2 poles/w flags running you $500....I support the "Made in America" theme, but thats a steep price for flag poles...
@kbanghart4 жыл бұрын
Haha this is the perfect video for weak insecure white men.
@Jabooty_Williams4 жыл бұрын
@@kbanghart you good? Personally I think this is a good video for people who want to get a flag pole for the bed of their trucks to fly an american flag. Even if it is a bit expensive
@tryten94 жыл бұрын
@@Jabooty_Williams Its more than a bit expensive. I'll proudly make my own. Fly my black flags or red flags though.
@matt.squarebody54274 жыл бұрын
@@tryten9 yep, went to home Depot picked up a $4 steel pole cut it down to size and fixed some flags to it. Works just damn fine
@stinky_puppet51584 жыл бұрын
Well buy one from China then
@Sirk7 жыл бұрын
Good looking product. However, they can miss me with $199 price tag and drilling holes in my bed.
@butterybuttcheeks3 жыл бұрын
I'm not drilling shit in my bed I'm just gonna weld a pole holder with a screw hole at the bottom in the railing hole
@ricardoramirez483 жыл бұрын
😂😂on god
@GeminiS...2 жыл бұрын
I don't care about holes but damn $200?
@Nouheal6 жыл бұрын
I don't think I've ever seen some shoes that say "I don't actually work for a living but I want you to think I do" besides yours. Congrats.
@JH-kh9lf5 жыл бұрын
Oh and I wanted to say THANK YOU for flying our flag and taking pride in it when so many are tearing it down.
@kbanghart4 жыл бұрын
I'll step on it and burn it, is that ok?
@gregory9740 Жыл бұрын
That’s not our flag, that’s a military flag, we fly a American civil flag.
@j-swizzle19226 жыл бұрын
You know PVC is like $8 right?
@TattsnGuns4 жыл бұрын
You know pvc breaks after 40 mph, right?
@kbanghart4 жыл бұрын
@@TattsnGuns shh, let the idiots spend all their money on these stupid poles and flags 😂😂😂
@JpradoV104 жыл бұрын
I’ve drove with pvc flags at 80mph and never had a problem
@LIBERTY0RDEATH3 жыл бұрын
@@JpradoV10 ya with the flag damn near touching the ground. PVC isn’t strong enough. You get what you pays for.
@JpradoV103 жыл бұрын
@@LIBERTY0RDEATH as long as you find a decent way to mount it you should be fine got rid of the pvc eventually to get metal poles but it never bent or anything and they were 5 1/2ft pvc poles
@Rod73554 жыл бұрын
Great video also what you can do to preserve your flag or to make it last longer would be the ad clear silicone on the outside edge on both sides of the flag covering the seems and let set over night to extend the life so it doesn’t start ripping to early
@dfw_fpis76557 жыл бұрын
I like the video before I even watch it, that's how great he and his content is. Keep up the great work, 'Work for it'.
@MoloneLabe7 жыл бұрын
_Emergency_Services_ I agree he puts out good content and I'm a hard worker as is but he drives me and motivates me even more.
@saltwaterrook46387 жыл бұрын
Yea I was really excited. I've spent last couple of days looking for the perfect flag poles. Thought we had a winner until I saw that price. $400 for two poles? Yea, no.
@CarterLayne3 жыл бұрын
what i do is get 6 ft steel poles and drill holes and put eye hook though then a d ring and BAM, Just a Durable
@antnope30422 жыл бұрын
Get your money up stop complaining
@saltwaterrook46382 жыл бұрын
@@antnope3042 well into six figures chump. I could but your whole life in less than a year. Doesn't mean I'm into wasting it. There's nothing about this to justify the cost.
@MxPlaysGames7 жыл бұрын
I've been looking for poles for a while thanks for uploading this!
@ZombieApocalpyse7 жыл бұрын
199 is a little steep for a flag pole, but it does look pretty thick. i guess its give and take, want it cheap its not ganna be as strong
@DMAXRYNO7 жыл бұрын
It matches the show quality parts a lot of people are putting onto their trucks. The cnc'd billet clamps, hardware and spike alone would be worth it.
@outdooradventures10627 жыл бұрын
DMAXRYNO I'm Hilly Clinton, and this is my White House. I work here with my old man and my son, Bernie Sanders. Everything in here has a private email server and 30 missing emails. One thing I've learned after 21 years - you never know how many emails you can lose
@austinharden8997 жыл бұрын
I love your truck and videos! I love what you stand for! Keep up the good work, and always WORK FOR IT!
