Dodge Front Brake Caliper Anti-Rattle Clip and Pad Installation - 1973 through 1997

  Рет қаралды 16,083

Stephen Rivett

Stephen Rivett

Күн бұрын

Пікірлер
@garybennett5207
@garybennett5207 4 жыл бұрын
Thank you so much for posting this video of where the rubber bands go. I have been changing brakes on vehicles for years but I’ve never seen rubber bands like this. Thanks again!!
@tpax3p
@tpax3p 4 жыл бұрын
Thank you so much. These rubber bands....Oh my))) I Didnt know where you put them )
@SteveRivett
@SteveRivett 6 жыл бұрын
While watching the video I noticed that the outboard brake pad sits loose on the caliper. I would recommend bending the tabs to make the pad cling on to the caliper or perhaps use 'Brake Disc Quiet' on the pad.
@nghiagip1861
@nghiagip1861 4 жыл бұрын
Hi, Stephen. I finished servicing my brakes, with new rotor and pads. I also noticed the outboard pad does not sit tight and rattles. You suggested bending tab, just wonder if it worked for you. Service manual did not mention this. The older dodges has some flawed design. Anyways, I appreciate your videos and advice. Thank you.
@robsomerton7390
@robsomerton7390 7 ай бұрын
Can't see how the o rings are installed, due to poor lighting.
@robsomerton7390
@robsomerton7390 7 ай бұрын
Can't see how the o rings are installed, due to poor lighting.
@BillMaryon
@BillMaryon 5 жыл бұрын
Thanks for the video, really helped! Any idea what the torque on those spring bolts should be?
@SteveRivett
@SteveRivett 5 жыл бұрын
If you skip to 1:04 and hit pause it appears that they are supposed to be 180 inch pounds.
@710concentrate4
@710concentrate4 6 жыл бұрын
What book is that?
@SteveRivett
@SteveRivett 6 жыл бұрын
It is the factory service manual. You can get them on Ebay for cheap.
@710concentrate4
@710concentrate4 6 жыл бұрын
@@SteveRivett okay thank you! I want to restore mine so I'm doing some research
@allenhammer7923
@allenhammer7923 Жыл бұрын
speak up and get a light and move the camera so we can see
@johnbecker5213
@johnbecker5213 2 жыл бұрын
best front brake design ever, gm is safer but this is better, ford sucks f150 is a joke, just comparing 70's front brakes.
@brenda-leehay9219
@brenda-leehay9219 3 жыл бұрын
Clips to hold on a brake caliber, one of the stupidest designs I have seen.
@phatsakk43
@phatsakk43 Жыл бұрын
There isn't any load on the clip. The caliper is fully captured in the spindle bracket. The clips just keep everything in place. It's actually a very good system.
How to Replace Front Brake Caliper 2011-2018 Ram 1500
14:39
Rear Brake Caliper Piston Rewind - With and Without Special Tools
6:38
ScrewsNutsAndBolts
Рет қаралды 684 М.
Try this prank with your friends 😂 @karina-kola
00:18
Andrey Grechka
Рет қаралды 9 МЛН
Brake Caliper Replacement - 1999 Dodge Dakota
30:50
Marcus Adams (Gerowen)
Рет қаралды 61 М.
Most Common Brake Installation Mistakes!
13:29
1A Auto: Repair Tips & Secrets Only Mechanics Know
Рет қаралды 4,7 МЛН
Complete Front End Brakes Update to the Dodge D150
18:01
Mopar Hot Rod Shop
Рет қаралды 4,7 М.
1st Gen Dodge Cummins Rotor and Pad Install
16:14
Maynard the Miser
Рет қаралды 11 М.
1980 Dodge W200 Brakes:  Master Cylinder, Booster, Calipers, Lines
23:24
Quick Speed Shop
Рет қаралды 1,3 М.
Brakes Still  Dragging? And Not a Frozen Caliper?
11:05
MotorCarNut
Рет қаралды 366 М.
Honda Tips: Brake Caliper Slide Pins
6:46
Big Dog50001 Automotive
Рет қаралды 123 М.
Installing Brake Caliper Covers - Quick and Easy!!
9:22
Exhausted_Performance
Рет қаралды 59 М.
HOW TO CHANGE A BRAKE CALIPER & BLEED BRAKES- 1994-2002 Dodge Ram
17:33
Smitty's channel
Рет қаралды 15 М.
How to Change Front Brake Pads RAM 1500
6:15
BoostedMotorsports
Рет қаралды 195 М.