Dodge Dakota WINDOW MOTOR Regulator ASSEMBLE replacement

This video is how to on how to replace a window motor regulator assemble on a Dodge Dakota, instructions are specific and easy to follow. Hope this helps a few of you out. Thanks for watching!!
Previous Videos:
• How to build TRAILER F...
• Retro MOPED ... will i...
• RETRO Moped ... Will i...
#windowmotor #dodgedakota #diy

[@jamesholmberg7080]

You make it look easy. I'll reserve an entire day for mine.

[@kentuckyyankee]

They are not bad, you won't have any problems

[@isaacgriffith2388]

amazing 10 out of 10 one of the best how to fix videos I've ever had the pleasure of watching

[@kentuckyyankee]

Thanks!

[@EricTheOld]

Bless you 3 times. Thank you. My old 04 is still kicking and I'll order a regulator from rock island and stuff it in thanks to you

[@kentuckyyankee]

Thanks you're very welcome!

[@jamessayen8915]

Life saver indeed. Did just what you told me to do. Bingo Bango, worked like a charm. Excellent. Thanks much👍🏼

[@kentuckyyankee]

You are very welcome!

[@sidneydavidulrey453]

Thank you. You actually took the time to show and explain the steps involved. That's what the average schmuck like me needs.

[@kentuckyyankee]

😂😂 Glad to hear it!

[@sidneydavidulrey453]

@@kentuckyyankee did the regulator on mine today, looks exactly like yours. Lol. Piece of cake after watching your video. I've never done one before.

[@kentuckyyankee]

@@sidneydavidulrey453 That's great glad to help!

[@terrypope4656]

Great job ! You are a very good instructor. Keep up the good work!

[@kentuckyyankee]

Thank you!

[@brownwrench]

Lol Turns out the 3 were WIRED up by the previous owner! Job was easy to do and now I am expert on the subject.

[@CursingBear]

Thank You!! I Needed this Video!! Merry Christmas!!

[@kentuckyyankee]

You're Welcome, Merry Christmas!

[@FBCMountCarmel]

Thank you! I might mention that the door handle and door lever screws were torx. Also the bottom screws in the door are tough on a fat old man.

[@kentuckyyankee]

😂😂

[@Ron-nz5lp]

Excellent video! $400 repair quote to fix my 03 Dakota SLT driver’s window cost me $35 for the new regulator assembly. Especially liked the tips to remove the speaker, just 4 screws and lube the window channels while it was disassembled. Total time 1.5 hours taking my good old time. 12 out of 10 in my book. Now gotta see if KY has a video on changing the heater core. That’s a big job but at $750 quote I want to try it. You’re the best. Thanks!

[@marioortega7218]

Hey, man... THANK YOU! This totally saved me some time, blood, cursing, and beer money! :P Great step-by-step tutorial. I'm'ma gonna subscribe!

[@kentuckyyankee]

Thank you!

[@jeffreaver4451]

Awesome video. Thank you.

[@kentuckyyankee]

You're Welcome!

[@jtdefender]

Excellent video sir...one of the best productions I have ever seen....not to mention the detail with which you presented the processes and procedures. Thanks again!

[@kentuckyyankee]

Thank you!

[@nonbizpaul]

Excellent instructional video. I too have changed the exact same part out before, but this was so helpful in reminding me how to do it. Thank you.

[@kentuckyyankee]

Thanks for watching!

[@yessirthatsright]

Awesome video! Thank you! Exactly what I needed!

[@Ray00069]

I love your video. It’s so entertaining and informative. Thanks for taking the time and uploading this. God bless you brother! 🇺🇸

[@kentuckyyankee]

Thank you for watching!

[@JohnHenryEdenUSA]

Just thought it might be worth mentioning that it appears this style regulator is in the quad cabs, if you've got the standard or cub (extended cab) on a 2 door model it's got a scissor lift type in there. I saw this vid and at that first quick glance, I went yeah that's how my the front of my truck and door panel looks, but once I opened it up surprised to find something else. Removing the panel is the same, but past that it's different inside the door.

[@tylerm4709]

Did you ever find a video that helped you? I’m in the same boat

[@JohnHenryEdenUSA]

@@tylerm4709 I did not find anyone making a video on it. On mine, since I had opened it up I noticed that the motor was making sound like it was trying to work. It was just the gear and teeth were kind of locked up so I just sprayed it with some oil and gave everything a little twist with my hand to free it up and it's been working fine since. Maybe that will help you too.