@mattlane22827 жыл бұрын
Each time he drilled he hit the back of the cab...
@EpilepsyWarning5 жыл бұрын
Potential spot for rust now
@gardentractors31024 жыл бұрын
For rear all’s I heard was a Big Bang and I said yep there’s the cab
@kbanghart4 жыл бұрын
Lol when I see these stupid flags and poles I like to rip them off
@tageerickson5814 жыл бұрын
Plen122 piece of shit disrespecting other peoples stuff
@kbanghart4 жыл бұрын
@@tageerickson581 oh don't get yourself all worked up about it, people like you get mad at the tiniest things anyway. Like being asked to wear a mask.
@securenc14 жыл бұрын
UPDATE: I've been using the Speedpole branded product for a year now and have some comments to share. The billeted aluminum poles look really nice, but they have design flaws. Here are the issues I found: 1. The threads on each pole cap that connect the poles together are too short. In other words... there's not enough threads to stabilize the top and bottom poles. This allows the top pole to move even when tightened with all the force I had applied. I believe by adding another inch of threads would completely solve the issue as well as making the flag poles much stronger. 2. The small black rotating inserts that fit between the upper and lower poles and connect into the flag eyelets are too tight to turn freely once I tighten the poles together. This does not work as advertised. 3. Customer Service could be better. Summary - Speedpole is on the right track to make a quality product, but they have to keep improving and correcting the issues that their customers (me) are pointing out. With tax, I paid roughly $230 for my flag pole and expect a QUALITY product... nothing less. Lastly... don't send Speedpole a message on their website Contact page - they don't respond back. Maybe I should've called instead. But, why have a contact page on the website if they not gonna monitor it??? I've decided to pull out Speedpole's flag pole that I purchased and make a CNC machined flag pole that will fit into my B&W Gooseneck receiver. It will be super strong, reliable, convenient... and most importantly - I won't have to keep looking into my rearview mirror wondering if the top half of my Speedpole has finally broken off and gone. Wish I had my $230 back!!!
@CLCHD7 жыл бұрын
That's bad ass, can't wait to get one myself!!!! Keep up the awesome videos!!🇺🇸
@royalmodeys51086 жыл бұрын
CLC 2500HD nice truck
@TheCaliforniareef4 жыл бұрын
Just bought the 2020 GMC Denali Dually in white, purchased two of these polls and three different flags and I am glad to support made in the USA 🇺🇸 companies 👍🏼.
@jake98317 жыл бұрын
I just bought 4 u-bolts and a 10 foot 3/4 inch steel pipe and made my own kit, I guarantee it will last longer than that kit and it only cost $20 all together
@Joshua.Muenchow7 жыл бұрын
200$ lol I got a piece of scrap pole and 4$ u clamps from Home Depot and screwed them into my headache rack and it's been fine for years sorry but it's gonna be hard to sell this to me lol.
@DMAXRYNO4 жыл бұрын
Joshua Muenchow if that’s the look you enjoy, these aren’t for you.
@JerseyToTheBone4 жыл бұрын
For me, it's just about the drilling into the bed of a 60k brand new truck. Possibly ruining the integrity of the cab.
@TestDriveRacing4 жыл бұрын
@@JerseyToTheBone So I made a set with no drilling into the truck for about $100, lights and all. kzbin.info/www/bejne/rmiYeqB5eJyDd5I
@notacop_yt7 жыл бұрын
Who else cringes every time they drilled through the bed and you can hear it hit the other side???
@throttleoverload13015 жыл бұрын
High Diamond yes 😢 i felt it in the soul
@TheEdgar7075 жыл бұрын
He literally damaged the cab... I definitely wouldn’t do this on my 2019 high country.
@james1939-s1c5 жыл бұрын
@@TheEdgar707 well on the good side, the cab will have rust holes to match the bed.
@stinky_puppet51584 жыл бұрын
Edgar Reyes I did it to my 2019 Colorado and love it
@JerseyToTheBone4 жыл бұрын
Yeah not simple nor the best method.. I prefer the hitch version. I mean if someone can come up with a non-drill version, Then I'll consider it!
@Big_T_Travis5 жыл бұрын
$200 is insane!!! Could easily recreate that for $50
@jogmas125 жыл бұрын
Big_T_1987 Travis why u fly flag on your truck?
