Garage door opens then closes - EASY FIX - How to program Travel System!

[@ramonrodriguez6849]

After 27,657 videos about the sensor, finally this is the right one. Thank you so much.

[@mariambah5349]

I agree 💯

[@legoandsushi]

Thank you for that tutorial on how to fix a garage door that reopens after closing! Your video was the only one I found that fixed my Genie garage door. It even opens more smoothly now.

[@DIYwithMichaelBorders]

Great morning to you ☕️ That’s awesome to hear, and we appreciate you sharing this. Many more helpful videos to come! 🧰

[@mellamotoro]

I see plenty of similar comments but gotta tell you…THIS SAVED MY A$$. Much appreciated brother.

[@123Pazu]

Thank you for the detailed instructions. We reprogramed it once and the door is working again. You saved us $95 service call. :)

[@DIYwithMichaelBorders]

That’s awesome, we appreciate you watching, and you are very welcome. An extra $95.00 going into the weekend is a great thing!!! 😎👍

[@gaylebrown3109]

Thank you for this video! This was the same button configuration on my door opener, manual long since gone from 3 owners ago. The steps you performed didn’t work for me initially. I kept going through the comments to find others who noted that combers and leaves blocking the sensors were the culprit. After some trial and error, I discovered it was the pull rope a former owner had tied to the bottom of the door to operate it manually. It was swinging into the path of the sensor. I secured it to the door to keep it out of the way, and now the door functions properly!

[@DIYwithMichaelBorders]

You are welcome, and awesome job making it a DIY project and pinpointing the swinging rope as the culprit. Trial and error paid off and we appreciate you taking the time to share this. 😁👍

[@CB-ep8mf]

I recently had to replace the opener bracket on my garage door. After replacing the bracket, my garage door would hit the ground when closed and come back up. This video worked to perfection. Thank you..

[@DIYwithMichaelBorders]

Awesome, that’s great to hear. Only thing better than that is YOU taking on this DIY project. Let us know if you have any questions and hey if you’re into crypto, join our DIY ecosystem. toolboxtoken.com Reach out to us any time! 🧰

[@claymills4356]

Oh my! Even I was able to follow your awesome directions and fix this annoying problem with a very new opener system! Thank you so much for the step by step comments and pictures to follow! This worked perfectly and saved a service call…..Yay!

[@DIYwithMichaelBorders]

You are very welcome Clay, so happy to help. A garage door that’s not doing what it’s designed to do can definitely be annoying. Hope all is well, thanks again Clay.

[@DIYwithMichaelBorders]

@@claymills742 We like that!!! 😁

[@simonmac1812]

This is the only video that solved my problem and saved me money. Thanks a bunch!

[@DIYwithMichaelBorders]

@@simonmac1812 We are honored to hear, and you are very welcome. Awesome job making it a DIY project. Saving money is great! 😎👍🧰

[@gangstajesus4145]

Thanks for the information. I was about to resort to some tough love in the form of a flying side kick to my garage door lol

[@DIYwithMichaelBorders]

Psycho gaming Thanks for watching & we are happy to hear the video helped. Us fellow DIY’ers need to stick together! 😎👍🔧🔩

[@joshdryden85]

Freaking same

[@DIYwithMichaelBorders]

Josh Dryden 😎👍🔧🔩

[@wilraimlab7192]

Lmao 😜

[@hankmillerusa]

A

[@vegascatrescue335]

My first time doing this on a garage door, it worked perfectly. Thank you for sharing this.

[@DIYwithMichaelBorders]

@@vegascatrescue335 Good morning ☕️ That’s awesome, we are honored to help. 👍👍 goes to you though for making it a DIY project! 😁 You will continue to benefit greatly over the years by making your projects DIY! 🧰

[@ahucatitlan]

Thank you for uploading this video. You just saved me a few hundred dollars!

[@DIYwithMichaelBorders]

Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community. That means the world to us, thank you. Our goal continues to be getting you the info you need without wasting your valuable time. Let us know if you have any questions.

