DJI Goggles 2 | How to Unlock All Channels

[@GardoRotor]

Good clean and clear Video!!!! fun fact.... the Goggles 2 (when powered up) can access the SD card ( or any card) when connected to a PC via the USB c port. Comes in handy if you forget your card reader and have to dump footage.

[@MystikSquash]

Joshua Gibson here. Just ordered a set of these from you guys,to replace the original V1 Dji fpv I’ve been using sense they came out . I’m so excited for the upgrade.

[@stevetrixfpv]

No bs right to the point! love it. Pleas do one about fixing vistas with poor range,

[@redreefbud]

Just got a cinebot25 S and integra goggles that i may need this for 😁 great drone so far. Just cruised around the yard a bit 😉 got it yesterday. Thanks for the directions and file 😁

[@CarlosRodriguez-vg2ob]

Great video and it worked well. So here is a question from a TOTAL NOOB. now that I have done that, what do I choose? Is 20mhz better than 40? Which one should I pick, and after choosing one, do I leave it in whatever random channel, or do I need to select a specific one since it's now manual? and this question is for anyone one in the community as well

[@LenZFPV]

What a shame no one answered you.. same boat here.

[@CarlosRodriguez-vg2ob]

@@LenZFPV lol yeah I gave up waiting and I set it to 40. So far so good.

[@LenZFPV]

@@CarlosRodriguez-vg2ob I set it to auto and saw no difference. Which channel did you pick?

[@CarlosRodriguez-vg2ob]

@@LenZFPV channel 1 40hz

[@FpvOverAlaska]

I'm reading through the comments for this info to! Still none bummer 😕

[@Arri.]

JB has done this on the new Avata 2 and it works 💪 🎉

[@redBo1z]

11/02/2024 still working on DJI G2

[@hadiFPV]

If you have problems formatting the SD card within the goggles itself try this: Format the SD Card to exFat Format on Windows, afterwards format it within the goggles.

[@CoasterJoint]

Thanks so much!

[@rabin273]

hi do we leave it in manual mode or auto mode after the hack? no video explains what to do after fcc hack

[@turgut_krm]

it should be Auto mode

[@Chillin-fpv]

You can leave it in auto. But if you want to be on a specific channel use manual.

[@Hijo-del-Chico]

Hey friends. Is possibly work whit OSD in the Googles 2 of dji.. and betafligt? Is possibly or not? Is there a manual to follow? In the v2 version I see that there is an OSD in the glasses, and it can be compatible with Vista and others, but I am not sure in this case, I do not see any information, at least in my language, thanks

[@stefano_2]

Do I have to somehow "turn on" these channels also? Or after making sure they're dislayed in settings it means that my goggles just transmit further now?

[@Chillin-fpv]

Sweet thank you.

[@peachybeardshrek]

I have Mac. I went to Roto Riot clicked the link for the fcc download and it says error 404 on the page. Any suggestions other than find a pc?

[@Chillin-fpv]

Does this make the reception degrade? I just put the file on my sd card last night and just flew a couple packs. And the goggles reception got pretty low pretty fast in places where I would have 50mbps before. Before I put that on my my sd card for my goggles. I barley ever saw it move from 50mbps. Maybe its because i was still using auto and not manual set to a specific channel.

[@fawkyooo7377]

does the channel have to be reset each time you turn on the goggles?

[@taytayfpv]

it will stay in whatever channel you choose so each time you power on it on that channel already.

[@ΓιώργοςΚαλλίγερος-ι5ω]

worked for me ! thank you!

[@Mrbeans_and_chease]

when i click on the fcc bit on the website it says access blocked

[@DRONE-RIO]

Tanks

[@rotormasher]

How do you share the screen on the phone?

