Replaced Battery/Cleaned smoke detector- Still BEEPING (Must RESET Detector)

[@DIYwithMichaelBorders]

If interested in purchasing this product, visit our Amazon affiliate link below. I earn from qualifying purchases. amzn.to/3SebLUL Keep us posted. 🧰

[@jennifergaver1239]

This video got me back to sleep. I was up between 1 am and 2:30 am with the low battery chirp and feeling incredibly helpless. You saved me! My "manual" said nothing about discharging the detector by holding the button down after the batteries were removed. It also did not explain the weird red latches (what should I call them?) that had to be held down to install the batteries, or what to do with the weird yellow tape (please!). I followed the directions with little hope that it would actually work, but to my amazement it did. I am a 65 year old woman living alone. You and the rest of the commenters here (I read all of them, they were super helpful) are my heroes! Long live KZbin.

[@mildredpierce4506]

I would just push the button and the chirping will stop for about 12 hours.

[@bjovel7238]

Dude I was forcing myself to sleep through the chirp. You saved me.

[@DIYwithMichaelBorders]

B Jovel Thanks for watching & hopefully you can get a good nights sleep from here. 😀 Let us know if you have any questions. Us fellow DIY’ers need to stick together! 😎👍🔧🔩

[@stavroskirtopoulos7166]

lol

[@JP-dz7zu]

I’m going on 3 years of beeps now.

[@DIYwithMichaelBorders]

@@JP-dz7zu 😳...that’s no fun

[@marcusmarcus3934]

Lol this was literally me and my girlfriend the last two nights. She was more bothered than I but you know they complain till it’s fixed 😂😂

[@gustavobanuelos1505]

5 years into the future and ur video is still helping people out thats crazy lol, first try did not work for some odd reason, it kind of pist me off so i did it again thankfully now it is noise free lol, thx so much!

[@DIYwithMichaelBorders]

That’s awesome, we appreciate you watching. 5 years strong and hoping for many more years of that video helping out our fellow DIYers and the DIY community. 😎👍

[@CBee-wq6kx]

I found these videos to be informative but I still couldn't get the beeping to stop even in a new device with new batteries. I drained the charge and restored the power but it still chirped. I finally decided to look at the other smoke alarms in the system. I found an old battery which I removed and replaced. I then did a re-cycle of the problem device and when I restored power and inserted the battery it was quiet. Its been quiet for 10 hours. I have concluded that the failing battery in the other unit was affecting the completely new smoke detector. I really hope this is helpful.

[@MyMsultan]

Wow! I must say... This video is 5 years old but it obviously never gets too old. I finally got the chirping to stop. It's been like 2-3 months that I have been living with this. Thank you so much!

[@DIYwithMichaelBorders]

Good morning, we appreciate you sharing this. We are drinking our morning coffee answering any and all questions for the DIY community. 2-3 months of chirping has come to an end. 😁👍 Let us know if we can help in any way. Hey also if you’re into crypto trading, join our newly launched DIY community ecosystem. Toolboxtoken.com We DIYers need to stick together! 🧰

[@Regi254.]

4 am and the alarm has been beeping for 2 hours. We have done everything even turned off the electricity. Still beeping. Now we are removing it as you said. Thank you.

[@DIYwithMichaelBorders]

Regi254 Good morning, we appreciate you reaching out to us. Thanks for watching. Keep us posted on the outcome. Us fellow DIY’ers need to stick together. Many more helpful videos to come! 😀 Please subscribe to the channel and Ring your KZbin Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@balbirsingh8622]

Great video, changing batteries and pressing the reset button did nothing. I am glad I watched your video. Finally the beeping stopped!!! Thanks a lot.

[@DIYwithMichaelBorders]

@@balbirsingh8622 Thanks for watching, we are honored to hear our video helped. 😁👍🧰

[@mmscheidt]

Thanks for posting this, Michael. I just reset the faulty alarm that was waking us between 1 and 2 AM regularly. I took the time to do the rest of the house's alarms as well. Hopefully we've heard the last of the chirping. While I had them down, I also blew some dust out of each one with compressed air, as I had read about elsewhere. Seemed like a good idea. Much appreciated!

[@DIYwithMichaelBorders]

mmscheidt Thanks for watching & sharing your comment. We are happy to hear the video helped. Great idea doing the rest of the Detectors. We really enjoy making these helpful videos for our fellow DIY’ers. 😀 Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@sriavula]

how's it been since then

[@mariekoehler7721]

After watching this and following your steps, I did it!! The chirping stopped and I can finally go to sleep peacefully!! Thank you so much for making this video!!

[@DIYwithMichaelBorders]

You are very welcome Marie, we definitely know that feeling of hearing a detector at night...no fun. Hopefully many stress free days ahead for you. 😎👍

[@marco12377]

Thanks, this video was very helpful. I thought I was going crazy for a second, I swapped out 3 different fresh batteries and the beeping wouldn't shut off. Unplugging it from AC, removing the battery and discharging it for 15 seconds did the trick!

[@DIYwithMichaelBorders]

Very cool, great job not giving up!! Thanks for watching, enjoy your day. 😎👍

[@snaspotter2990]

Thank you! Thank you! Thank you! After 3 new batteries, and an hour standing on the ladder, I was about to rip the whole freaking unit right off the ceiling!

