Don't worry about the Mule, LOAD THE WAGON | PJ Dump Trailer

In this video were going to go through the process of unloading an overloaded ‪@officialpjtrailers‬ dump trailer! This is a PJ Trailer DE Gooseneck dump trailer, and its either overloaded, or something is wrong with it!
Like something you see in a video? good chance its linked in my Amazon Store: www.amazon.com...
Check out the EE Clothing Here: www.bonfire.co...
Interested in sending me something?
PO Box 169
12273 Big Tree Rd
Wales Center, NY 14169
Channel Sponsors:
Lanair Waste Oil Heaters: www.Lanair.com
Hotsy Pressure Washers: www.Hotsy.com
ESAB Welding Equipment: www.esab.com
Eastonmade Log Splitters: www.eastonmade...
For Sponsorship, or Marketing inquires please email [e-mail]
#tractor #kubota #equipment

[@dannymcgriff5977]

my old scissor lift dump trailer had this same issue I would take the bucket on my tractor and help get the load started. I switched to a Diamond C with a telescopic ram on the front and now I dont have that issue.

[@EverythingElliott]

The telescoping cylinder just makes so much more sense when you think of the leverages that go into it.

[@jrcrandall6047]

Nice trailer, the boy was having fun helping dad today. Moments that you both have together.

[@EverythingElliott]

all about creating memories, and the cool thing about this channel is I'll be able to go back and watch these again in 10 years

[@ryandehle8641]

Its a scissor lift dump trailer: Most of its lifting power is in the back. If you had moved a yard or two from the front to the back I bet it would have dumped it. I’ve never had a scissor lift dump trailer be able to lift its entire payload if it has a considerable load at the front of the trailer.

[@EverythingElliott]

Leverage definitely plays its part in this, but I’m a firm believer if a trailer says it can dump 18k pounds, it should be able to dump that 18k no matter where the load is in the box.

[@outdoorsinthe608]

Pretty sweet trailer!👍👍

[@EverythingElliott]

It’s what dreams are made of

[@hardworkingmanoutdoors]

I used clay fill before and it is heavy!! Surprised how little it actually dumped. I’ve considered a gooseneck dump trailer before but haven’t pulled the trigger yet.

[@EverythingElliott]

I think a gooseneck pulls so much better than a bumper pull. I’d buy a gooseneck over bumper pull on any type of trailer!

[@hardworkingmanoutdoors]

@@EverythingElliott they do pull nicer but bumper pull are more convenient imo.

[@EverythingElliott]

@@hardworkingmanoutdoors too many people want to borrow a bumper pull. I got away from them years ago because friends were using it more than I was

[@fricknjeep]

hi there nice trailer , best to all john

[@EverythingElliott]

Thanks, wish it were mine!

[@nickbourgeois3703]

That's a nice trailer.

[@EverythingElliott]

It sure is. Owner is a nice guy too!

[@hayesrutherford9415]

Seemed like it was a bit wimpy on the dumping. I might be wrong but I think my 14' gooseneck has a heavier duty Rugby brand scissor. That material was heavy so owner should just load it in the back end and try a bit more with future loads.

[@EverythingElliott]

You are fighting a tough fight there, you want the weight in the back for dumping, but you don’t want so much that it doesn’t have enough tongue weight. Theres a perfect balance in there somewhere

[@mikelangford1835]

Your dump cylinder has a capacity and it’s under the gvwr. The idea is you could haul a low density load like mulch and also a mini excavator or skid steer. They make this trailer with tandem dual and dual cylinders if you need to dump the max load. I own two for roof tear offs. You’ve kinda got the roofers special. It’ll hold and dump as much shingle and debris as you can stuff into it, but won’t be overloaded the same way a 14k bumper pull would be.

[@EverythingElliott]

Am I crazy to think it should be able to dump the payload it’s rated for…

[@scotthillman7588]

Nice 106.5 WYRK Clay Moden cameo in there... Go Bills!

[@EverythingElliott]

Haha go bills!

[@rexcamp261]

That'd be nice to have but you always have to remember and load light on the front heavy in the rear and s*** dump easily I think! Lol Nice video

[@EverythingElliott]

Leverage is a huge factor with dump trailers. Unfortunately I didn’t load the trailer, so I had no decision in where the material was

[@1squirreldog]

Its about like everything else made nowadays. Make it look good but use the cheapest material possible just to get by . But yes as a gooseneck they calculate in some weight as being on the truck. That sounds good for gvrw but when it comes to dumping they need enough power to dump the recommended weight & a little extra imo.

[@EverythingElliott]

I think it should be able to dump the weight it’s rated to hold. Now I didn’t scale it so I don’t know exactly, but it certainly didn’t look like 18k

[@RRabbit-pb1cm]

I wonder if center mast in the front would work?

[@EverythingElliott]

I’m a fan of telescoping cylinders, I don’t know if I’ve ever seen one on a gooseneck dump trailer though

[@SacredDuramax]

@@EverythingElliott DiamondC trailers have the telescopic mast on their gooseneck dump trailer

[@EverythingElliott]

@@SacredDuramax I'll have to check that out! Thanks!

[@guerrydotson3213]

That’s a dream trailer I could give a shit about the color. It would be a bit much for the Tacoma……BigTex 12ft will have to do.

[@EverythingElliott]

Gotta match the trailer to the truck, that’s for sure! Thanks for watching!

[@js4455dl]

You probably had about 25000 on that trailer lucky you had the tractor

[@EverythingElliott]

Yeah the trailer would have went right back to the owner if I didn’t have the tractor

[@BGWenterprises]

So 25k on bill of sale. 20k on trailer sticker? . Sounds like a de-rated trailer from new. A trick for staying under 26k for non CDL hot shots. But the odd thing is 20k trailer and 9k or more on truck gvw is not legal as a non-CDL?? The gross combination needs to be under 26k As crazy as this sounds,Technically empty, they could put you out of service without a cdl. . My rule is spec a dump hoist thats intended for a bed 2 foot longer then the bed actually is. Plus the more bed behind the pivot point the less load on hydraulics. . We had one truck with 3.5 feet behind the pivot 12' bed with hyd's intended for a 14' bed. Would dump dirt 4 foot high. . It didn't leave private property with that load, rear tires where rubbing bed underside. Probably near 15k in dirt 0.01c

[@EverythingElliott]

Anything you hook this trailer to, the driver is required to have a CDL A. I am a firm believer that if a trailer says it can dump X amount of pounds, it should be able to dump X amount of pounds no matter where that load is within the box. I like your idea of making the pivot point further forward, using leverage in your favor!

[@RedHeadEd615]

Probably coulda just used the tractor to give it the initial little help lifting. That first 6 inches is the hardest part.

[@EverythingElliott]

@@RedHeadEd615 if it were my trailer, I would have done that...but I wasnt willing to knock the new off a trailer that was 5 days old and I didnt own it...