[@tsgtdenariusmitchell2595]

Thank you!! Spent hours trying to fix my garage door before finding your video. Problem fixed in minutes! Once again thank you for saving $$$

[@DIYwithMichaelBorders]

Very cool, thanks for watching. Hopefully many stress free days ahead for you. 😎👍

[@chynawhyte8006]

Omg tyty been trying to fix garage for over a week. Watched this and garage was fixed in 5 minutes ty soooo much

[@DIYwithMichaelBorders]

Great to hear and we appreciate you sharing this. Hopefully many stress free days ahead for you. 😎👍🔧🔩

[@jpvintage]

I was receiving a 4-1 error code: excessive force detected, on my chamberlain lift system. This worked flawlessly! Thank you!! Much appreciated 😊

[@DIYwithMichaelBorders]

Good morning Pamela, thats great. A flawless victory! 😁 We are drinking our morning coffee answering any and all questions for the DIY community. Thanks for being so kind to share this comment. Hey if you’re into crypto trading, join our DIY ecosystem. Exciting Roadmap ahead. Toolboxtoken.com We DIYers need to stick together! 🧰

[@r.cbailey3936]

The video was very good I just bought a new craft one garage door opener and program that just like you said it works beautiful.

[@DIYwithMichaelBorders]

Good morning, we are drinking our morning coffee answering any and all questions for the DIY community. That’s awesome, a new garage door unit is a great investment. Let us know if you have any questions.

[@chadsnickgary5402]

Literally the only video that made sense and actually worked

[@DIYwithMichaelBorders]

@@chadsnickgary5402 We are honored to read this, we are so happy that our video was useful. Let us know if we can help answer any questions. 🧰

[@andrechanthery7197]

Thanks!!! this has fixed my issue when the garage door suddenly didnt want to open

[@DIYwithMichaelBorders]

Awesome! 😁👍 That’s great to hear, especially going into the weekend. Thanks for taking the time to share this. 🧰

[@mandilake9227]

THANK YOU!!!!! This video saved my husband and I a call to a technician that no doubt would have charged an arm and a leg for such an easy fix. Much appreciated 👍🏼

[@DIYwithMichaelBorders]

Mandi Lake Thanks for watching & glad to help. You can put that money toward something else. Us fellow DIY’ers need to stick together! 😎👍🔧🔩

[@am1lee]

Wow, 15 minutes between open and open again. Now I have to schedule going out 15 minutes advance, thanks a lot agile!

[@DIYwithMichaelBorders]

@@am1lee Thanks for watching, not sure if that constitutes as a successful re-program… Let us know if you have any questions.

[@sprintcarracing50]

You Sir are MUCH appreciated!! Thank you for solving my issue. We left on vacation and came home to this issue. Life saver…!

[@DIYwithMichaelBorders]

What’s up Chris, so happy to help. Thanks for watching. 👍

[@scottsevigny4288]

Greatly appreciated your help worked fixing my door after a power outage

[@DIYwithMichaelBorders]

Scott, thanks for watching. Power outages are no fun, happy to hear the video was helpful. 👍

[@David-kc9sn]

I've been searching for the right answer and I found it my door now works 😊 thanks a million 👍🤔😀

[@DIYwithMichaelBorders]

@@David-kc9sn Awesome, we are honored to hear our video helped. A true testament to the power of DIY! Enjoy that rewarding feeling. 🧰

[@shirleyc5961]

This video is very helpful and we were frustrated when the problem happened to our garage door. We are so glad that we found this video and followed the exact steps, It worked!! You saved our life and money too. THANK YOU!

[@DIYwithMichaelBorders]

Good evening Shirley, welcome to the DIY Raptor Club. Great to hear you’re back up and running. You can spend your money on something more meaningful. Let us know if you have any questions along the way. Hopefully many stress free days ahead for you. 😎👍🔧🔩

[@flyty2240]

Awesome video! Thought I was going to have to contact a tech and spend $$$, but was able to fix issue because of this video. THANK YOU!!

[@DIYwithMichaelBorders]

You are very welcome, thanks for watching. Keep that $$$ in your pocket for something more meaningful. 😎👍🔧🔩

[@RonieSalvador-y5y]

I just fixed mine following your post. Thank you so much.

[@DIYwithMichaelBorders]

You are very welcome. 😁👍🧰

[@niecolelias9806]

Thank you so so much for the easy fix.. I was going to call the tech in morning and I know it was going to cost me.. Thx again.. 😊😊😊

[@tecent2004]

This video more than likely saved me some money! I was going to call someone to come out and take a look at it. Great video! I followed your instructions to the tee and it worked like a charm! Thanks!

