DJI Avata 2 Full Cinerip | Dronarchy FPV

Watch this truly immersive ride with the DJI Avata 2. Massive freestyle in acro mode with fast 940 rates. Absorb the brutalism within a full drone shot, covering cinerips over water, trees, gaps and trippy spins. This is what the Dronarchy is all about, ripping drones like no one will ever imagine.
Stay tuned for the next clips and bangers. Cheers!
#dronarchy #djiavata2 #avata2 #dji #fpov #drone #fyp #games

[@sandrucristian1983]

It's exactly the freestyle flight with avata 2 that I wanted to see, congratulations and thank you.

[@dronarchy]

you can do this bro. Send that clip, make it happen 👊🔥

[@1upFPV]

sucha great video and sucha great pilot!!! thanks for you content and constant bars you set ! thank you for making it fun and exciting at the same time!

[@dronarchy]

if I can do this and I'm a Mavic pilot, then imagine what you can do if you put the time. Facts 👊✅

[@safakaswedishairgunforum-n1490]

Awesome flying Brother 😁👌🏆🏆🏆

[@dronarchy]

@@safakaswedishairgunforum-n1490 more clips soon 🔥🫶🔥

[@bashrushdn]

Phenomenal flying as usual man. Btw thanks for the rates, it was a game changer for me!

[@dronarchy]

650° is ok to start ripping freestyle, till they get use to agile rates. Then crank it up to 900+ 👊😎.

[@bashrushdn]

@@dronarchy jyeah, im quite surprised myself, I didnt think the avata 2 can be that agile. It behaves really close to the TrypFPV simulator that I use to practice. Like you said, the problem is not the drone, its the pilot. Keep rockin that avata boss 🤘🏻

[@dronarchy]

@@bashrushdn it takes more throttle control. Anything is possible if you know how to execute it.

[@arianitgjonbalaj7334]

Show me the rates and expo

[@RCTeamAustria]

stunning flight!

[@dronarchy]

Thanks a lot!

[@Major_R10T]

The music is perfect 🔥

[@dronarchy]

Liquid Drum and Bass 💯🔥

[@alfa.pixels]

The problem isn’t the drone, it’s the pilot. Those who get it, get it.

[@dronarchy]

once you practice enough, you can pull anything with what you have 🫶

[@brennanIX]

Yeah, the people who hate on this thing are morons. This is like, one of if not THE best FPV drones on the market. Outside purpose built drones for niche circumstances, or people who just enjoy DIYing something. You'd be better off with 10 prupose built drones, all made for a spwcific purposw,, but the avata 2 is basically a jack of all trafes, while a master of none. If you can only have a few drones, the avata is the best single fpv drone If you just wanna buy and fly, nothing out there beats it. Maybe you lose a tiny bit of maneauverability, or speed, or acceleration, but I'd rather sacrifice that a bit when everyone else is losing signal, or changing their batteries for the third time, or lugging around a go pro adding weight and drag, and making the already non-existent battery life even shorter. The modularity and repairability isn't there, but that doesn't matter when for $50, you just get a new one. It's not like replacement parts are free, and good luck having someone send you a brand new one if you lose your custom FPV drone. I mean, don't get me wrong, you should still absolutely fly custom FPV drones AT LEAST once, but they are definitely nowhere near a "daily driver" like this is. I think people are just jealous this is so good, and don't wanna feel like a "noob consumer" from flying an easy to use, mass market drone. I think a big part of it is misguided elitism, and not wanting to admit a drone you can just run to the store and pick up 2 of them on a Tuesday, is a better drone than your custom built Frankenstein.

[@dronarchy]

@@brennanIX you hane no idea how much fun I have with this drone. Still using the same props from day 1!

[@alfa.pixels]

@@brennanIX Absolutely right! The DJI Avata 2 combines versatility and user-friendliness in an impressive way. It’s perfect for pilots who want the best of both worlds, cinematic and FPV. Your points hit the nail on the head.

[@billyraymyers1002]

Idk check fpv Fenix, I doubt that level could ever be achieved with this drone, don't get me wrong it's a great starter drone but there's definitely a cutoff

[@MKGraphics]

Perfect, love you fly style.

[@dronarchy]

thanks, more clips ahead!

[@Drone_Gambit]

I just got this beast two days ago. Now it's time to learn flying in manual mode!

[@dronarchy]

check my other clip that explains the rates and setup. Will help a ton 👊

[@Drone_Gambit]

@@dronarchy Done! Thanks & keep making content like this - great FPV skills. Greetings from Belgium. PS: Any recommendations on a good simulator?