[@stevechandler296]

Excellent! I think you probably saved me a few hundred dollars from having the dealer do this. Thanks.

[@deoblo85]

Thanks !!! you made it looks so easy I'm going to fix mine myself ! thanks !

[@kentuckyyankee]

You're Welcome good luck!

[@cactusstudiossouth]

HELLO KY! Just finished watching a video I have to do the same exact job. on my 2001 Dodge Dakota Passanger Door Side! I have a new Window Regulator that a friend gave me but I'm not sure if this one is correct! Can you tell me, the part number is 1AWRG00570

[@AlexZander688]

Right on! thanks for the video. My front passenger window regulator gave out. Going to attempt this repair tomorrow.

[@kentuckyyankee]

Good luck!

[@AlexZander688]

Got it done.👍 The old regulator's cable snapped at the plastic retainer. Window is once again moving up and down nicely. Sprayed some of the silicone lube on the channels. One extra thing I did was use a fiberglass brush and some Deoxit on the pins/sockets of the various switches. Helps get a better connection by getting rid of oxidation that can build up over time. The Deoxit helps prevent oxidation forming. ....This is something I do when working on old classic arcade video game connectors.

[@kentuckyyankee]

@@AlexZander688 Great news!

[@williambowden1509]

Thanks for that information.

[@kentuckyyankee]

You are very welcome

[@stumpmtsr]

Thank you, thank you, thank you.

[@johnbertaccini2541]

Could you provide the actual part number. I have the same make, model and color truck however looks like I have the wrong part. thanks again

[@ericcohen5967]

I have a 2005 with a slow motor on the passenger side. Thanks for the video. I might try some lube first. If not, is the 05 pretty much the same as this gen 2?

[@jamesholland2691]

Great video, thank you for showing all the steps and bolt sizes!

[@danhellard400]

Great job!!!

[@kentuckyyankee]

Thanks! Hope it helped

[@davidmills1152]

Bought the replacement from Advance Auto. 2 concerns. The replacement didn’t have the bracket that attaches window to regulator track AND the track is flat instead of curved like the original. Thoughts? Advice?

[@kentuckyyankee]

They probably gave you the wrong part

[@frankconley460]

Thanks for the help! Much appreciated!

[@fettieteam2333]

Just subscribed from this video , Thanks K.Y

[@kentuckyyankee]

Thanks for watching!

[@loydachamberlain8257]

Thank you, saved me some money, and I gained some knowledge

[@susanririe9084]

Ditto the other comments. I really liked your video because it was very thorough. Your video made me think I could change it myself.

[@kentuckyyankee]

You can !! Good luck!

[@ericleitz5644]

Whats with these 2002 Dakota regulators. I believe I have had to replace all of them. Drivers side twice.

[@kentuckyyankee]

Plastic junk 😂😂

[@jamesdurr5388]

Answered everything I needed to know thanks

[@GrampiesWorkshop]

How's she goin'? Well you made that job look easy!!! I remember doing a job similar to that and I made a mess of it!!! You did a great job. Thanks for posting!!!

[@somethingtodo7056]

Thank you so much, very simple following your steps

[@kentuckyyankee]

You're Welcome!

[@lensmith1943]

Hey KY.... An excellent video, touching on all the pertinent points of removal and re-installation.... GREAT...great job. Let me add, I love the Kentucky part of your handle but not too crazy about the Yankee part... However, considering your excellent and very helpful presentation, count me in as a supporter!!! Len from sunny SW Florida

[@karamasika]

Thank you Sir for an excellent video! You rock! Take care!

[@kentuckyyankee]

Another one coming up, my back one went out the other day 😂😂

[@pault5816]

Can u come fix mines

[@aired-downdisconnected4125]

Just did this. 20 mins in the driveway. 👍👍

[@kentuckyyankee]

Glad to hear it!

[@jimmyjohnsoniii]

👍🏻👍🏻👍🏻👍🏻

[@MichalRomero-m5z]

Thank you

[@kitty10141]

Bless you for the sneezes and the tutorial

[@kentuckyyankee]

Anytime!

[@Thermalmichgn906]

This guide was awesome. Thank you!

[@kentuckyyankee]

You're Welcome.. thanks for watching!!

[@TheRandyBarnett]

The cable on my regulator broke. After watching your video, I decided I could replace it myself. Part came in yesterday and I began work this morning. After everything was back together, the window wouldn’t close all the way (about 1/4 inch from the top). Then I realized that the old part had a black plastic piece on the top that went on the metal part that I received. This plastic piece is the one that has a groove in it for the window. Took it all back apart, added the plastic piece on and put it all back together. Worked great! Thanks for the video.

