක් නෑ 😊😊

[@HAZITECH]

ගොඩක් ස්තුතියි මල්ලී ☺️

[@ShanthiMallawarachchi]

අර මේ ච්ප් එකක් තියෙන ආඩිනෝ බෝඩ් එකකිනුත් ඔය විදියට හදන්න පුළුවන් නේද

[@ShanthiMallawarachchi]

පෝන් එකෙනුත් ඔය විදියට ප්‍රෝග්‍රෑම් කරන්න පුලුවන් නේද

[@matthiash.454]

that is yet again perfectly implemented 👍🏼 Keep it up 😁

[@HAZITECH]

Thanks Matze 😊

[@ShridharKodalkar]

How to make this police light without coding because I have not aurdino or any other module to code and also i have not pc or laptop 😞 please reply

[@HAZITECH]

Sorry, it’s almost impossible to do all these designs without using a microcontroller.

[@ShridharKodalkar]

@@HAZITECH fine but can I make first mode of the light shown in video without microcontroller and how ? Suggest me a video link of your channel or othe channel please 🙏🙏

[@mohamedmenacer6512]

thanks a lot ! the best one i never seen !

[@HAZITECH]

Thank you so much ☺️

[@kenbrooks2893]

Hello and let me start by saying thank you. I have searched all over trying to find a circuit like yours which would auto change the flash pattern. I know nothing about Arduino and have never tried it, until now. Thanks to you I have now purchased several Arduino boards as well as the ATtiny85 in hopes of making your build. Thank you so much for sharing your information it is exactly what I was looking for.

[@HAZITECH]

Wow awesome to hear that. If you need custom work done with LED stuff, let us know. We have plug and play controller boards and do custom coding as well. Contact us at [e-mail]

[@HAZITECH]

Would you be kind enough to do me a favor? I would really appreciate it if you could visit my Facebook page through the provided link, follow it and leave a review. To do so, simply click on the ⭐️ ’Star’ button. Thank you very much for your help! facebook.com/HAZI.TECH

[@peehukumar553]

Thank you bro ❤️

[@HAZITECH]

You are welcome

[@genevamotorshowcar]

Hi HAZITCH, You are doing really amazing job. We did Die-Cast Upgrade for Landcruiser LC200 & Audi A7 Police Strobe Lights using your Tutorial. Thanks a Lot & do new Die Cast light upgrades. I will definitely upgrade my die-casts

[@HAZITECH]

Wow awesome. I’m so glad that I helped you.

[@sangrajawalisakti2206]

Very Good And Great Project 👍👍👍

[@HAZITECH]

Thanks 😊

[@HAZITECH]

If you find this video enjoyable, I kindly encourage you to express your support by liking and subscribing. Your engagement not only fuels the growth of the channel but also serves as a tremendous motivation for me to create more captivating content. Thank you sincerely for your invaluable support!

[@rectifyer949]

Nice project.

[@HAZITECH]

Thank you!

[@kayequiambao8489]

Thank you for this. I really appreciate it. Please make another tutorial for ATtiny85 and IR sensors :)

[@HAZITECH]

Thanks. I will do so 👍🏻

[@kayequiambao8489]

@@HAZITECH thank you..

[@kayequiambao8489]

@@HAZITECH I have a question. can we also do this in a 4-pin LED? the RGB LED? thank you!

[@HAZITECH]

You are welcome

[@HAZITECH]

Sorry the data pins won’t be sufficient

[@sachinthanirmal8155]

Brother can you give me the copy of this adino programe, i don't know to write programe to this light

[@sachinthanirmal8155]

Please

[@HAZITECH]

It is linked in the video description bro

[@sachinthanirmal8155]

Can you reply that link again to this chat, I can't find the correct video properly?

[@sachinthanirmal8155]

What is the code brother, I can't find it

[@thusharagunarathna8728]

Niyamai aiye,thawa thawa aluth item hadanna puluwan wewa kiyala man parthana krawa 😘

[@HAZITECH]

Bohoma sthuthi malli

[@thusharagunarathna8728]

@@HAZITECH aiye aluth etim ekak lagadima ona,danakan balan enno

[@HAZITECH]

Ok malli dennam dennam

[@Md_Sohel_Rana]

Nice project

[@HAZITECH]

Thanks a lot

[@luisnarvaez3352]

Very good 👍👌

[@HAZITECH]

Thanks

[@AmjadAli-p9k2s]

Nice project

[@HAZITECH]

Thanks

[@chitrungpham5804]

It's so cool project, perfect

[@HAZITECH]

Thank you so much.