[@DIYwithMichaelBorders]

Very cool & that’s great to hear. We appreciate you sharing this. Us fellow DIY’ers need to stick together. Hope all is well, enjoy your day T C. 😎👍🔧🔩

[@josemena7644]

Thank you so much for this Quick, Detailed, refresher Course!! Sincerely 🙏🏼

[@DIYwithMichaelBorders]

That’s our goal, getting you the info you need without wasting your time. Thanks for watching. 👍

[@deenugent473]

Thanks for the video. I believe the model of your garage is almost the same as mine (Craftsman). Just starting to have this issue and will give your suggestion a try. Hopefully it will fix it for good.

[@DIYwithMichaelBorders]

Dee Nugent Very cool and thanks for reaching out to us. Let us know if it helps and if it does not, let us know what you are experiencing or how it’s performing. Us fellow DIY’ers need to stick together. Many more helpful videos to come! Please subscribe to the channel and ring your KZbin bell 🔔 that would be awesome thanks again. 😎👍🔧🔩

[@deenugent473]

@@parislady1925 The YELLOW button is the "learned button". I believe you hold this YELLOW button while you're pressing the remote garage opener, to allow it to learn in order to operate. I hope that helps!

[@BLACKFOOT12345]

Just the video and instructions I needed. Thank you!!

[@DIYwithMichaelBorders]

Good morning, just poured a ☕️ and am sitting down to answer any and all questions for the DIY community. We are honored to hear that, thank you for sharing this. Let us know if you have any questions and hey if you’re interested, join our DIY ecosystem and help us grow an exclusive group of DIYers. toolboxtoken.com Reach out to us any time! 🧰

[@wgc383]

I did this repair today, thank you so much, saved me a service. Worked great. My issue was random because my door just went screwy for no reason after 4.5 years, not sure why it failed in the first place. Thanks again, cheers brother

[@DIYwithMichaelBorders]

Wes C Awesome Awesome & thanks for watching & that’s great to hear. We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come! 😀 Let us know if you have any questions. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@naeaswami]

Perfect! Mine was opening partially then stopping. This solved the problem. Only took two minutes!

[@DIYwithMichaelBorders]

Awesome, 2 minutes for a successfully completed DIY project is the best. Thanks for watching. 😎👍

[@ericd.5586]

your video helped me adjust a downforce issue. my door was coming up with a loud noise. IMO it was too much pressure closing. which made the door uneven. so when it corrected itself coming up. it was a noice that simply bothered me. i went through your steps and the issue was solved thank you !!!!

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. We appreciate you sharing this. Sounds like you’re back up and running. Let us know if you have any questions. Us fellow DIY’ers need to stick together. 😎👍🔧🔩

[@melikonlife]

After watching 20 videos your the only one that helped

[@DIYwithMichaelBorders]

We really appreciate you watching, hopefully you learned a little bit from the other 20. 😀 Let us know how your DIY project goes.

[@Staphany]

Thank you so much!! Helped me and my dad out a lot!

[@DIYwithMichaelBorders]

Great to hear & we are so happy to help. Let us know if you have any questions. 😎👍🔧🔩

[@lear_oner5235]

My guy, this legit saved me a huge headache lol. Amazing quality video and tutorial. Thank you.

[@DIYwithMichaelBorders]

Thank you so much for this comment, we really appreciate it. We are always here to help answer questions. Happy to hear the video was helpful. Keep in touch, us DIYers need to stick together!!! 😎👍

[@chaosclown33]

Awesome advice helped me fix my garage door😊

[@DIYwithMichaelBorders]

We are honored to hear, thank you.

[@mb4lunch]

OMG! You made me some money.... My customer was about to call someone else! Thanks

[@DIYwithMichaelBorders]

MB4LUNCH Thanks for watching, let us know if you have any questions. 😎👍

[@KawikaDowney]

Thank you!! This did it. On mine when opening I needed to release the button before it hit the bolt that is close to the door opener. Thanks

[@ftdlima]

Great video. Helped me fixing this issue

[@DIYwithMichaelBorders]

Good morning ☕️ we are honored to hear. Thank you for taking the time to reach out to us. 👍🧰

[@rana.dickey439]

Wowzers 😂😂the frustration I endured. Thank you

[@DIYwithMichaelBorders]

Thanks for watching, frustration is no fun. Are you back up and running?