[@DIYwithMichaelBorders]

Sna Spotter You are very welcome & we appreciate you watching. Sounds like you’re back up and running. 😀 Let us know if you have any questions. Us fellow DIY’ers need to stick together. 😎👍🔧🔩

[@TheDonzim]

Thanks for posting. This is the only posting that actually resolves the chirping issue . Not a long winded explanation of a bunch of nothing but right to the point! Thanks again

[@DIYwithMichaelBorders]

You are welcome, that’s great to hear. We appreciate you mentioning this, our goal continues to be getting you the info you need without wasting your valuable time. 😁👍 Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and help us grow an exclusive group of DIYers. toolboxtoken.com Reach out to us any time! 🧰

[@DELAWAREBOWHUNTER]

Dude - I was ready to spring 80 bucks for four new replacement. Smoke detectors! You save my life! You’ve got a good video, thank you very much.

[@DIYwithMichaelBorders]

Good morning, you are welcome! Thank YOU!!! You can put that $80.00 towards something else. Let us know if you have any questions and hey if you’re into crypto, join or DIY ecosystem. toolboxtoken.com Reach out to us any time! 🧰

[@christiejohnson5171]

Thank you so much for this video. Our dog was having serious anxiety with the chirping. Your directions were perfect. Thank you for doing a step-by-step

[@DIYwithMichaelBorders]

We appreciate that, hopefully many stress free days ahead for you and your dog. We definitely understand the annoyance that a chirping detector can cause.😁👍

[@FaithyandOtis..Massachusetts]

We had to defective smoke alarms, put in the same place when the maintenance guy took them out it was tripping on the ground without being connected, and without a battery being in at my dog almost had a heart attack. I had to take him outside. He was panting so bad.

[@user-fz1rf9ty2h]

So happy to have found you on you tube. All day the landlord tried to change the batteries in smoke detector following the 6 steps. It kept beeping. Finally went an bought a new smoke detector and it worked. He is now following your steps in changing the rest of smoke detector batteries following you instruction and we have success. Now suscribed to your channel

[@DIYwithMichaelBorders]

Good morning, hope you’re having a good start to your weekend. Just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community. We greatly appreciate you taking the time to leave a comment. That’s awesome you are getting all new detectors…a definite upgrade! 😁👍 Means the world to us that you subscribed, we subscribed back. Many more helpful videos to come, we promise! Let us know if you have any questions and hey if you’re interested, join our DIY ecosystem and help us grow an exclusive group of DIYers. toolboxtoken.com Reach out to us any time! 🧰

[@vladd1593]

I changed the battery and it beeped the next day! and the worst part is it only does it at night time. It finally stopped after the reset procedure! Thank you!

[@DIYwithMichaelBorders]

Vladimir Daguio Thanks for watching & we are here to help. Did the reset procedure work? Keep us posted. Us fellow DIY’ers need to stick together. Many more helpful videos to come! 😀 Please subscribe to the channel and Ring your KZbin Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@lourdespena7052]

Thank you so much for this video.. you just saved me from Smoke Detector Hell!! The ones that came with the house speak and would not shut up!

[@DIYwithMichaelBorders]

Lourdes Pena Awesome Awesome & thanks for checking out the video! We are happy to hear the video helped! Let us know if you have any additional questions along the way we are here to help! Please subscribe to the channel and turn on your KZbin notification Bell that would be awesome thanks again! Also below is a link to our Appliance/Home Repair Video PlayList. It has several videos you will definitely benefit from including many more on Smoke Detectors. Definitely check those out! Thanks again for taking the time to reach out to us! 😎👍🔧🔩 kzbin.info/aero/PLjCXOz8TSkZmG-ZbhhKPj4Vh3K3MDPXii

[@lovemisuraca285]

Ty

[@pastramimike]

Thank you for this! Super helpful, especially late at night when I'm too tired to think through these things on my own =)

[@DIYwithMichaelBorders]

Mike Palazzolo Awesome Awesome thanks for watching Mike! We are so glad the video helped! We appreciate you taking the time to reach out to us! Let us know if you have any additional questions along the way we are here to help! Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! Also below is a link to our Appliance/Home Repair Video PlayList. It contains several videos that you can benefit from including additional videos on your Smoke Detectors. Definitely check those out! 😎👍

[@brodericktolbert5392]

You're the MAN SIR!!!!! This was the remedy for the birds chirping in our house!!!!!!!

[@LieselInTheWoods]

I thought unplugging it and taking out the batteries was enough. I had no idea it could still be holding a charge that had to be drained! Thank you for saving my sanity!!!

[@DIYwithMichaelBorders]

You are very welcome, thanks for watching & sharing this. 👍

[@somonerandom9694]

Thank god I found this. Did it at 2AM on the highest smoke alarm in my house. Great vid.

[@DIYwithMichaelBorders]

Somone Random Very cool & you are very welcome! So happy to hear the video helped. Never fails...always happens between 1 & 4 am...so annoying 😆 Hopefully you were able get some sleep. Let us know if you have any questions, we are here to help. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@nonmihiseddeo4181]

I moved to an apartment that had one of these detectors when I moved in, and there's no manual. Thanks to this video, I was able accomplish all the steps to correctly drain the excess power, change the battery, and reset the device.