[@matthiash.454]

Question: could you program something like this with a "LED strip" instead of LEDs 🤔❓with different numbers of SMDs ❓?

[@HAZITECH]

Hey Matze, NO you cannot use LED strips. But you could use 1-3 LEDs per channel.

[@LongvuTV]

Very cool!

[@HAZITECH]

Thank you so much

[@wawanautolight1915]

what if the board used is Wemos d1 mini. Is writing a different sketch??

[@HAZITECH]

Sorry I haven't used it.

[@malindushami]

very nice😃😍😍😍😍😍

[@HAZITECH]

Thanks a lot 😊

[@Shanbirdacademy]

Nice project 👍❤️

[@HAZITECH]

Thanks a lot

[@FrostyFlankz]

You are awesome my friend!!

[@HAZITECH]

Thank you so much

[@lodwar]

Hello! Why do you use the eeprom to store the numb var first? Isnt it better without writing the eeprom to save lifetime? Thx or your answer.

[@HAZITECH]

It is to keep the selected pattern in the memory even after powering off the system.

[@supunsupun8651]

I have 4, 12 v led strob lights. Is there a way to use these patterns to them like in this video with 12v

[@HAZITECH]

No it does not work with this.

[@Ride-j5q]

Can you make it with 12v leds operating with 12v battery??? Please reply

[@HAZITECH]

Sorry not this one. It requires both hardware and software update.

[@just1lifexx11]

Micro controller.. I hate that stuff.. L but it's soo good when you have the computer to find.. nice job. Brother

[@HAZITECH]

Thanks a lot.

[@Muhammedff]

can the project be done with attiny13 do you want to change the code

[@HAZITECH]

Should be possible as this uses very little memory. You may need to change the pin numbers that’s it. Just compile the code for Attiny13 and see whether it works.

[@manukalias]

Very Nice Project 👌👌 What is the maximum voltage it can take, Can we power it up from 18650 battery, which is around 4.2v on full charge??

[@HAZITECH]

Hi. Thanks. Use a 0.5W ~200 Ohm resistor at the +3V in and connect the battery.

[@sanithuathauda773]

Hey bro can I use a attiny13a ic

[@HAZITECH]

I don't think so as it has a limited memory. You can try compiling the code for that.

[@Azmakiyeza]

please make something like this for the remote control version🙏🙏🙏

[@HAZITECH]

These designs and more are already in the remote control BOX version.

[@ayushsarkar4148]

Without code it work or not ? And how to make it without arduino

[@HAZITECH]

It won’t work without the code. And I only do Arduino projects. Sorry

[@muxlisarazzoqova9834]

Hello very hood

[@HAZITECH]

Thanks a lot

[@madurangageesara6299]

Dear, meke push button ek natuwa auto pattern tika maru wennna hdnna barida

[@HAZITECH]

Meke Pattern 9 kiyanne auto eka thama.

[@neoris7833]

i have make this same way. but led gnd all should join together light will glow up...if i follow led polarity in circuit does not work...

[@HAZITECH]

Please double check your wiring and code. It should work as it is.

[@hf2054]

How would I flash this sketch to an ESP32? Can it be done directly or do you have a sketch like this for an ESP32 please. Thanks in advance

[@HAZITECH]

Hi. You may need to change the pin numbers in the sketch for ESP32 based on your wiring. That’s it.

[@Themajh4il]

bhai police siren kese bnaye

[@HAZITECH]

In English please

[@madushikamaddushika-kj8kd]

code aeka ganna bene😢

[@HAZITECH]

PC eken google drive link ekata yanna.

[@gussphotowork3607]

can this be used at 5V voltage?

[@HAZITECH]

Yes of course. Please use a step down voltage converter to make the input voltage 3V.

[@HAZITECH]

Or you could use a 220 ohm 1/2 resistor at the input.

[@gussphotowork3607]

can I use 5pcs LED 5mm each in each I/O?

[@gussphotowork3607]

@@HAZITECH but just now I read the data sheet from the Atiny85 microchip that the operating voltage can be up to 5V

[@thunder_god501]

@@HAZITECH how to get output 12v, for 12v led

[@Muhammedff]

bro i have 24lc08, can i make it a police LED with mod, do you have attiny code?

