DODGE CHARGER 3.6 V6 SPARK PLUGS REPLACEMENT REMOVAL, SPARK PLUGS TORQUE SPECS, SPARK PLUGS GAP

[@AutoRepairGuys]

Products that we use and recommend: ► Spark Plugs: amzn.to/3OBrqsm ► Spark Plugs Gap Tool: amzn.to/3AEi77F ► Torque Wrench: amzn.to/3NW7Iaj ► Liqui Moly Engine Flush: amzn.to/3NTzQuU ► Liqui Moly Oil Saver: amzn.to/3nR8bju ► This is Our Favorite Scanner: amzn.to/3Rlmr1A ► 5W-20 Oil: amzn.to/3uc1Qmu ► Oil Filter: amzn.to/3HZ9eHm ► We buy our Tools and Parts from here: www.amazon.com/shop/worldmechanics

[@shotgun486]

i looked on amazon and couldn't find anything for the spark plugs n stuff

[@shakibasghary]

Awesome step by step video and good camera angles. Even beginners could do this job with this video

[@ii-molon-labe-ii6814]

Do I drop my tool before or after I disconnect the hose? XD

[@rickflair747]

BRA THANK YOU SO MUCH FOR BREAKING THIS ALL THE WAY DOWN TO SUPER EASY INSTRUCTIONS GREAT CAMERA AND ALL ME AND MY DAD GOT THE JOB DONE. I SUBCRIIIIBED AND LIKED THE VIDEO!!!!!!

[@Theoneking1469]

Good video! Very easy to understand

[@HandyMan657]

They sure don't take the home mech in mind when designing these things anymore. Thanks for the knowledge guys. This helped greatly

[@leereyes3259]

Japanese Engines seem to be easier to work with. I find it dissapointing how American engines were designed to make working on it time consuming and complicated.

[@joeyppppppp2]

You've obviously never had a V6 Mitsubishi eclipse

[@jasonfelt305]

Exactly 🇯🇵❌❌❌

[@KeffMiller]

Lmao, you clearly have no actual experience working on multiple cars.

[@nohatn]

3000gt vr go try

[@bruceguillory6953]

Complicated bring profit all for business, labor and parts

[@calistarofficial1695]

What is that hose he disconnects at 2:14?

[@raymondbarcik2593]

I’m glad I don’t work on cars anymore, what a pain in the dupa. Great Video!

[@manuelrivera7864]

Big thanks for the full break down, your video helped tremendously my guy

[@Missmars08]

Wow didn’t know that could be the cause I had tried changing the fuel pump but it seemed to still shake when reaching over 40mph or just staying still Thankyou!!

[@mattmarshall1705]

Yo was this video helpful

[@cornflaker22]

What’s the gasket called that we replace after taking off the upper intake?

[@m.s.graves1441]

Upper intake plenum gaskets

[@Bestgameplayer10]

Did a spark plug replacement on an '02 Honda Accord and it was a piece of cake. This is some bullsh*t.

[@jacobskitchen9958]

Hey guys! I got a P0304 code and I replaced my ignition coil and my spark plug what should be my next step? Please let me know if you have anything!

[@vondaplug9514]

Fuel injectors

[@PMraz]

@@vondaplug9514 I am running into the issue where cylinder 4 is still misfiring. I have changed the spark plug, the coil and the fuel injector. The car runs fine for about a day and then it starts to misfire again from cylinder 4. When I pull out the spark from cylinder 4 it is covered in gasoline causing the tip of the spark plug to be black. Any suggestions on how to fix the problem?

[@deleted6343]

when should i change my spark plugs i have a 2019 charger gt got it brand new in 2019 it has 65k miles

[@finesse105]

at least got another 10k miles i got a 2018 charger Gt plus at 69k rn about to change sparks and coils , if you feel weird idle or slight misfire when accelerating probably need some new spark plugs for sure

[@geehampton9363]

Thanks for this video just what I needed to do. Was told I blew a gasket which is why my engine shakes but only code came up was #2 misfire so I was like f that after research I'll take care of this myself

[@noerangel4861]

That’s crazy this is the exact same thing that’s happened to my charge

[@jesusbarrios5095]

Appreciate it mine was the same way

[@kyleschmitz6240]

I just scanned my car and it said #2 misfire as well. Should I do spark plugs and go from there?

[@geehampton9363]

@@kyleschmitz6240 The Main reason for the misfire in my case was bad ignition coil on my#2. At first I was going to change both the spark plug and ignition coil but was told I shouldn't replace only one spark plug if I was going to replace spark plugs do them all at once time since they burn together. So I only tried ignition coil first which did the job. If you can do all spark plugs and ignition coils at the same time that would be great maybe time for full tune up anyway if it's been a while

[@sikopataduarte6886]

Thank you so much❤ i did it🎉

[@chinocc1128]

For the bolt in the back that you used the 13mm wrench for did it also have a plastic that went over it that’s connected to lines 4:19

[@youngjay5358]

Yes

[@maxhandy6349]

Thank you sir for video

[@PMraz]

I am running into the issue where cylinder 4 is still misfiring. I have changed the spark plug, the coil and the fuel injector. The car runs fine for about a day and then it starts to misfire again. When I pull out the spark from cylinder 4 it is covered in gasoline causing the tip of the spark plug to be black. Any suggestions onn how to fix the problem?

[@keenansimmons7695]

Did you figure out the issue? Mine is doing the same thing.

[@charlescook2385]

Head gasket

[@PMraz]

@@charlescook2385 Indeed it was

[@nestorlozano8302]

Do you have to drain any fluids?

[@manuelmendoza594]

How long do you take to do that job

[@NewsOrSomething]

That’s too much work . I don’t know why they make it so complicated now .

[@devinsmith2049]

Future reference don’t click the torque wrench 4 times ur over torquing it

[@TheXxdarkangel10xx]

He was loosen it back and forth in the torque. Not sure why they did that going back and forth to show the click, he should of stopped and first click to remove confusion.

[@jonathanreveles4675]

What the fuck is that tool he’s using at 3:30

[@TheXxdarkangel10xx]

Clip removal tool.

[@dr.degenerate-gainz2454]

Damn my roommate needs help I was like no problem bc I own a mercedes and have done all maintenance. This is so extra of dodge. Bad design

[@EmoDetective-e2m]

bro barrly speak english but droppin videos

[@JohnRangel-if2qm]

lol but his videos seem to be the only ones that shows the procedures clearly. Most channels people trying to hold the camera and do stuff while shaking the camera all over the place

[@julisatorres1502]

I stopped 8 sec into video

[@TheXxdarkangel10xx]

Yea same, weird intro. Scaring mfs right off the start. 🤣🤣 Not as complicated, just need to spend time/money buying right parts and tools like torque wrench, gap tool, plastic gasket for intake and spark plug and coil. Remove intake bolts in the pattern he did or look up the parttern and re install pattern as well, he mention warping on the plastic intake it could happen so torque the specs and install in the pattern. Ohh and do it when engine is absolutely cold like early in the morning. Sounds hard but it's simple.

[@TheAdjuster1]

only 3:30 in to the video....yeah fuck this. i'll just take it to someone and pay the money. My time is worth more an hour than the 500$ they'll charge me. thx for the video though.

[@fabiansalas9475]

Same bro 😂😢 I usually give it a shot but is too much just to get to the spark plugs