@jogmas125 жыл бұрын
Billy Hargrove that’s no way to be patriotic, it’s silly billy is what it is. It more like they making a political statement like “USA, love it or leave it “ or “this is the USA, not Mexico, so go back where you came from” that kind of in your face political kind of thing. Or probably they pro trump so their way of saying “MAGA trump 2020” to all the liberals and Democrats
@jogmas125 жыл бұрын
Billy Hargrove well ok, that’s good but this is the USA and things are a little twisted here.
@jogmas125 жыл бұрын
Billy Hargrove thanks, that’s gotta be the best response to a comment I could ever put here.
@stinky_puppet51584 жыл бұрын
TheGP how is it a political statement supporting your country? I bet your a liberal Obama supporter who hates America. I just recently bought mine and don’t give a fuck what you think. If you don’t like seeing the American flag you need to get the fuck out
@knightryderbelow7 жыл бұрын
199? Can we get a discount code?
@carlosenrique14275 жыл бұрын
knightryderbelow 6.7LIME
@KM16SR127 жыл бұрын
Ouch! looks like he hit your cab when he drilled through. Nice set up though
@DMAXRYNO7 жыл бұрын
Cab is all good! Just looked like that.
@TeamWagy7 жыл бұрын
That's what I was about to comment lol I cringed pretty hard
@mikecrittenden4647 жыл бұрын
KM16SR12 you me and a few others were thinking the same thing that guy should either tape up his bit to the right depth or send a bit with some kind of adjustable depth bit in the kit because if that scratch the cab you gonna have a good starting point for rust hell maybe even put some sylicone on the drilled holes.
@ethancox76707 жыл бұрын
momo12_94 same
@eder4yamaha7987 жыл бұрын
Nothing beats "Made in USA" nice poles
@DMAXRYNO7 жыл бұрын
Can't beat the quality!
@chrisrandall63064 жыл бұрын
Was going to order one until he said $199😂
@CarterLayne3 жыл бұрын
Same. I could Custom Fab one for 50. XD
@adrianpinedo73837 жыл бұрын
You should make workforit flags
@texaschevys12297 жыл бұрын
Dam I was like holy shit buying 2 but the 200 price ..... Nevermind
@MrAnimefox5 жыл бұрын
I'm going to stick with fanpole. Good looking, detailed(I take it to car shows and since it's black it looks awesome on my white truck), durable(personally tested going 70 to 80 for a whole day and no sign of damage while flying 4x6 flag), now you can run up to 3 flags as of a few days ago, you can fly any size flag you want, just a pull of a pin you can take the pole off, made in America, and the biggest thing is no drilling involved. Though flagtruck has a 4 flag setup. Plus it's the only flag mount you can customize, and they're powder coated. Though I am ify about conduct poles as flag poles.
@vict1236547 жыл бұрын
Hell ya brother been waiting on this video man the flags looks good on the truck awesome setup #workforit #usa keep up the great work.
@nolaw47406 жыл бұрын
I like it. Probably has already been mentioned, touch up the drilled holes with primer and paint ( unless you like rust ), and use some type of spacer on the drill bit so you only go through the bed and not hit the cab......a wood dowel cut to the proper length would work. Thanks for sharing, peace out.
@james1939-s1c5 жыл бұрын
Well at least the cab will have rust holes to match the bed. Anytime you drill metal you have to primer and paint the metal, or it will rust over time.
@1988joshkimbrell7 жыл бұрын
I love what this guys doin but 200$ does seem a little high.. But its whatever i drive a bmw so im not his target customer anyway lol.
@trials_bike-xu3xf7 жыл бұрын
I just did a couple pvc pipes on the sides in the back where they got put on the black truck and found a couple steel poles at my uncles auto shop and cut them to size and I use zip ties to hold the flags on the poles. Overall probably spent $40-$50 because the first flags I got came with a wood pole but if I would've known about the steel poles before hand I would've only spent about $3 for the 10 foot pvc pipe with about 6-8 feet left over, and the money for all the flags.
@securenc15 жыл бұрын
Everybody seems to be complaining about this guys price and wanting a cheaper solution, just remember the golden rule guys... YOU GET WHAT YOU PAY FOR!!! He could've made basic aluminum poles with minimal detail, but instead, he elected to make them nice with flag toppers, and 360 degree flag connectors, etc.. and those details add to the bottom line when making the poles. It's that level of detail that will make these poles more popular over time.