[@HAZITECH]

Sorry I haven’t used it. Code is linked in the video description.

[@minilkasahashri]

kohomada swith 2 k pawichchi karala signal light hadanne attiny 85 pawichchi karala

[@HAZITECH]

Meka balanna DIY Universal Dynamic Turn Signal For Head lamp/ Fender/ Side mirror | ATtiny85 + WS2812B LED kzbin.info/www/bejne/fXuQZox4iZJomsU

[@mihiyabuslk1756]

Oya ic eka ඉලෙක්ට්‍රික් කඩවල ගන්න තියේද

[@HAZITECH]

Ow thiyanawa. Online Electronic Stores Sri Lanka store.zenix.lk/ tronic.lk digitalelectronics.lk www.menstore.lk duino.lkw scionelectronics.com senith.lk wire.lk techshop.lk robolabs.lk - Facebook Atom electronic- FaceBook page

[@Oleh-do9wr]

Thanks for the scheme and video! Please give hex file for ATtiny85

[@HAZITECH]

As usual the code is linked in the video description

[@alltypeshorts7713]

Sir mere pas to leptop nahi he mobaile se keyse kare please batado sir

[@HAZITECH]

Sorry I haven't tried with the mobile phone. Try using ArduinoDroid app.

[@dhongibaba642]

How much will this cost brother?

[@HAZITECH]

Send me an email to [e-mail] or WhatsApp [phone]

[@sachinthanirmal8155]

Kohomada meka 12V walata convert karanne?

[@sachinthanirmal8155]

Mata mekata maximum LED kiyak add karanna puluwan weida?

[@sachinthanirmal8155]

Nathnam me programe karapu antytiny85 ekama loku circuit ekakata use karanna puluwanda

[@HAZITECH]

Lesima wede Pixel LED walin wede karana eka.

[@astronic4522]

Nice brother ,already like and subcribe

[@HAZITECH]

Awesome. Thank you so much.

[@nalinchamindamanchanayke9753]

Boss good stuff cheers

[@HAZITECH]

Super thanks

[@fashadfaz9720]

12 volt current denta puluvag da

[@HAZITECH]

Direct 12V denna ba. Voltage regulator ekakin 3-4 V walata adu karala denna oona.

[@shadowv6794]

Man, this is so cool! But, isn't something like this illegal?

[@HAZITECH]

Thanks a lot. Since this is for RC vehicles, you should be good.

[@shaliyabro1990]

Supiri👌 .. madata sudu led 1 danna puluwn code eka liyana widiya kiyala denna puluwn da..

[@HAZITECH]

Sorry bro meke medata white ekak danna ba wena channel ekak widihata mokada ATtiny85 eke pin okkoma me wedeta use karala thiyenne.

[@shaliyabro1990]

Ok bro.. ♥️ mama haduwe , oya light okkoa diode dala diode wala anith patta sudu led walat dunna eka... eka wenama pattu unanm lassnai.. 👌

[@HAZITECH]

Surprisingly, 90% of video viewers haven't subscribed yet! If you enjoy my content, please consider subscribing and leaving a comment. Your engagement boosts the video's visibility. Thank you for your valuable support!

[@SiddhivinayakElectronicsLab]

❤

[@HAZITECH]

👍🏻

[@alltypeshorts7713]

Mobail phone se keyse ke please batado sir

[@HAZITECH]

Try using "ArduinoDroid" app

[@ගැජට්පොඩ්ඩා-ද6ඳ]

ne555 ic vip lights එකක් හදනවා දාන්න බැරිද

[@HAZITECH]

Time eka anuwa try ekak dannam. Thanks!.

[@gaminglk3484]

Meke ic eka lankave nadda

[@HAZITECH]

Thiyanawa. Poddak balanna tronic.lk digitalelectronics.lk www.menstore.lk duino.lk scionelectronics.com senith.lk wire.lk techshop.lk

[@ගැජට්පොඩ්ඩා-ද6ඳ]

Ic ne 555බැරිද

[@HAZITECH]

Ba me system ekata set wenne na.

[@minilkasahashri]

Kohomada program karapu atmel attiny85 ic eke program delete karanne

[@HAZITECH]

Wena code ekak ayama upload karaddi automa parana eka delete wenawa

[@minilkasahashri]

@@HAZITECH thanks

[@HAZITECH]

Please LIKE and SUBSCRIBE to grow the channel.