[@kentuckyyankee]

You're Welcome! Glad to hear you got it fixed!

[@mosisefu9148]

I had to pause it right about 2:31 because I could tell this was about to be the most enjoyable, I formative video about my baby Rei (2002 Dakota SLT). I appreciate your style sir. Keep them coming.

[@kentuckyyankee]

Thanks for watching!

[@Marco-te3mp]

Thank you, thank you. You just saved me $600 bucks. great instructional video, easy to follow for first timers like me. Im replacing 3 maybe 4 on my truck.

[@larryulstrom4749]

Lol, you sound like me. All 4 of mine are broken.

[@pantherdagger3460]

Great video., you showed every detail...other videos dudes didnt show how to disconnect the rods., I didn't know how much pressure to apply..but excellent attention to detail, thank you man

[@kentuckyyankee]

You're Welcome, thanks for watching!

[@kevtech733]

Thank you for your video. My Motor Widow regulator went so just followed your easy to follow video and every thing worked👍🏼

[@kentuckyyankee]

That's great, glad to hear it!

[@garciasimpson1138]

Thank you Sir, your video save me money and time, without having to go to the dealership to have my regulator replaced

[@kentuckyyankee]

Glad to hear it! You're Welcome

[@miguelacosta4509]

Great video... I like it

[@kentuckyyankee]

Thanks !!

[@brownwrench]

What do you do to detatch the glass when it has failed in the up position?

[@kentuckyyankee]

I cut the regulator cables then it drops down, but you may be able to use a wrench

[@brownwrench]

@@kentuckyyankee Thanks for the quick reply. I will bring my parrotbills home. Only one of 4 works on my newly acquired 2004 quad.

[@brownwrench]

I do have a 10mm ratcheting boxend shorty

[@ananam3647]

What should I do if the new regulator is in the up position? Can I just plug motor in to regulator and use switch?

[@kentuckyyankee]

Yes

[@johnr.timmers2297]

Heading to LKQ tomorrow to get a motor/regulator among other parts. Thanks for the vid

[@kentuckyyankee]

Thanks for watching!

[@isaactorres5457]

much appreciated

[@kentuckyyankee]

@@isaactorres5457 🤙👍

[@danielsimpson8929]

The light on the floor makes you look kind of crazy. LoL! I had to do this for a Saab last year. Good times.

[@danielsimpson8929]

@@kentuckyyankee pretty much everything I watch is how to based. South main auto is probably my most regular, even his brake job how to's are entertaining. Just joking about the lighting, more of a humor comment than a critiquing comment.

[@franciscopinedo1552]

Great video

[@kentuckyyankee]

Thank you!!

[@ericp3573]

i see a white wire that is cut off......why? what did that go to?

[@kentuckyyankee]

No wires cut off.

[@ericp3573]

@@kentuckyyankee at 4.08 there is a white covered wire cut clean. it has to go somewhere at some point. I doubt dodge would just leave an exposed wire for no good reason.

[@kentuckyyankee]

@ericp3573 Ok, sorry you're right. Look at 7.20 for whatever reason. Apparently, I cut the motor connector off. Been a while since I made this video. It had to make it easier to remove, I'm assuming. Good eye!!

[@ericp3573]

@@kentuckyyankee ah, yes I see it now it's junk so it did not hurt anything =)

[@ericp3573]

@@kentuckyyankee i notice the support for the window is not exactly that long, about 1/4 the window length but apparently it's enough. I have a new regulator on the wa for my 2004, this video gave me all the info I need, thanks. Just glad dodge did not have plastic door tabs that you would break all off.

[@JohnHenryEdenUSA]

Thanks for your informative and entertaining video.

[@kentuckyyankee]

You're Welcome thanks for watching!

[@michaelclaus2309]

Thank Brother you make things look easy

[@kentuckyyankee]

You're Welcome good luck!

[@claytonsmith9170]

Liked and Subscribed. Will be doing this (Drivers side though) later this week.

[@kentuckyyankee]

Good luck!

[@claytonsmith9170]

@@kentuckyyankee went awesome...except the parts store gave me the wrong part. Once I had the right one took about 1/2 hour or less to swap out, under $75 and now the window works as it should. Thank you so much!

[@kentuckyyankee]

@@claytonsmith9170 You are very welcome!