[@DIYwithMichaelBorders]

Nonmi Hiseddeo Awesome Awesome & that’s great news Nomni. 😀 Thanks for watching & sharing your experience. We are always here to answer questions. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again Nomni. 😎👍🔧🔩

[@Reina595]

Thanks so much! Your tip about discharging all of the fire alarms saved me. I replaced the batteries in each one and was still having alarms. But I tried your steps and *golden silence*

[@DIYwithMichaelBorders]

Thanks for watching Tamara, welcome to the DIY Raptor Club. That’s great news, golden silence sounds nice. Hopefully many stress free days ahead for you. 😎👍

[@marymagmartha7453]

My husband actually had no idea that the wires could be unplugged😉 We did what you suggested and _complete silence_ good sleep. No Dollar Tree batteries either! Thank you again.

[@DIYwithMichaelBorders]

MaryMag & Martha Awesome Awesome & Thanks for watching! And it never fails...always starts BEEPING like crazy at 2am! Definitely not cool 😆. We are glad the video helped! Let us know if you have any additional questions along the way we are here to help! Please subscribe to the channel and turn on your KZbin notification Bell that would be awesome thanks again! 😎👍🔧🔩 Also below is a link to our Appliance/Home Repair Video PlayList. It has lots of videos that you can benefit from...including many more helpful videos on Smoke Detectors. Definitely check those out! kzbin.info/aero/PLjCXOz8TSkZmG-ZbhhKPj4Vh3K3MDPXii

[@NVHSChadSheppard1]

I sent my roommates this video, it really helped out a lot because ours started going off and there was no smoke

[@DIYwithMichaelBorders]

NVHSChadSheppard1 Awesome Awesome & Thanks for checking out the video! We are glad the video helped! Let us know if you have any additional questions along the way we are here to help! 😎👍🔧🔩. Please subscribe to the channel and turn on your KZbin notification Bell that would be awesome thanks again!

[@twilightwolfqueen409]

Thank you for this video. I had found the manual for this type of smoke alarm, but was still confused as to how I needed to replace the battery. This helped a lot!

[@DIYwithMichaelBorders]

Good morning & you are very welcome, we appreciate you watching. We see you’re a DOGE fan. 😎👍

[@thenebraskan7661]

Thanks so much for the great video of silencing the smoke detector. I have three of them in various locations. Following your instructions I heard the charge dissipating in two of them. From now on I'll follow your tip when I change batteries. Thanks Again.

[@DIYwithMichaelBorders]

David Mardjanov Awesome & thanks for watching David. Hopefully your detector didn’t drive you crazy to much. Let us know if you have any questions! Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@spicyredlipstick4754]

Thank you! This video solved what could've been a nightmare for us!

[@DIYwithMichaelBorders]

Dee Robi Thanks for watching & we are happy to hear the video helped. Smoke Detector nightmares are no fun. 😀 As we have shared with my others, we really enjoy making these helpful videos for our fellow DIY’ers. 😀 Many more helpful videos to come! Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@SGMGTimHughes]

Thank you soooo much man!! I was 2 seconds away from just throwing the whole house away!!!! 😩😅🤜🏽🤛🏻

[@BethS19995]

April 2021 at 1a.m. alarm blasts to life. Placed new battery and it still beeps! Your video lesson saved it from my baseball bat.

[@eangrysmith]

Your video was excellent and educational. I finally get it. This after watching many videos. Thanks Michael!

[@DIYwithMichaelBorders]

Evelyn Angry-Smith Thanks for watching & we are happy the video helped Evelyn. We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come! 😁 Let us know if you have any questions. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@goldblueberries326]

Thank you for showing how to reset the smoke detectors and drain the electrical current out of each one

[@DIYwithMichaelBorders]

gold blueberries Thanks for watching & you are very welcome. We love your KZbin channel name! 😀 We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come! 😀 Let us know if you have any questions. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@shortishperson]

I have watched 5 videos on this topic and your video has been the most helpful of the lot. Thank god for you, friggen god send! Thank you.

[@DIYwithMichaelBorders]

shortishperson You are very welcome. 😁 Thanks for watching. We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come! 😀 Let us know if you have any questions. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@sherisellers1835]

Great video! This worked for me. Nuisance alarm with voice over and chirp...the voice woke me up out of my sleep...needless to say, your video resolved the issue!

[@DIYwithMichaelBorders]

So happy to help & we appreciate you reaching out to us Sheri. Let us know if you have any questions. Us DIY’ers need to stick together! 😎👍🔧🔩

[@Kinson09]

Thank you from 2:47 AM in TX; darn thing nearly woke up the whole house!

[@DIYwithMichaelBorders]

Good morning ☕️ Thanks for sharing this. Great to hear it didn’t wake up the entire house. Awesome job being the one to tackle this DIY project. 😁👍

[@yanic850]

OMGGGGG YOU HAVE SAVED MY HOUSEHOLD FROM THIS EXTRA BEEPING! 😫😫 I'm going to take the new battery out and drain the power like you stated! Thank you sooooo much!

[@DIYwithMichaelBorders]

Good morning Yani, welcome to the DIY Raptor Club. We appreciate you sharing this & we are here to help. Keep us posted on how your detector works after battery replacement & drain procedure. Hope all is well. 😎👍🔧🔩

[@angelicajade5953]

You, sir, are my hero!!! Mine was still chirping every 30 seconds or so after putting a new 9V battery in. Twisted the alarm counter-clockwise, and come to find out, it's not even hardwired! The wires are just stuffed into the ceiling. No wonder the batteries keep draining so quickly. Drained it for 15 seconds but I'm leaving the detector off the ceiling and I'm going to see if someone can hardwire it correctly for me before remounting it. Thanks again!!!!