[@didieralbertoparedeszarago2154]

Excelent wwwwwoooooooo

[@HAZITECH]

Thank you so much. More in the ATtiny85 playlist. Check those out.

[@michaelrobert7624]

could you put this project to sell friend

[@HAZITECH]

I'm sorry. I don't sell.

[@tamanhquyen545]

Can you help me switch to attiny13?

[@HAZITECH]

Sorry low memory on ATtiny13

[@tamanhquyen545]

@@HAZITECH so on attiny45 it can be done. You can remove a few modes.

[@HAZITECH]

Yeah correct.

[@pasanbhashitha9842]

👍👍

[@HAZITECH]

👍🏻

[@nowangunarathna3023]

මේ Circuit එක 12 v වලින් වැඩ කරනවද broo

[@HAZITECH]

12V to 3V voltage regulator ekak danna

[@NIMA_BEATS]

Me pc eken karanne mokakda

[@HAZITECH]

IC eka program karana eka

[@NIMA_BEATS]

@@HAZITECH eka kare nethnam Ara light dising eka enne nedda

[@NIMA_BEATS]

@@HAZITECH please

[@HAZITECH]

@Nima_Beats Na. Program eken thama okkoma data denne.

[@gaffarff1740]

IC me code upload karke doge bhai

[@HAZITECH]

Go to ATtiny playlist to see how to upload the code

[@gaffarff1740]

Muje code upload bala ic cahiya

[@gaffarff1740]

Mera laptop nahiye

[@baala2739]

shall i use 9vt battery for this?

[@HAZITECH]

You have to step down it to 3V.

[@SAVERA_99]

Can you sell it to me.

[@HAZITECH]

Sure. please reach out to us via email at [e-mail] or on WhatsApp at [phone]

[@BIGplanetLife]

@HAZI TECH Can this work if powered by rechargeable 3.7v 2300mAh 8.6Wh battery? 👏🏼🥳Thank you much for all your videos!!!..Your effort is much appreciated. 👍🏼👍🏼I am subscriber now. 💯

[@HAZITECH]

Hi. Yes you can. Use a buck voltage converter to reduce the voltage to 3V. Thanks for subscribing me 😊

[@BIGplanetLife]

@@HAZITECH 👍🏼👍🏼Thank you!! Have a great weekend 🤓

[@HAZITECH]

You too 👍🏻

[@qadeer1685]

💯💯💯👍🏻👍🏻👍🏻👍🏻

[@HAZITECH]

Thanks 😊

[@random_idRI]

Can't control remote

[@HAZITECH]

No this is manual

[@Владимир-ж6х5ж]

Скажите пожалуйста а на digispark как можно сделать такую мигалку.

[@HAZITECH]

Тот же код будет работать на нем. Пожалуйста попробуйте.

[@Владимир-ж6х5ж]

Спасибо попробую

[@Владимир-ж6х5ж]

@@HAZITECH У меня не получается ,выдаёт вот такую ошибку #include

[@Владимир-ж6х5ж]

@@HAZITECH Arduino: 1.8.16 (Windows 7), Плата:"Digispark (Default - 16.5mhz)" RC_Police_Light_Push_Button:6:20: fatal error: EEPROM.h: No such file or directory #include ^ compilation terminated. exit status 1 EEPROM.h: No such file or directory вот такую ошибку выдаёт.

[@HAZITECH]

Add the EPROM.h library first to the Arduino software

[@kurtanthonyseverino4927]

do you have code??

[@HAZITECH]

Yes. It is linked in the video description as always.

[@kurtanthonyseverino4927]

@@HAZITECH thanks brother

[@HAZITECH]

You are welcome

[@vanderleisalgado5621]

gostei da pra fazer com ci555

[@HAZITECH]

Isso é mais fácil para mim. Você pode definitivamente tentar.

[@feruzjamalov5770]

Это продается? за сколько продашь?

[@HAZITECH]

жаль не продаю

[@всезнайка-ж6р]

GOOD MAN

[@HAZITECH]

Thanks a lot

[@mihipitayakku9462]

මේ circuit එක මෙහෙම හදලා ලොකු light වලට හයි කරන්න බැරිද ප්ලීස් reply

[@HAZITECH]

Ba sorry.