@atvrepairsandmore24827 жыл бұрын
looks good only problem I see is for people l Ike me that run bed covers. a receiver hitch version would be awesome
@TestDriveRacing4 жыл бұрын
I know your post is old, but I made a set that attaches to the pop-up anchors on the bed rail (Bull Rings), so I can keep my cover on, no drilling, quick detach, and has lights for at night... all for less than $100
@TestDriveRacing4 жыл бұрын
kzbin.info/www/bejne/rmiYeqB5eJyDd5I
@Rhec223 жыл бұрын
I might not be working in construction but I've been working in Asphalt since I was 16 just chasing that american dream now I have a 2007 silverado on a 4" lift lvl kit and 33" tire 20" rims all bought and paid for by myself so I think I'm doing pretty good for my age lol
@crxmovies197 жыл бұрын
the beginning of the movie is so sick, I want to go paint my roof black now
@mikeprintz93586 жыл бұрын
1" round gas pipe, 1" square steel, 2 flag eyelets, 3 bolts, washers, 3 nuts, reducer and bolt that fits inside hole located in center of rail hole. Mounts inside your rail holes on top of truck and secured with the existing hole there inside your truck bed. No drilling of your truck. Total cost $15.00...Remove single bolt from inside your bed and everything can be removed...perfect set-up if you have a tonneau cover.
@irishassasin110 ай бұрын
i’ve had a $60 dollar carbon fiber pole last me two years now and that highway speeds quite often i think i’ll stick to my set up ty
@reallyfiji92177 жыл бұрын
Ordering a white one this week. Cannot wait
@georgereynolds51077 жыл бұрын
They should use this as their sales demonstration video! Might have to grab this for my next truck, fuckin sweet!
@joshuacripe15147 жыл бұрын
With shipping an tax for 2 about 550.00.....ouch
@mattrude54607 жыл бұрын
The Flag poles are $199 ea and depending on where you live there might be no tax and i think they're doing free shipping.
@richbuff5286 жыл бұрын
Where is the best place to buy American and military flags, for outside truck display??
@KevinBruceRoy3162 ай бұрын
“Why are you sweating” lmao 🤣 sounds like something id say to my buddies
@chrishunt20466 жыл бұрын
Glad I seen your video on Speed Pole,just ordered mine in time for Mardi Gras!!!
@Freshknight74 жыл бұрын
I’ve been looking for something like this! Made in America?!? I’m sold.
@prashvv4 жыл бұрын
Thanks for the video. This is very helpful. Can you elaborate on how well it has performed after a few highway drives at high speeds? Thank you.
@noahwhitaker9096 жыл бұрын
I'm just a hick from leroy, michigan I bought a 8 dollar flag a 30 dollar mount and a 80 dollar pole , I drilled and mounted my shit and drive it at anywhere from 50 to 75 on back roads and it still holds up .
@impressfully3277 жыл бұрын
I have a truck and want to run two flags. American flag and Thin Blue line flag. But dont know where to get a Blue lined flag of good quality any help would be appreciated. BTW i love your truck.
@redneckfirefighter13737 жыл бұрын
Impressfully G128 - Thin Blue Line Embroidered 210D Oxford Nylon U.S. American Flag 3X5 FT Brass Grommets Honoring Men and Women of Law Enforcement Black White and Blue US Flag www.amazon.com/dp/B01MXCYNKL/ref=cm_sw_r_cp_api_YQfJzbPKZ9RN8
@redneckfirefighter13737 жыл бұрын
I have 2 of their flags one thin blue line American flag and the other one is the thin red line American flag and they are both well made and stitched well being affordable
@TheViedocrasher4 жыл бұрын
Y’all can go get a 10ft stick of 1/2in rigid conduit for like $15 for strength and boom 🤯
@tomscobra20037 жыл бұрын
what size flag are you running?
@elijahcrome56082 жыл бұрын
I welded flagpole mounts for my truck, bought 2 strong poles and 2 flags for less than 75
@coreydickey36576 жыл бұрын
How did these end up working out for you? Would they hand 9 hour trips at 80mph? Gf had a similar design pole for her home that kept breaking at the joint. Also bend your bed at all?
@lukeearnhardt93607 жыл бұрын
Definitely getting 1 maybe 2
@rubiconoutdoors34922 жыл бұрын
Are they robust enough to double as an anti protester beatin stick ?
@DMAXRYNO2 жыл бұрын
You didn’t hear it from me, but definitely.