[@DIYwithMichaelBorders]

Angelica Jade M. Awesome Awesome & thanks for sharing your experience & taking the time to reach out to us! We are so glad to hear the video helped. Please let us know if you have any additional questions along the way, we are here to help! Don’t forget to subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! Also, if it helps, below is a link to our Appliance/Home Repair Video PlayList. It contains several videos that you can benefit from including additional videos on your Smoke Detectors...definitely check it out! 😎👍🔧🔩 kzbin.info/aero/PLjCXOz8TSkZmG-ZbhhKPj4Vh3K3MDPXii

[@wendellalba7410]

17 JAN 2021...Guam, USA...crazy started at around 2 AM...4:29 pm NOW...A BIG THANK YOU!!!

[@DIYwithMichaelBorders]

Good morning Wendell & thanks for sharing this. Welcome to the DIY Raptor Club. Hopefully everything is back up and running properly. Let us know if you have any questions, enjoy your day. 😎👍🔧🔩

[@anniebee6215]

Thank you so much for making this video! The beeping noise was terribly annoying. All I had to do was some vacuuming and that solved the problem.

[@DIYwithMichaelBorders]

annie bee Thanks for watching & that’s awesome it was a simple fix. You may want to spend a few minutes once a month & vacuum your detector’s. 😀 Let us know if you have any questions. Please subscribe to the channel and Ring your KZbin Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@patriot0971]

I was about to replace the detector, thinking it had gone bad. Just followed your instructions and saved myself $20 and a trip to the hardware store.

[@DIYwithMichaelBorders]

That’s great news & thanks for watching. Saving time & money is our favorite. Enjoy your day. 😎👍🔧🔩

[@idsworkschedule4119]

I did not understand why they still beeped when i changed the batteries. Did not know I had to reset them. You just saved me some money. thanks

[@DIYwithMichaelBorders]

IDS WorkSchedule Thanks for watching. We are happy to hear you saved money. Let us know if you have any questions, us fellow DIY’ers need to stick together. 😀 Please subscribe to the channel and Ring your KZbin Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@koeibgm]

I didn't know that you need to plug the alarm off from the ceiling completely to change the batteries. Finally got rid of that "low battery" beeping hell. Thank you!

[@DIYwithMichaelBorders]

Thanks for watching & we appreciate you sharing your comment. That’s awesome the beeping is gone. 😁👍

[@9laral9]

Thanks Michael, this is just what I needed to know. I climbed a shaky 16 foot ladder to change the battery on a wired smoke detector, and as soon as I got down, it started beeping again. I never had to reset it before inserting a new battery but I replaced the battery again with a new one and did the reset this time and it is now not beeping any more. I tested both batteries with a cheap Radio Shack analog tester and both were in the GOOD zone. But I measured the voltage of both, as you suggest in the video, and I found the first battery to be at only 7.6V. The second one was at 9.33V, so I don't know if the problem was the lower voltage of the first battery, alone, or the fact that I did not reset the unit, or both. Probably the low voltage alone, but it is better to do the simple reset anyway, just in case.

[@DIYwithMichaelBorders]

9laral9 Awesome Awesome & thanks for checking out the video and sharing your experience! We appreciate you reaching out to us! Smoke Detectors have come a long way over the years in terms of technological advances! Current code today is for them to all be hard wired on same circuit as you know! Adds tremendous safety awareness! Let us know if you have any additional questions along the way! We have several other videos that go more in depth with Smoke Detectors as well as many other household repairs that are cost friendly & can be a great DIY project. Below is a link to our Appliances/Home Repair PlayList. Definitely check it out! Please subscribe to the channel and turn on your KZbin notifications that would be awesome thanks again 😎👍 Appliance/Home Repair PlayList Link: kzbin.info/aero/PLjCXOz8TSkZmG-ZbhhKPj4Vh3K3MDPXii

[@9laral9]

You mean same electrical circuit right? Mine are not attached to a security system. There is only one LABELLED circuit for smoke detectors in the panel.

[@DIYwithMichaelBorders]

9laral9 Great question! Yes, same electrical circuit. Below is a video that I made that talks specifically about the hard wiring on same circuit. I love this new coded inspection...it definitely increases safety! You might find the video helpful. 😎👍 kzbin.info/www/bejne/oWitfnt4hdJln9E

[@yeswing10]

I have a knee injury, during the night, it started chirping. Bad timing. A definite test of patience and bridling of the tongue!!!! Thank you for your video.

[@DIYwithMichaelBorders]

You are very welcome, hopefully many stress free nights ahead for you. We appreciate you sharing this, safe & fast healing for your knee. Welcome to the DIY Raptor Club. 😎👍🔧🔩

[@yeswing10]

@@DIYwithMichaelBorders Thank you. I needed a knowledgeable man to show me what to do. Thank you so much!!!

[@DIYwithMichaelBorders]

@@yeswing10 So happy to help, we are always here to help answer questions. 😎👍🔧🔩

[@Hello-sd2jm]

Thank you so very much, didn't know why after replacing the battery it was still beeping.