[@Md_Sohel_Rana]

Please upload video reguraly🙏🙏🙏

[@HAZITECH]

Will do. Thanks 👍🏻

[@DS_Production1]

Puluwn nm aiyage 4n no ekk dennko 🥺

[@HAZITECH]

HAZI TECH FB Page ekata msg ekak danna

[@dilshanrathnayake6897]

Bro not push button add timeer

[@HAZITECH]

Auto pattern change is there in the last pattern

[@ShanthiMallawarachchi]

ඔය රටා සේරම මරුවෙන් මාරුවට වැඩ කරන විදිහ ට හදන්න බෑයිද

[@HAZITECH]

Ooke anthima design eka ehema thama

[@a2zunlimit.118]

12v led වලට මේකම හදන්න බැය්ද

[@HAZITECH]

12V system ekak ikmanin dennam 👍🏻

[@milindasampath2078]

Cod eka balanna ba ne

[@HAZITECH]

Description eke link eka dala thiyanawa

[@manoharmanu1460]

very cool project buddy, thanks for sharing. I had a question, the max current for each IO pin on the attiny85 is stated as 40 ma which is sufficient for 2 led's , but you stated that if we need more led's per channel we can increase but wont the power per led get lower and thereby the brightness.

[@HAZITECH]

Hey thanks a lot. You can safely use up to 4 3mm LEDs per channel. It wouldn't draw much power as those are not continually on with maximum brightness.

[@HAZITECH]

If you find this video enjoyable, I kindly encourage you to express your support by liking and subscribing. Your engagement not only fuels the growth of the channel but also serves as a tremendous motivation for me to create more captivating content. Thank you sincerely for your invaluable support!

[@iu6qljomradio171]

Ciao hazi

[@HAZITECH]

Hi Tony😊

[@chathuraakalanka3605]

ප්‍රෝග්‍රෑම් කරල අයිසී එක කීයටද දෙන්නෙ බ්‍රදර් ♥️

[@HAZITECH]

IC eka witharak nam Rs.900 brother

[@nawanjanajayawardana5540]

ඔක ඩිරෙක් car බැටරියට දෙන්න බැරිද රිප්ලයි කරන්න අනිවා

[@HAZITECH]

Voltage regulator ekak dala voltage eka 3V wlata adu karala denna brother

[@nawanjanajayawardana5540]

ලයිට් ඔනි ගානක් දාල දෙන්න පුලුවන්නෙ නේද එතකොට කාර් එකකට

[@HAZITECH]

Meka thama car ekakata maru kzbin.info/www/bejne/oYG4ZGatZ5mmoas

[@nawanjanajayawardana5540]

@@HAZITECH එක් බලල එන්නම් brother 😍

[@alokachannel3226]

මේ ic එක ගන්න තැනක් නැද්ද

[@HAZITECH]

Online Electronic Stores Sri Lanka store.zenix.lk/ tronic.lk digitalelectronics.lk www.menstore.lk duino.lk scionelectronics.com senith.lk wire.lk techshop.lk robolabs.lk - Facebook Atom electronic- FaceBook page

[@feruzjamalov5770]

мне нужно только 12 вольт

[@HAZITECH]

Use a 12V to 3V buck converter

[@yohansasanka1079]

ඔයා ඕවා විකුන්නෙ නැද්ද

[@HAZITECH]

Sorry na.

[@Rafeeqkp914]

12 v

[@HAZITECH]

3V. For 12V, you need to use a voltage regulator .

[@Rafeeqkp914]

Ok bro

[@thunder_god501]

@@HAZITECH 🙏please do that video ,12v connection

[@thunder_god501]

@@HAZITECH how to get output 12v

[@ShanthiMallawarachchi]

මීට පස්සේ මොකක් හරි හදන එකක් ගැන video දාද්දී කතා කරන්නකෝ නැත්තම් තේරුම් ගන්න අමාරුයි

[@HAZITECH]

මම උත්සාහ කරන්නම්. ස්තුතියි ☺️

[@HAZITECH]

More ATtiny85 Projects and guides are here kzbin.info/aero/PL4dsTE_604gtS10OXtAWo1Wzn2JVjEjaF

[@kizaruchnl5947]

How can i oder this kit

[@HAZITECH]

Send an email to [e-mail]

[@t.muniyasam4463]

👎👎👎👎👎💡💡💡👎👎🎥