@DylansDIYWorkshop2 жыл бұрын
lol
@FilosefeAbstrac4 жыл бұрын
I assume If I have a decked installed I could just install it between the width of the decked storage unit right? Or would it compromise the strength of the billets?
@sauceygocrazy39327 жыл бұрын
New to the channel I love the content! I always wanted a lifted truck🤘🏾 keep grinding bro & keep posting
@Tyronejames527 жыл бұрын
It did but he had to take it Down and ryno truck looks amazing as always keep up the great work and the vids are awesome
@devonrose99843 жыл бұрын
Late but if y’all want a cheap alternative you can get a 3/4 inch pipe from Home Depot and slide that inside the original flag pole
@teamecho54463 жыл бұрын
Have you had any issues with the flag loops working their way out of the metal loop even though the metal loop is curved
@leeadipentino4 жыл бұрын
I no longer see a link on Speed Pole's site for flags. Where did you get that flag with the extra stitching at the end?
@KristiLEvans14 жыл бұрын
Really nice set-up. I’m too poor. Mine is a working, plow truck. Looks like I washed it with a garden rake. I’ll have to jury rig my own crap. #ShitboxLife
@mrbakerjjim7 жыл бұрын
needs some kind of mount for trucks with covers
@TestDriveRacing4 жыл бұрын
I made a set myself. Here ya go: kzbin.info/www/bejne/rmiYeqB5eJyDd5I
@stinky_puppet51584 жыл бұрын
I bought mine on eBay for $35. Let’s start an American flag movement
@jacobmeyer82916 жыл бұрын
Hey so I got a flag pole and mount for my truck. What materiel would hold up the best in terms of flags to keep the flag from shredding on the highway
@rat1603 жыл бұрын
I have been looking for an option that would work with my flat tonneau cover but no luck other than stake holes. I prefer the flag closer to the cab. So I see this and am willing to take the tonneau cover off but with my plan to fly 2 I'm lost at that price as well... appreciate the craftsmanship but with losing my covers drilling holes in the bed and $400 for two flag mounts, I'm out unfortunately
@Monuments_to_Good_Intentions4 жыл бұрын
Thanks for the video. Nice to see options. But $200 is a no go for me. I will have to make my own for my new YeeYee flag. I will just use some 1” black pipe. Or find some scrap metal laying around that can handle the high way speeds.
@rykerrowland16537 жыл бұрын
@dmaxryno where did you get your 30ft flag pole for your trailer hitch?
@warrenwallace24 жыл бұрын
Would he make a Dimond back bed cover mount to bolt to the existing tie down holes just look at a Dimond back bed cover it has 2 tie downs in the front one on each side that can be used to bolt down a strip of metal with the flag pole tubing welded to the metal strip
@Godaboveall24_75 жыл бұрын
This was Iraq motivated. They gave us this idea. Good shit!
@marcuskoenig79255 жыл бұрын
How well did those flags hold up? And where can i buy them?
@jamescarballo6334 жыл бұрын
I’ve gone 70 but I believe they are rated for 65 and you can buy it on speed pole.com
@joshluke71477 жыл бұрын
Hey Ryan please for the love of your truck finish putting bedliner on your tailgate! It look horrible without it!
@DMAXRYNO7 жыл бұрын
Josh Luke Haha you don't like the black and white theme?! I know I know. I need to get it in one of these days. It's only been over a year 😬
@YoutubeStakeHolder2 жыл бұрын
#LetsGoBrandon This is probably one of the best educational videos I've seen for these types of things! Thank you young sir
@akathedude32662 жыл бұрын
have a Gen-y hitch and the 2' works great. this would be ok too..
@supercrossedup28737 жыл бұрын
WORKFORIT!!
@theBOBisbeastly7 жыл бұрын
I spend about $35 on a good made in the USA America flag but everyone the top red stripe has come unstitched from the white stripe below it. But the ends never tattered to bad. But for the price of the nylon ones i found it better to buy tons of those for the price of one flag, because flying a double set up eats up flags.
@bryandehart6705 жыл бұрын
How not to get laid, act like these 2 douchenozzles.
@jasonkrohn54164 жыл бұрын
Well you had me till 200 bucks and drilling holes in the bed of my truck is a no go for me. It is a cool looking product but that’s a lot of money. I’m gonna try to find a way to mount one to my hitch, there was a guy driving around my town with one like that.