[@pianomanSVT]

Was able to shut off the breaker and hit the test button and it stopped...at 2 in the morning of course! Thanks for the video!

[@DIYwithMichaelBorders]

pianomanSVT Thanks for watching & let us know if you have any questions. Us fellow DIY’ers need to stick together! 😎👍🔧🔩

[@TheeSocialButterflii]

Thank you! It’s 6am and I finally got it taken care thanks to you

[@DIYwithMichaelBorders]

TheeSocialButterflii Good morning & thanks for watching. You are very welcome. 6am is better than 2am...😆 Us fellow DIY’ers need to stick together, many more helpful videos to come! 😀 Please subscribe to the channel and Ring your KZbin Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@bettyclarke4819]

This video helped us after hours of trying to stop the chirping!!! Thank you! 4/30/2021

[@DIYwithMichaelBorders]

Awesome Awesome & that’s great to hear. So happy to help. Us fellow DIY’ers need to stick together! We appreciate you sharing this. Hope all is well, enjoy your day Betty. 😎👍🔧🔩

[@ayo30s]

Thanks a lot Brother, I was about to scrap and replace cos it wouldn’t stop screaming even after the battery was replaced, 👍🏾👊🏾✌🏾🇳🇬🇺🇸

[@DIYwithMichaelBorders]

ayo30s Thanks for watching & we are happy the video helped. 😀 We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come. 😀 Let us know if you have any questions. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@AnaM-qx1vy]

Omg thank you for this video! The chirping!!! Arghhh 🤦🏻‍♀️ If we didn’t have this video, the alarm probably would still be chirping 😂

[@DIYwithMichaelBorders]

Sea Bee Thanks for watching Sea Bee! We are happy to hear the video helped! We definitely understand the annoyance when these little Detectors go off for the wrong reasons! If you run into any questions along the way, definitely reach out to us, we are here to help! Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@tedwilliams9213]

Good, simple video. I never knew about draining the residual power left in the detector. Thanks, looking forward to watching your other videos.

[@DIYwithMichaelBorders]

Thanks for watching, we appreciate that. Awesome job making a DIY project. Looking forward to 2024, many more helpful videos to come. 👍🧰

[@Lydelll]

Clear, concise and to the point. Thank you!!!

[@DIYwithMichaelBorders]

We are honored to read this, thank you. Let us know if we can help answer any questions. 👍🧰

[@rachellegoodwin4868]

Thank You. Getting dressed heading to the store to buy a reliable battery. With COVID-19 I don't need to bother the Maintenance Man. I got this ...KZbin really saves lives.

[@DIYwithMichaelBorders]

Rachelle Goodwin Very cool & keep us posted on your project. Us fellow DIY’ers need to stick together! 😎👍🔧🔩

[@paullymorrissette489]

Thank you for showing me how 😊..I couldn't figure out why it kept chirping when I changed the batteries....🥴 I didn't know you had to reset/test it before I had put it back on

[@DIYwithMichaelBorders]

Hi Paully, so happy to help. By the sounds of it, you accomplished your DIY project and we appreciate you sharing this.

[@aticramsnika3524]

LIFE SAVER!! You very much appreciated sir!

[@itssinc10]

Awesome video short and to the point. It worked and helped us sleep better through the nights

[@DIYwithMichaelBorders]

ITSS Inc Thanks for watching & sharing your comment. We are happy to hear the video helped. We really enjoy making these helpful videos for our fellow DIY’ers. 😀 Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@TaiwanFirst]

Great video! Was able to reset mine and made it work again.

[@DIYwithMichaelBorders]

Jason Tai Awesome Awesome & thanks for sharing your experience! We are happy to hear the video helped! Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! Also below is a link to our Appliance/Home Repair Video PlayList. It contains several videos that you can benefit from including additional videos on your Smoke Detector. Definitely check those out! 😎👍🔧🔩 kzbin.info/aero/PLjCXOz8TSkZmG-ZbhhKPj4Vh3K3MDPXii

[@xciceroguy]

I have the exact same model. Never knew they come off the mount like that.Thanks.

[@DIYwithMichaelBorders]

Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community. They do indeed and we appreciate you coming across our video and sharing a comment. 😎👍 Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and become part of an exclusive group of DIYers. toolboxtoken.com Reach out to us any time! 🧰

[@lindacusumano]

thanks so much, people helping people, crazy annoying chirp is gone!

[@DIYwithMichaelBorders]

Linda Cusumano Thanks for watching & we are happy the video helped. We really enjoy making these helpful videos for our fellow DIY’ers. Many more DIY videos to come! 😀 Let us know if you have any questions. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@UncleJSlots]

Thanks for posting this...i had a bit newer model, but the steps were the same and it worked!!

[@DIYwithMichaelBorders]

Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community. You are welcome and thank YOU. We are happy to hear our video helped, even with your detector being a newer model. 😎👍 Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and become part of an exclusive group of DIYers. toolboxtoken.com Reach out to us any time! 🧰

[@theophilusgriffin8801]

Thanks for sharing. After changing my batteries 5xs, your video solved the problem.

[@DIYwithMichaelBorders]

Neat, thanks for watching & sharing this. That’s awesome you made it a DIY project. 😎👍

[@jonvine6800]

Thanks for your clear demo. It's exactly our unit. Followed exactly your instructions, including hearing the residual electric charge after the battery had been taken off. The chirping stopped after installing ne battery. However, the unit flashes red light after every 30 second interval. I followed exactly how you did it. Any response is appreciated.