[@gojojogo86]

Thanks so much! Hubby went and touched buttons he shouldn’t have 😂 you save us a trip from the technician

[@DIYwithMichaelBorders]

Very cool, great to hear our video helped. Let us know if you have any questions.

[@abbiegc7456]

I learned something new today, thanks sooo much!!

[@AzNightmare]

*I wished I've seen this video sooner. I ordered thicker weather strip and did the grunt work to slide out the old one and slide in a new one. And it still left gaps underneath the garage door. After learning that it's possible to adjust the limits, now the garage closes tight. I probably didn't need to replace the weather strip.*

[@DIYwithMichaelBorders]

Good morning ☕️ we are happy to hear you made it a DIY project. On top of getting your door re-programmed…you got new weather stripping as well. 😁👍🧰

[@VijayKumar-nd6cg]

Thank you so much .Finally fixed my garage door. 👍

[@shafiullahadil483]

This video saved my couple hundreds dollars ❤

[@DIYwithMichaelBorders]

@@shafiullahadil483 Saving hundreds of dollars is a great thing. We appreciate you reaching out to us. 😁👍🧰

[@songphan6615]

Thank you for your video. I just fixed it by following your instruction. That is so helpful.

[@DIYwithMichaelBorders]

Good morning & welcome to the DIY Raptor Club. We appreciate you watching & we are happy to help. Us fellow DIY’ers need to stick together! Enjoy your day. 😎👍🔧🔩

[@alliz7707]

Thank you 🙏 I just programmed my door ! Great instructions

[@DIYwithMichaelBorders]

We appreciate that Alex, thanks for watching. Let us know if you have any questions, enjoy your night. 😎👍🔧🔩

[@pattyanderson7373]

Worked perfect...great video😊 Thank you.

[@DIYwithMichaelBorders]

Hi Patty, thats awesome! Thats very kind of you to share and we strive in getting you the info you need without wasting your valuable time. Let us know if you have any questions and hey if you’re into crypto trading, check out our newly launched DIY ecosystem. Toolboxtoken.com Reach out to us any time. 🧰

[@unquedao]

Thanks you just saved my life with this video

[@DIYwithMichaelBorders]

Omar Cartagena So happy to help. Us fellow DIY’ers need to stick together. Please subscribe to the channel and ring your KZbin bell 🔔 this will be very helpful to us thanks again. 😎👍🔧🔩

[@shamskhan3382]

Thanks for your video it help me to fix my garage door

[@DIYwithMichaelBorders]

Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community. Awesome, you are very welcome. Thank YOU for not only watching, but taking the time to share this. 😎👍 Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and become part of an exclusive group of DIYers. toolboxtoken.com Reach out to us any time! 🧰

[@falcundo]

Thanks bro. Fixed my garage and saved a service charge thanks to your video.

[@DIYwithMichaelBorders]

Henry C Awesome & you are very welcome Henry. Let us know if you have any questions. Many more helpful videos to come. 😀 Please subscribe to the channel and Ring your KZbin Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@louielouie3150]

Thank You so much I saw a bunch of videos but your fixed the issue . Lifesaver

[@DIYwithMichaelBorders]

Awesome, & you are very welcome. Thanks for watching & sharing this, welcome to the DIY Raptor Club. 😎👍

[@lannyluckyj3227]

Thanks for the info, just fixed my garage door with the same problem

[@DIYwithMichaelBorders]

You are very welcome. Thanks for watching. Let us know if you have any questions. 😎👍🔧🔩

[@MrVaggos147]

Thank you! Just reprogrammed my garage door open. Very detailed presentation!

[@DIYwithMichaelBorders]

We appreciate you sharing this & you are very welcome. Hope all is well with you and your family. Welcome to the DIY Raptor Club. 😎👍

[@stevejordan4791]

Thank you VERY MUCH! Literally just watched this and followed every step. 🙏🏽

[@DIYwithMichaelBorders]

You are very welcome & welcome to the DIY Raptor Club. Sounds like you’re back up and running. Us fellow DIY’ers need to stick together! Let us know if you have any questions, enjoy your day. 😎👍🔧🔩

[@sisithan8877]

Thank you very much. You save me from stress.