[@alving7585]

@@Drone_GambitI like the feel of LiftOff, but I like the look of TrypFPV and Uncrashed FPV so I use all 3 lol.

[@aerulfpv]

This what i'm wating...interesting

[@dronarchy]

@@aerulfpv will continue posting Avata 2 clips 💥

[@paulgolden8183]

Nice 👌

[@dronarchy]

Thank you! Cheers!

[@WilcktoneOliveira]

The best!

[@dronarchy]

too much fun bro. Anyone can fly this.

[@WilcktoneOliveira]

@@dronarchy @dronarchy I'm training in the simulator to have this courage kkk, I bought the drone but it's still stalled. Watching your videos is helping me a lot, I'm glad the internet is there to connect you to me, even if I'm in Brazil!

[@xavimachfilms]

Hi awesome flying, exactly what I wanted to see! Can you give us links for all the accessories? Thank you so much and keep posting this videos! 🙌

[@belovedLion80]

Love these vids, ya dig

[@dronarchy]

mad fun, more clips ahead!

[@AB-bu8ti]

epic!

[@dronarchy]

@@AB-bu8ti fun days 🔥

[@ARTIKUL777]

🗣WOW ☝️nice🎮skills✔️

[@dronarchy]

you can do this with enough practice. Go out and send it 👊

[@acquisitioncode7903]

Thanks for the video I was already thinking that it might have been a bad buy but I guess I need to work on my skills. Can you share your rates please

[@dronarchy]

@@acquisitioncode7903 you have great gear. Now is time to upgrade your skills and send it 👊💯

[@FlowchilledFPV]

I really love your videos and clips.. I am having the Avata 2 as well. Please come to Germany and train me :D

[@dronarchy]

danke bruder 👊. Yes, I need to visit Germany again. Ludwig's castle need a proper rip 😉

[@asaki_drone]

That's so great!!✨✨ By the way, where did you buy the propeller guard and propeller??👀✨ There are so cute!!!🥰

[@dronarchy]

@@asaki_drone from OriginalDobo Etsy store.

[@asaki_drone]

@@dronarchy thanks!!🥳

[@toastyvr3505]

Nice 👍💯✌️

[@dronarchy]

always fun bro 🔥

[@blakeedition2903]

Nice your getting better. What settings you using now

[@dronarchy]

hey Blake, I show all my settings and rates on my video called Pro Ripper. Check it out 👊😉

[@fauzanfsa]

Always enjoy watching your quads fly under obstacle at high speed. BTW, how much throttle percentage do you use during recovery?

[@dronarchy]

great question. It depends on the situation. Would say 60% to 70%. If it's a nasty trick with a small dive then 100%.

[@fauzanfsa]

@@dronarchy Thank you bro... Would the conditions change if the default prop from the Avata 2 is used?

[@teampirate3311]

Wow trop bien !! Ça fait une semaine que j'ai commencée avec mon avata 2 , j'ai encore beaucoup de pilotage à apprendre !! Quel tilt utiliser vous pour ce genre de clip ?

[@dronarchy]

J'en utilise 25° 👊🔥

[@teampirate3311]

@@dronarchy merci 🔥

[@donyp123]

Awesome stuff. Could you share the details of the 3D prints, please?

[@dronarchy]

must upload it to Thingiverse. Keep in mind that you will need double sided tape.

[@donyp123]

That's would be greatly appreciated :) thank you

[@hidden_mode]

Awesome! what prop did you use on Avata?

[@dronarchy]

thanks for asking. These are HQ 2.9x2.7x3 which gives more control due to lower pitch value. Had to use smaller screws, because they are slimmer.

[@hidden_mode]

thanks for the answer 👍

[@malATX]

@@dronarchyi got these props, but the screws are too long. Did you replace the screws with something shorter? Any tips on a specific size?

[@sandys-channel]

if you're not crashing, you're not flying hard enough, lets see some Avata 2 crash compilations haha

[@dronarchy]

you mean to fly like those influetards technerds on KZbin? Naaa bro, this is the real drip.

[@sandys-channel]

@@dronarchy I meant more like your ladder dive video, pushing yourself to fly harder / better / progress. Not sure what you mean about influentard technerds, we're talking about quads on the internet, no qualms with being a technerd lol.

[@AnemosFPV]

The beat at the beginning is so sick, what song is that? Link please?

[@dronarchy]

@@AnemosFPV thanks for asking. Need to check the song name and artist. Got it from Artlist licensed music site.