@casper24ism7 жыл бұрын
Sooo that's about 550 for 2 flags? Kinda high
@bubba-j-usa48157 жыл бұрын
Right ?! even 199$ for 1 is crazy i can make a solid one for way cheaper and same set up
@jonathanfreedom1st4 жыл бұрын
I have a 6x12 foot flag that flew over the Capitol building in Washington d.c....does he make a pole setup for that size flag?
@mattmuthard14176 жыл бұрын
It’s there any way just to get the pole and mount it with the hitch instead of drilling into the truck?
@jonathanfreedom1st4 жыл бұрын
When will someone finally design a flag pole setup that uses the Bed rail anchors for lands sake. I'm not a believer in drilling holes and having that many peices . Overkill.
@prestoncooper95307 жыл бұрын
You should mention to Chris that he should either color match his gmc emblem or have it color matched to his wheels
@DMAXRYNO7 жыл бұрын
I do every day. Waiting for him to listen!
@tink08017 жыл бұрын
What do you do for a living
@Choppylee226 жыл бұрын
is it better to mount the flag in the for the bed or the back of the bed
@proudcanuck4 жыл бұрын
Hey I know this video has been up for a while now. But do they ship to Canada 🇨🇦? Love your videos man! Keep up the work!🤘
@jasongoff68727 жыл бұрын
Were you in chino/Ontario yesterday?
@jeffwitt5629 Жыл бұрын
Is a 3x5 the only size flag you can fly with these?
@02to06TUNDRAFAN7 жыл бұрын
Well now there is another thing I want. I'm just going to have to WORK FOR IT 🙄
@RecklessSavage7 жыл бұрын
I hate to be a Debbie down and what not but I bet that impact of the drill bit to the back of your cab left a mark ? I know its not seeable but Its a potention rust spot now ? just saying man you probably don't care but he made good imparct
@WDWRLD4 жыл бұрын
So the poles are great but the customer service is non existant. Ordered one pole last april or so then wanted a secont in December. Emailed to make sure I ordered the exact same pole....no reply. New pole comes in and while the mounting blocks are the same the threaded parts are longer which makes the poles look completely uneven. The new pole also when screwed together wobbles some where as first pole does not. Again, emailed him to ask if there was any way to correct this.....and again no reply. Im on the east coast so I see almost no one else running them out here near the OBX, people ask all the time about them and I tell them how it is......so its a decent product but dont expect any help if theres a issue.
@haasformulaonefan97955 жыл бұрын
Why don't people make a threaded post for flags to mount on the boat hitch?
@peggyschulte92295 жыл бұрын
Do you have something that will fit a truck that has a bed hard cover?
@fifamaniac044 жыл бұрын
Otay Ranch! Woot woot!
@brandleeshadden59136 жыл бұрын
$199 for the pole plus a flag and I get to install. Dang. That sounds like a great deal. You could get a Broom pole for 5 bucks!!!
@rcacase4 жыл бұрын
Hey guys great vid. i'm in the market for new truck wheels.can u tell me where u got those gold wheels?
@retrowolf17764 жыл бұрын
How do you protect a flag from fraying while being flown on the back of a truck?
@JT-gh9hi5 жыл бұрын
Otay Lake reservoir, San Diego baby!!! Represent!
@kadenmaguglin3927 жыл бұрын
Sick this will help me mount my two flags
@CraigDAL124 жыл бұрын
I'm considering that flag you mentioned in the video. How well did it end up holding up?
@DMAXRYNO4 жыл бұрын
My current set I've had for 4 years with multiple 2 hour trips at 90mph average speeds and they have held up great! Well worth the money considering how many cheap ones you'll go through in the same time frame.
@jnorman19864 жыл бұрын
@@DMAXRYNO I just bought a flag from the link in the description.. $70 for the 3'x5' USA 🇺🇸 flag, extra thick for longer life, including shipping..
@throttleoverload13015 жыл бұрын
Hopefully his uhoh didnt mess with business. Great flags/flagpoles
@JH-kh9lf5 жыл бұрын
I run an American Flag and one other usually the Yellow Gadsdon Flag "Don't Tread on Me". Or sometimes the Trump "Make America Great Again" flag if I'm in Portland Oregon.
@kbanghart4 жыл бұрын
You "run" them? LMAO you sound insecure if you have to fly a flag everywhere you go.
@Benhamin20024 жыл бұрын
Plen122 facts
@Ajdero5 Жыл бұрын
I just was looking up flag mount vids just for ideas and holy moly you look like a kid, prob the beard not there but damn