[@zacharymathews8781]

Thank you it help me solve my door problems 😀😀😀

[@DIYwithMichaelBorders]

So happy to help. Thanks for watching. 😎👍

[@dabkat7108]

THANK YOU. holy 💩. I was so nervous about telling my husband I messed up the garage by programming a new remote but this video saved my 🍑. 😂

[@MrKarnbir]

Thanks! Saved me money time and headache

[@DIYwithMichaelBorders]

You are very welcome. Saving money, time, and a headache is a great thing! 😎👍

[@barbaravaughan9866]

Ready to call a repairman then remembered KZbin. Easy fix. Thanks so much. Why would this all of a sudden start happening?

[@DIYwithMichaelBorders]

Thanks for watching & we appreciate you sharing this. Several things can cause this unfortunately. 1. Wrong brand of LED bulbs 2. New home WiFi install 3. New home security system install 4. Added power lines around home Hope all is well with you. 😎👍

[@joshwilburn8950]

Dude! TY. Saved me a service call

[@DIYwithMichaelBorders]

So happy to help. Thanks for watching. 😎👍

[@Bobi-kw5ec]

Solved my problem. Thank you so much. Clearly explained

[@DIYwithMichaelBorders]

Good morning ☕️ that’s great to hear, thank you for sharing this. 😁👍

[@RickyxEvans]

Your the only one that help bro you a real one ☝️ like and commented

[@DIYwithMichaelBorders]

Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community. That means the world to us, no joke. Our goal continues to be getting you the info you need without wasting your valuable time! 😁👍 Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and become part of an exclusive group of DIYers. toolboxtoken.com Reach out to us any time! 🧰

[@johnsonpaul999]

Thanks a lot. I fixed my garage door opener problem with your instructions.

[@DIYwithMichaelBorders]

Very cool & we appreciate you watching. Let us know if you have any questions. Enjoy your night. 😎👍🔧🔩

[@garygreen6755]

OMG...life changing. Thank you so much!!!

[@DIYwithMichaelBorders]

Hi Gary, you are very welcome. Definitely puts you in a great mood tackling your DIY project, and we appreciate you sharing this.

[@michaelhiggs8651]

Also disconnect the door (handle) with the manual pull and reattach it. mine had so much tension on it I believe that was the culprit.

[@DIYwithMichaelBorders]

Awesome, thanks for sharing this Michael. 😎👍

[@Sumerian720]

Thank you! This was SUPER helpful!

[@DIYwithMichaelBorders]

You are very welcome, SUPER helpful is what we are aiming for. 😎👍🔧🔩

[@kofibonsu8466]

Dude thank you so much!!!! Finally a video tht was clear and concise

[@DIYwithMichaelBorders]

You are very welcome Rene, thanks for watching. Clear & precise is what we aim for. Hopefully many stress free days ahead for you. 😎👍🔧🔩

[@tekesbur]

Excellent it worked thank you!!!

[@DIYwithMichaelBorders]

@@tekesbur You are very welcome! 😁👍🧰

[@jlu9512]

Good demo, thanks

[@DIYwithMichaelBorders]

@@jlu9512 We are honored to help. 🧰

[@hoorbhanpuri854]

Amazing, worked exactly has you detailed out. Thank you!!!!

[@DIYwithMichaelBorders]

Awesome, that’s a great feeling. A+ to you for making it a DIY project. Welcome to the DIY Raptor Club. 😎👍

[@sibylmartin3369]

Perfect instructions!!! Thank you so much ☺️

[@DIYwithMichaelBorders]

Good morning, that’s great to hear & we appreciate you sharing this, hope all is well. Enjoy your weekend. 😎👍🔧🔩

[@sslamd]

Bro!!!! Thank you for the instructions 👏👏👏👏👏👏👏

[@DIYwithMichaelBorders]

You are very welcome, thanks for watching. Welcome to the DIY Raptor Club. 😎👍🔧🔩

[@jerbs1]

You are a garage god. Sending virtual fist bump your way.