[@DIYwithMichaelBorders]

Jon Vine Thanks for watching & we are happy the video helped. So glad to help. Depending on what year your Detector was manufactured will depend on the Red light. Your Red light will flash every 20-30 seconds & that’s normal. We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come! 😃 Let us know if you have any questions. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@jonvine6800]

@@DIYwithMichaelBorders Thanks for the quick response. I have observed the other detector units elsewhere in the house and you are correct-- they do blink red at 20++~30 sec interval and maintain green in between. Thanks again!

[@DIYwithMichaelBorders]

Jon Vine Very cool. 😎👍🔧🔩

[@revup67]

The Reset after disconnect is a great idea. In our case we installed a brand new 9 Volt battery. The chirping began several hours later. I yanked the new battery out and ran a battery test which started at 6 volts and quickly dropped to 0 volts in seconds. A brand new Duracell battery was the issue. Bad quality control by Duracell perhaps.

[@DIYwithMichaelBorders]

revup67 Thanks for sharing your experience. Are you back up & running normally? We hope this helps. Us fellow DIY’ers need to stick together. Many more helpful videos to come! Please subscribe to the channel and Ring your KZbin Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@revup67]

Yes indeed.

[@DIYwithMichaelBorders]

revup67 😎👍🔧🔩

[@trinitygamez5725]

Thank you and eternally grateful for your knowledge 😊 😃🥳

[@tubervine1259]

Unplugging is essential, yes. But also recommended to turn off power to detectors at breaker box. Thanks. Nice video.

[@DIYwithMichaelBorders]

Thanks for watching & sharing this. Any & all helpful info is greatly appreciated. 😎👍🔧🔩

[@dimeolas777]

Was trying to change my dads and he was telling me the wrong way. he went to watch the ballgame and I found this, all done, thanks.

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. Great to hear the video helped. Let us know if you have any questions. 😎👍🔧🔩

[@StephanieDaniels-tm5cm]

Thank you sir, saved my life I’m 64 had no clue thank you so much

[@DIYwithMichaelBorders]

Good morning Stephanie ☕️ you are welcome. You can reach out to us any time, thanks for watching. 🧰

[@tamivanderkamp1966]

Thank you for this well explained video! There’s nothing worse than a heart-stopping alarm at 3:30am, getting a ladder to change the battery, AND IT GOES OFF AGAIN!! Ours are interconnected, so the whole house was going off over a 2 hour period... UNTIL I finally pinpointed the breaker, which finally shut them off!!! My gosh! QUESTION: Should I leave breaker off while I’m uninstalling/replacing/reinstalling all alarms? Thank you!!!!

[@DIYwithMichaelBorders]

Tami VanDerKamp Thanks for watching Tami. Getting woken up at 3:30am is no fun. Hopefully you can get your system back up & running properly. You can definitely leave breaker off while you service detectors. Keep us posted on your project. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again. 😎👍🔧🔩

[@tamivanderkamp1966]

DIY With Michael Borders thank you for answering my question regarding breaker! My husband works out of town a lot and it seems things like this ALWAYS happen during those times. Your video will be most helpful when I get around to taking care of this matter, as I’m really in no big hurry since our home has 2 smoke detectors wired to our alarm system. Have a great day, and yes, I’ve subscribed to your channel with notifications!

[@DIYwithMichaelBorders]

Tami VanDerKamp Very cool & thanks for the reply. We appreciate you subscribing, we subscribed back! 😎👍🔧🔩

[@RSpuhl]

You're a life saver buddy!!! Thanks!!!

[@DIYwithMichaelBorders]

Outrider Thanks for watching. That’s why we love KZbin. Us fellow DIY’ers need to stick together. Let us know if you have any questions. Many more helpful videos to come! 😀 Please subscribe to the channel and Ring your KZbin Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@sunglassesjohn]

Great advice. Keep it up. Thank you.

[@DIYwithMichaelBorders]

sunglassesjohn Thanks for checking out the video and sharing your comment sunglassesjohn! We appreciate you taking the time to leave your comment! Below is a link to our “Appliances/Home Repair” videos PlayList...definitely check that out. There are many videos that you can benefit from! Let us know if you have any additional questions along the way! Please subscribe to the channel and turn on your KZbin notifications that would be awesome thanks again! 😎👍

[@andreagriego3343]

You saved this single mom's sanity. THANK YOU!

[@DIYwithMichaelBorders]

You are very welcome Andrea, so happy to help. We are always here to help answer questions. Please feel free to contact us anytime, thanks for watching. Enjoy your weekend. 😎👍

[@nikmor3]

Well, it's now 2020 and this video still saved us some sleep! Thanks for posting this.

[@DIYwithMichaelBorders]

nikmor3 Awesome Awesome & that’s great to hear. Thanks for watching & we hope you enjoyed the video. Many more helpful videos to come. 😀 Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again. 😎👍🔧🔩

[@wilbo1316]

Mines still going off lol

[@kylezeng8009]

Thank you so much. It tortured me for a whole night.