[@AnemosFPV]

@@dronarchy Please do. If you have a deal with artist post the link so they know I'm coming from your channel

[@leobislig6190]

hey man. you are flying great with the avata2, what are your rates if you dont mind sharing? i’ve adapted mines to my best settings, but i still have the yaw tumble and i dont feel comfortable doing insane moves because of it. also seems heavy, meaning i would powerloop, but my quad would take a while for it to level out with full throttle. your feedback would be much appreciated. please help me

[@dronarchy]

@@leobislig6190 Hi Leo. Remember this is a heavy whoop and not engineered to fly like this. Of course I need to find its limits. Using 940° freestyle rates 👍

[@leobislig6190]

@@dronarchy i appreciate it, ill keep that in mind. ill try those rates

[@Xplicit_fpv]

Love my a2! Great rip! Witch props are thoes??

[@dronarchy]

thanks for asking. These are Avata1 props by HQ called DT 2.9x2.7x3. Must use shorter screws.

[@Xplicit_fpv]

@dronarchy awesome I'm all over this!✌️

[@andreachiuppi]

@@dronarchy I have these propellers, and also the Avata 1 screws, but the holes don't match, if you screw on one hole the other is slightly moved towards the edge. I mean the distance between the motor holes of Avata 1 and Avata 2.

[@lh1me]

How many hours of flight time would you say it would take before you begin to see these levels of control?

[@Leijanlennattaja]

What gimbal angle did you use sir?

[@dronarchy]

thanks for asking. Think I left it at 20 or 25.

[@cipri198zero]

I’m working hard to avoid prop wash . Would like to know the rates for Avata 1 for ripping, still learning and I won’t risk yet my A2 too much😅

[@dronarchy]

@@cipri198zero is not rates, it's finger dexterity. All drones will have some sort of prop wash on any abrupt move. Why? Because is physics. Unless you change air density and prop design. Just be mindful of your throttle during moves and fly more elegant(smooth). That will avoid propwash 👍

[@Adept1780]

Do you find the avata 2 has the death roll still or now you have changed the rates its sorted it? ta

[@dronarchy]

@@Adept1780 no deathrolls and I've been doing same tricks as my 5".

[@AMS_Dronez]

I stayed for the DNB😈

[@dronarchy]

DnB clips hit different 🔥🫶🔥

[@AMS_Dronez]

@@dronarchy disc golf too though 😎🤑

[@Adept1780]

Got a link to the props pal?

[@dronarchy]

@@Adept1780 Noow available at MyFPVStore, called HQ DT 2.9x2.7x3. Keep in mind you will need shorter screws!

[@SeeFPv-qm6ie]

What do you think about the dji ban

[@dronarchy]

still a joke, but people panic after all these years hearing the same nonsense.

[@harryskystone]

would you mind sharing your stick rates and expo?

[@dronarchy]

I have a video that shows all the settings, rates and remote control setup. Watch the Pro Ripper clip.

[@harryskystone]

@@dronarchy thanks a lot :)

[@omerkesk1n]

To what degree do you adjust the gimbal angle?

[@dronarchy]

depends if you want super aggro freestyle with 35°, or chillax cineflow with 20°.

[@omerkesk1n]

@@dronarchy What is the setting in this video?

[@luisamarales941]

How much time did you spend on the sim?😂

[@dronarchy]

@@luisamarales941 I hated sims for 3 years in a row. Till I found FPV Logic last year. Now do the math 😉

[@cgbyrobert]

​ Is there a profile that best approx the real avata 2 in it?

[@novax7176]

Where can I get those green Bumpers if I live in germany

[@dronarchy]

I heard that OriginalDobo is not shipping outside US. I'm sure someone will make a different bumper print soon enough.

[@novax7176]

@@dronarchy Thanks for your answer, there are several bumpers out there, but I dont know if its worth getting 1 from amazon randomly, maybe it is though idk

[@russfpv]

what is ur rates..why you didnt experience any yaw tumble?

[@dronarchy]

if it's a nasty change of axis then it can produce some wobbles. I'm ripping fast 940° rates and having a ton of fun so far 💯🫶

[@SeeFPv-qm6ie]

What are the sti files for the top 3d printed part if you don’t mind

[@dronarchy]

will notify everyone once is up for free download.

[@bgloulouful]

bonjour quel rate utiliser vous SVP MERCI

[@dronarchy]

real freestyle 940, cinerips 650.

[@psimmy73]

How can we get those parts?

[@dronarchy]

the bumper print is through @originaldobo , the top print cover is mine. Props HQ DT 2.9x2.7x3

[@Leijanlennattaja]

They claim that this size of propeller is not compatible with Avata 2. Only with Avata 1? Is this true? I mean there's no other additional modding needed?