[@DIYwithMichaelBorders]

Jerin Thanks for watching. That’s why we love KZbin. Many more helpful videos to come! Us fellow DIY’ers need to stick together! 😀 Please subscribe to the channel and Ring your KZbin Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@roytsusui1761]

Good vide but maybe you should show on on lubricating and maintenance?🤔

[@DIYwithMichaelBorders]

Thanks for watching & sharing your thoughts. Great thought! Below is a link to our video showing the lubrication project on this exact door. kzbin.info/www/bejne/Y5e4knywh7ibq8U Hope all is well with you and your family. 😎👍🔧🔩

[@rtblade4]

Our door will not close with out pressing down the button on the wall the entire time it closes. It will also start going up while trying to close and you have to press the button several times to stop the going up and get it to close again. Will resetting the travel cure the problem? The remote in the cars will open but not closed the door. When you try closing it with the remote, the light blinks festively and the door doesn’t move

[@jaredjanish6135]

Thank you for the video. It is working properly and as instructed.

[@DIYwithMichaelBorders]

That’s great & thanks for watching. We appreciate you sharing this. Enjoy your night Jared. 😎👍🔧🔩

[@mixelfutbolero]

Definately worked bro. I appreciate this beneficial informative video

[@DIYwithMichaelBorders]

Great to hear & hopefully many stress free days ahead for you. 😎👍🔧🔩

[@bluemoon9868]

I do not understand why you had to press the button three times back and forth from 2:26 to 2:36. What was that for?

[@DIYwithMichaelBorders]

@@bluemoon9868 Thanks for watching, that’s just the internal coding of the computer. Following your systems exact programming steps will get you the best results. What kind of unit do you have, we can hopefully help.

[@bluemoon9868]

@@DIYwithMichaelBorders Thank you so much for your help. Every time I press the down button on the remote , my garage door starts going down but then always goes back up when it is about 4 inches from the floor. Then the light flashes, and I have to press the down button on the remote again for a second time. Then it works.

[@DIYwithMichaelBorders]

@@bluemoon9868 We are happy to help. Are you able to reprogram your Travel System…?… or is the unit not letting you?

[@bluemoon9868]

@@DIYwithMichaelBorders Yes, I am able to reprogram. Actually I reprogrammed it 3 months ago. It seemed to be OK, but in the last 2 weeks, the problem was back again.

[@DIYwithMichaelBorders]

@@bluemoon9868 That’s no fun, you may find it best to fully unplug system from upper ceiling outlet and leave unplugged for 30 minutes. This will allow your system to fully reset.

[@mikesmith1702]

Thank you! Absolutely excellent video. I can't thank you enough. I subed.

[@DIYwithMichaelBorders]

You are very welcome, so happy to help. Thanks for watching & subscribing, we subscribed to your channel. Hope all is well. 😎👍🔧🔩

[@polarlab113]

When did you lube the system last?

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. We usually re-lubricate system every other year. 😎👍

[@ismaelcaldera3301]

Aug 2020 and just used your tutorial to program my garage door. Thanks

[@DIYwithMichaelBorders]

Ismael Caldera That’s great to hear & we really appreciate you reaching out to us. We are happy to hear the video is still helping. Definitely let us know if you have any questions. Us fellow DIY’ers need to stick together! 😎👍🔧🔩

[@ismaelcaldera3301]

We really do. Sometimes its hard to pay for services all the time. I always try to do it myself. And have been getting better. I installed a broken spring on the door.

[@DIYwithMichaelBorders]

Ismael Caldera Well done! 😀👍

[@jaimetiongson9315]

Adjusting the travel (specially on the close position) will make the moving parts last longer. Thank you for sharing this video.

[@DIYwithMichaelBorders]

Jim Tiongson Awesome & thanks for sharing your thoughts Jim, we appreciate it. We hope this video helped your garage door project. Let us know if you have any questions. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@ajhewison]

Worked for me, thank you so much

[@DIYwithMichaelBorders]

Good morning ☕️ you are welcome. Hope you have an enjoyable weekend. 🧰

[@eyadelsafadi1692]

i have a liftmaster security+ 2.0 will this work on it

[@DIYwithMichaelBorders]

@@eyadelsafadi1692 Thanks for watching. It will be similar however have one more, or one less step. The exact procedure should be printed on your motor housing/casing near these buttons. ☕️🧰

[@mikehoffman3690]

Better than the manufacturers instructions. 👍

[@DIYwithMichaelBorders]

Mike Hoffman Great to hear & so glad to help. Us fellow DIY’ers need to stick together. Many more helpful videos to come. Please subscribe to the channel and ring your KZbin bell 🔔 that would be awesome thanks again. 😎👍🔧🔩

[@kimdagnillo8246]

My lift master wall button stopped working, no light, I switched it out , the light came on when I connected the wires, but it wouldn’t work the garage door. I’m sending it back to Amazon, IDK what else to try, if it’s a program issue I have no idea how to do it. Im just using my remote now. If you have any suggestions I’d appreciate it, I don’t want to pay hundreds for something I could do myself.