[@theinnocent714]

Will this work with firmware 01.09.0000? Tried this process but didnt work

[@junebugpetty7386]

I just tried it and it worked for me and I’m on the latest firmware

[@theinnocent714]

@@junebugpetty7386 i wonder why it worked for some doesnt for others. Had to buy ine thats unlocked n sold mine. Was driving me mad

[@timmytfpv7316]

stupid question do you have to leave the sd card in the goggles

[@Shreyash-X0x11]

no once its done its done then u can pull it back or delete the file from sdcard

[@TheGobopolice]

This does not work with the latest firmware update that enables the Mavic 3 pro series !!!

[@portrattlabbet]

I did this but now my channels are greyed out so i can´t even choose manual anymore. What did i do wrong? I´m on OSX when putting the file on the sd-card.

[@Chillin-fpv]

You have to have a quad powered up in order to access those settings

[@deltadrone]

It works for the o3 but then when I want to connect my dji avata my controller won't connect...

[@botchitong]

does it also work with the avata?

[@HeavyJams]

Does this not work anymore? I followed every step and I now have 3 channels, not 7. Is there an update to this guide?

[@benihamdani5871]

I have same problem too, are you ablr to solved it now ? I followed every single step at least 6 hours and didn't get anything 😂

[@evil.hamster-fpv]

On 40mhz or 20? On 40 must be 3

[@ctl6563]

@@benihamdani5871 did you unpack the file first? this held me back

[@HeavyJams]

@@evil.hamster-fpv on both frequencies

[@serenestateofbeing1062]

​@evil.hamster-fpv what's better for range? 20 or 40?

[@MountaineerFPV]

Hey LetsflyRC…..I love me some Ham

[@coolinthewoods]

Why can't I switch the channel mode from auto to manual??

[@dysisinfluence]

you have to connect the goggle with the airunit before you can switch modes I had the same issue

[@markhassing235]

In the settings the "channel mode" option is gray for me so I cant press it. how do i fix that

[@dailydronejourney]

hi, its same with me. do you have solve that issue ? What is your goggle type ? I'm using Goggle v2 not goggle 2. please advice

[@markhassing235]

@@dailydronejourney hi, yes i've found the problem and it was quite a stupid and simple one haha. The goggles must be connected to both the drone and controller and then the channel mode option is available so everything must be on and connected to eachother.

[@dailydronejourney]

@@markhassing235 haha, are you serrious ? I think I do stupid thing like you.. I just power on the goggle and drone, the controller is not..🤣 Ok, I Will try as your suggestion.. thanks for your reply

[@garyjohn1076]

Anyone know why my channal leds are not working? On the old V2 Goggles?

[@sur-ronrides]

tried it for integra goggles, didnt work

[@justreddog]

worked fine for my integras 20hz i have 7.

[@billionairerich2849]

THANK YOU!

[@AndersJ48]

If only it was that simple, first of all, what firmware are the goggles running on? i had to downgrade to 01.04.0000 to make it work on mine.

[@Chillin-fpv]

I'm on the latest firmware and it worked fine. But now I'm thinking my video signal got worse because of it.

[@Obijew]

I DID THAT on my Integra and I still don't have FCC unlocked =(

[@tommunhoz4513]

I Would like to know how to unlock channels 12,13 and 14 in 2.4ghz DJI mini 2

[@frankgiese4697]

Übertragung bleibt ausgegraut😢

[@thrust_fpv]

Does this hack work for goggles 3 please.

[@harrylode1]

This week I bought a Google 2 for my Mavic 3, but the flight distance was terrible. I tried the unlock as shown in the video, but without result The firmware V01.06.000 of my googles 2. Can anyone tell me what is doing wrong

[@dsj66u]

Hi what sd card aee you using in yours thanks

[@Hoby_Drones]

I can't download it

[@marvinjimenez5668]

it works on me..just now

[@billionairerich2849]

👍👍

[@thaikerfpv]

How did you have view on phone from the goggles.

[@kenwu324]

I have the same question

[@thaikerfpv]

@@kenwu324 it worked via OTG cable to Goggles and only when connected air unit, cant figured out how to get Goggles view feed to my phone , in example to watch Album ..without arming quad..