[@DIYwithMichaelBorders]

Kyle Zeng Thanks for watching, glad it helped. Torture is no good. Please subscribe to the channel and ring your KZbin bell 🔔 this will be very helpful to us thanks again! 😎👍🔧🔩

[@natalieframpton3217]

Thank you for the info on the electrical portion of unplugging the smoke detector from the ceiling in order to drain the battery of any stored power which will cause it to do a reset. I help my mother take care of her home and I was confused, earlier today, after I replaced the battery in the smoke detector, it began to chirp again. I did a little research and came across ur video. This must be why that is happeneing... It is too late to for me to try this out but I plan to try this procedure tomorrow morning. I hope this is the solution?!? 🙂 I'll report back...🤔🤞

[@DIYwithMichaelBorders]

Good morning, you are an awesome person helping your mother!!! 😎👍 Looking forward to hearing back from you today. 👍

[@Johnnathun]

Why is it these smoke detectors always seem to DIE at midnight! Your video was spoton, hoping you have a long list of how-to-videos just as helpful.

[@tarajones-legros3661]

OMG. Thank you so much!! This video should win best most helpful video on KZbin globally, every. Single. Year. I wonder how many marriages this video has saved?

[@DIYwithMichaelBorders]

Thanks for watching & we appreciate you sharing this. We love reading comments like yours. Saving marriages is a good thing. 😁 Hopefully many stress free days ahead for you.

[@mushkarothman6837]

Thank you so much. Extremely helpful.

[@DIYwithMichaelBorders]

Mushka Rothman Awesome Awesome & thanks for watching! We appreciate you taking the time to reach out to us! We are happy to hear the video helped. Let us know if you have any questions, we are here to help! Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@Ominicka]

Thanks a million that worked!

[@DIYwithMichaelBorders]

Ominicka Awesome Awesome & thanks for checking out the video! We are happy to hear the video helped! Let us know if you have any additional questions along the way we are here to help! Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! Also below is a link to our Appliance/Home Repair Video PlayList. It has several videos you will definitely benefit from including many more on Smoke Detectors. Definitely check those out! Thanks again for taking the time to reach out to us! 😎👍🔧🔩 kzbin.info/aero/PLjCXOz8TSkZmG-ZbhhKPj4Vh3K3MDPXii

[@hensleyke10]

For my honeywell smoke alarm (same in your video) - I had to plug back in and THEN press the reset button.

[@DIYwithMichaelBorders]

Thanks for sharing this, is it back to working as it should? Keep us posted.

[@jhonnaturner3262]

great video. perfectly helped my situation.

[@DIYwithMichaelBorders]

Jhonna Turner Very cool Thanks for checking out the video and sharing your comment Jhonna Turner! Glad to hear the video helped. Let us know if you have any additional questions! Please subscribe to the channel and turn on your KZbin notifications that would be awesome thanks again 😎👍

[@freezymkiv8890]

For those wondering why the tray doesn't close, you have to push the battery as you close it.

[@DIYwithMichaelBorders]

@@freezymkiv8890 Thanks for watching and sharing.

[@adam_3756]

Thank you so much! My some detector has been driving me nuts all night and even after trying 3 sets of batteries I couldn't get it to stop. I was ready to get the sledge hammer and just smash the stupid thing the relief I feel is almost overwhelming.

[@DIYwithMichaelBorders]

Thanks for watching & sharing this, we have all been there. 😁 So happy to help, hopefully many stress free nights ahead for you. 😎👍

[@tolulawrenceakinshete1979]

Thanks a million. This was so helpful for me just now. I was going crazy!

[@DIYwithMichaelBorders]

Hey what’s up, you are very welcome. Special thanks to you for taking the time out of your Wednesday afternoon to share this comment, it means the world to us.. 👍

[@hordetrooper]

thanks for the detailed video. i have this same exact detector and just started to beep every 1 min this morning. i will change it tonight.

[@DIYwithMichaelBorders]

hordetrooper Thanks for checking out the video and sharing your experience. We appreciate you taking the time to leave a comment. Glad the video helped. Do me a favor & keep us posted on your progress. Below are a few links that may help you learn more about the detectors. Please subscribe to the channel and turn on your KZbin notifications that would be awesome thanks again 😎👍 How to Properly & Safely Remove kzbin.info/www/bejne/b4bGZquFYrhlqNk Cleaning kzbin.info/www/bejne/jXyvioqKd7OZlas Cleaning with Air Can kzbin.info/www/bejne/nGfVnYlvjZiLrtE Smoke Detector Chirping kzbin.info/www/bejne/opiTemeQiNKEnrc Reasons why Smoke Detectors Beep kzbin.info/www/bejne/pIO2fpqVmbt7b80 Hard Wire Code Rule for Smoke Detectors kzbin.info/www/bejne/oWitfnt4hdJln9E

[@hordetrooper]

hi there, i replaced the battery and all is good now. thank you for your help. much appreciated.

[@DIYwithMichaelBorders]

hordetrooper Awesome Awesome & thanks for taking the time to update us! Glad to hear your Detectors are good to go. Let us know if you have any additional questions along the way. 😎👍

[@benjzubieto3757]

Giving you my subcription means I am satisfied on your video. I follow your instruction then bang on got the chirping out and she is sulent now Thank you bro.

[@DIYwithMichaelBorders]

Good morning ☕️ That means the world to us, no joke. Our goal continues to be getting you the info you need without wasting your valuable time. We subscribed to you as well. You can reach out to us any time. Many more helpful videos to come. 😁👍☕️

[@rafico9352]

Smoke detector will always let you know that a new battery is required at 2 IN THE FREAKING MORNING! Thanks for sharing your knowledge!!