[@DIYwithMichaelBorders]

@@kimdagnillo8246 Thanks for watching, that’s no fun. There should be instructions to reprogram your wall mounted push button mechanism. Likely in owners manual. If that doesn’t work, we recommend unplugging motor from ceiling outlet and leaving disconnected for 5 minutes…this will reset your control board inside motor housing. 🧰

[@cnnutall]

This video usually works for me (I always return to it) but today it still came back open after the travel adjustment. I'm not sure what to do now?

[@RobPostal]

same here, ever resolve it?

[@lesliewhite8054]

Thx for the tip!

[@The-Wise-One]

Same issue

[@RiazSyed-n1x]

Me too

[@wecarespares]

I have the same problem. I think my roller door is out of alignment. i.e left is higher than right. Cause it to bit while operating by the motor

[@AwukuAnatomy]

This guy is genius❤❤❤❤❤❤❤❤❤❤❤❤❤❤

[@coco7620]

Sorry, you said “push and hold” every time but you just pressed the button, do I need to hold or not?

[@DIYwithMichaelBorders]

@@coco7620 Thanks for watching, if your instruction sticker located on motor housing states push and hold, it will be required. Keep us posted on your progress. 🧰

[@pencowgirl]

Today I hit the open button on the wall, the garage door opened, then reversed and put a hole thru my car. This is a new home( about a year old). I grabbed the opener inside the vehicle and reversed it. The temperature dropped 30 degrees last night, any thoughts on potential causes? I’m afraid now to park a car in the garage

[@pencowgirl]

I should have explained garage door came down while I was backing out

[@karrarahn7565]

Thanks for your help.

[@DIYwithMichaelBorders]

You are very welcome Karra, and a special thanks to you for taking the time out of your Tuesday afternoon to share this comment, it means the world to us.

[@mikehawke7149]

Thanks bro I would have never figured that out on my own

[@DIYwithMichaelBorders]

We are happy to help, that’s what we’re here for. Reach out to us any time. 👍

[@batanghamogofficial]

1,000,000 Thank you sir 🙂🙂🙂🙂

[@DIYwithMichaelBorders]

So happy to help. Thanks for watching. 😎👍

[@susanchitra9888]

It’s works for me, thanks

[@DIYwithMichaelBorders]

@@susanchitra9888 You are welcome. 😁👍🧰

[@AS-xc2xf]

Thank you you have helped me today

[@dudetube79]

I followed these instructions and the garage door no longer opens on its own, however, the small light next to the yellow button on the garage opener keeps blinking, any idea why?

[@DIYwithMichaelBorders]

Good morning ☕️ that’s awesome. As far as the blinking light, you may need to just reset your unit. We recommend unplugging the unit from the ceiling outlet receptacle and leaving unplugged for a minimum of five minutes. This will allow your system to fully reset.

[@jeraldbarret]

Thank you so much work great now. Thanks to you

[@DIYwithMichaelBorders]

Hey Jerald, you are very welcome. Thanks for watching, enjoy your weekend.

[@brucewilliams7239]

When programing my garage door opener the door will not stop when the up or down button is released. Any suggestions for this issue?

[@DIYwithMichaelBorders]

Good morning, that’s a bummer. We are drinking our morning coffee answering any and all questions for the DIY community. Here’s what we recommend, unplug unit from ceiling outlet and leave unplugged for a minimum of five minutes. This will allow your system to perform a full reset. After five minutes, plug unit back in and perform re-programming of Travel System. Keep us posted. Also if you’re into crypto trading, join our DIY ecosystem. Exciting Roadmap ahead. Toolboxtoken.com We DIYers need to stick together! 🧰

[@brucewilliams7239]

@DIY with Michael Borders Thank you for such a quick response. I have unplugged the unit overnight but did not unplug the battery backup. I'll try unplugging both again and start over with the programming. Regards Bruce Williams Chandler Arizona

[@DIYwithMichaelBorders]

@@brucewilliams7239 That’s what we’re here for, to support and interact with the DIY community each and every day. Looking forward to hearing back from you Bruce.