[@DIYwithMichaelBorders]

Thanks for watching & we couldn’t agree with you more...🤣 So NOT cool...🤣 Let us know if you have any questions. Welcome to the DIY Raptor Club.

[@EdwardFinance]

This video has helped me so much. Thank you!

[@DIYwithMichaelBorders]

Good afternoon, we are happy to hear this. Thanks for taking the time to reach out to us and share this. Hope all is well. Enjoy your upcoming week. 😎👍

[@mattbrown817]

I am already happy to see this thank you

[@mintyz3326]

Thank you for taking the time to make this video, you have no idea.

[@DIYwithMichaelBorders]

Good morning, just poured a ☕️ and am sitting down to answer any and all questions for the DIY community. We are honored you took the time to reach out to us. Let us know if you have any questions and hey if you’re interested, join our DIY ecosystem and help us grow an exclusive group of DIYers. toolboxtoken.com Reach out to us any time! 🧰

[@barbaramajoy5278]

Thank you. We were at a loss and will purchase new duracell batteries, drain the decetor and hope it works.

[@DIYwithMichaelBorders]

Barbara Majoy Thanks for watching & we appreciate you reaching out to us Barbara. Keep us posted! We really enjoy making these helpful videos for our fellow DIY’ers. 😀 Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@pamthemom]

Thank you sir. I'll go give this a try.

[@DIYwithMichaelBorders]

Pamela Walton Very cool & thanks for watching Pamela! We hope the video helped! We are here to help so please let us know if you have any questions during your project! Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@UNKNWN96]

God bless your soul for this video, I always thought changing the batteries wouldn't matter but I never followed the full process. You just allowed me to get much better rest at night :D

[@DIYwithMichaelBorders]

Immanuel Monroe Thanks for watching & we are very happy to read your comment. More sleep is always a good thing! 😀 Let us know if you have any questions. We really enjoy making these helpful videos for our fellow DIY’ers. 😀 Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@jsprankel4712]

Really good video. Thank you! All that chirp means is that the battery needs replaced. If everyone would remember to test their alarms monthly, replace the batteries annually, and replace the entire unit every 10 years much of their problems would be avoided. I just replaced mine a month ago and the original alarms were 16 years old. I am the Fire Education Specialist for our county!

[@DIYwithMichaelBorders]

J Sprankel Thanks for watching & that’s great advice. We couldn’t agree with you more. Us fellow DIY’ers need to stick together. Please subscribe to the channel and ring your KZbin bell 🔔 that would be awesome thanks again! 😎👍🔧🔩

[@jsprankel4712]

@@DIYwithMichaelBorders According to the US Fire Administration website, we have lost 1,029 people in the United States due to fire in their homes so far this year. In each and every case there were smoke alarms in the home that were not working. Test your alarms monthly, replace the batteries annually, and replace the alarm when they are over 10 years old! Follow my Facebook page at "PCFD Fire Safety Education" for more information.

[@DIYwithMichaelBorders]

J Sprankel Great advice & thanks for sharing. Simple preparation goes a long way. Keep in touch! 😎👍🔧🔩

[@stevenA44]

I have this same smoke detector and it ended up being the 9 volt battery. It was showing 7.8 volts so I replaced it with a new one. I reset it like you showed, so hopefully it's stop chirping. It only did it once in a while, but seems like the same time every night.

[@DIYwithMichaelBorders]

Terry C. Thanks for watching & we are happy the video helped Terry. Although these little fancy engineered gadgets can be annoying when chirping & beeping in the early morning hours....they sure are important to have set up in the proper configuration...fresh battery, cleaned, & reset. 😀👍 We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come! 😀 Let us know if you have any questions. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again. 😎👍🔧🔩

[@jmasca05masca92]

Thanks for the video!!!!!! 👍🏻👍🏻……. You just saved a lot of people from that annoying chirp lol!!!!!!!!!!

[@Patrick-gm8ui]

Good work! Straight forward!

[@anuragchatterjee1878]

Thanks for posting this helpful video. Much appreciated!

[@DIYwithMichaelBorders]

Good morning ☕️ you’re welcome. A successful DIY project ranks up there with the best, enjoy that rewarding feeling. You will continue to benefit greatly by making your projects DIY. Let us know if you have any questions and hey if you’re interested, join our DIY ecosystem and help us grow an exclusive group of DIYers. toolboxtoken.com Reach out to us any time! 🧰

[@syedjavedahmad9719]

Best teacher.

[@DIYwithMichaelBorders]

Syed Javed Ahmad Thanks for checking out the video. We hope the video helped! These little detectors can get pretty annoying when going off in the middle of the night for the “wrong” reasons. Below is a link to our Appliance/Home Repair Video PlayList. It contains several videos that you can benefit from including additional videos on Smoke Detectors...definitely check it out! kzbin.info/aero/PLjCXOz8TSkZmG-ZbhhKPj4Vh3K3MDPXii Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@roselucht4583]

Thank you this has to be the answer! We’ve tried everything else

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. Please keep us posted. 😎👍

[@zhonglinma3234]

Really appreciate your instruction!

[@DIYwithMichaelBorders]

Thanks for sharing this & that’s awesome to hear. Us DIY’ers need to stick together! Let us know if you have any questions, hope all is well.