predator 212cc stage 1 soon to be stage 2 doodlebug swap all parts from GoPowersports.com
Пікірлер: 104
@meekfreak283 жыл бұрын
People want more minibike videos!?!? Leave a reply
@simsum1argh8823 жыл бұрын
Yes please.
@trevinskiking21653 жыл бұрын
Talk is cheap Meeks, judging by the lack of replies (dishearting isn't it) BS walks, Goodluck.. Regards Trev NZ 😇
@GratefulEd9073 жыл бұрын
I just bought one today for my daughter
@ThatHondaActy2 жыл бұрын
please make more videos on this
@peterlamoreaux10202 жыл бұрын
Yes
@paulspomer16 Жыл бұрын
1:56 the non-hemis are better for modifying anyways, you got the right choice.
@juliannajoyce68452 жыл бұрын
you could add pegs to the back axle hub so that when it tips over it doesn’t crush the air filter or pulleys on opposing side
@nathanmciver64962 жыл бұрын
opposing side! lol dienasty
@fatbuddycat3 жыл бұрын
She's a beauty bud! Nice job on the paint. I posted a link to my channel on another video, I look forward to seeing more from you (you might dig my non-hemi/hemi piston build).
@Endeavor5453 жыл бұрын
Yeah, you turned that bike into a really cool mini. Impressive!
@meekfreak283 жыл бұрын
Thank you!
@mclay34822 жыл бұрын
I'm a small engine mechanic. The "check valve" looks like a fuel filter used on a lot of Stihl brand outdoor power equipment machines
@nonexistent58193 жыл бұрын
How did u remove the governor
@hiddenhollowloft56783 жыл бұрын
I just got the same bike in the same wore out condition you described.
@meekfreak283 жыл бұрын
It’s always asked about when people see it sitting in corner
@heathenprojects26393 жыл бұрын
Cool bike new sub just wish I could ride a bd I'm 6 5 way to small
@meekfreak283 жыл бұрын
Welcome to channel and thank you!
@robertsoto42399 ай бұрын
Yeah those filter suck i had them on mine and those kept on killing the engine I took them off my bike runs 10000 percent better
@sanhoe1472 Жыл бұрын
I have the same bike and my brakes don’t work they only work when I push the bike backwards how come
@jbvlgs95682 жыл бұрын
Just finished painting my doodle she getting painted black and I just ordered a stage one kit for my 212
@vermontcows10802 жыл бұрын
Yours was worse than ours. Ours came with brakes a rear tire brakes a rip string an engine not even all of it a clutch thing a button starter for saftey or somethin like that. It didn’t come with a bit of the engine the front tire and axle and no air in the back tire. Good thing is it came with the chain.
@everythinggokarts38682 жыл бұрын
YEET! That was the best part of the video. It looks like you tried to make your minibike look like a coleman! IT LOOKS AMAZING! I never thought a doodlebug would look so good in red!!
@meekfreak282 жыл бұрын
Thank you, it’s a dark candy apple paint
@bikeswithpower65643 жыл бұрын
that thing is nice. for sumone that is doing a stage 1 use a hemi thay have bigger cams from the factory now
@meekfreak283 жыл бұрын
Thank you. I just installed a hemi on a friend bike. I did not know that
@trevinskiking21653 жыл бұрын
How much bigger Cam than the "old" Hemiheads ?....Trev, Cheers
@trevinskiking21653 жыл бұрын
Buy American & KEEP your family working ,China will take over soon ! Trev New Zealand 😇
@Samsquatch69 Жыл бұрын
Do you have a link for the header pipe??
@vermontcows10802 жыл бұрын
And kill switch not saftey thing
@Chapo_3135 ай бұрын
Where’s the exhaust from?
@gets-it-in36587 ай бұрын
What header is that and from where
@vermontcows10802 жыл бұрын
The fly wheel not the rip string
@arcticgummibear45002 жыл бұрын
Great work on the Doodlebug!!
@the_gold_canopy5 ай бұрын
Cool build man.
@albertmichall573210 ай бұрын
Good job thank you
@patricktrous2 жыл бұрын
I've got a db30 I'm building but I am using a mb200 rear.
@patricktrous2 жыл бұрын
Lots of mods to even make it fit.
@guskinderman39873 жыл бұрын
what exhaust pipe did you use specifically? can you give me the link ?
@nonexistent58193 жыл бұрын
What header is that
@trevinskiking21653 жыл бұрын
@@nonexistent5819 probably gopowersports one; centre outlet you can get them off Amazon - but run a liile glass pack muffler with it.I'd make you one but I've recently had a massive stroke@ 57 & used to export headers to the UK Classic Car market etc.Cheers Trev New Zealand (Home of the world's fastest old Indian) try running a Supertrapp muffler if you can afford a basic bike model: they are tunable for more or less torque & HP & noise.I go back to the 1960's & '70's with Karts & original tube frame industrial engined Minibikes.
@bagwellpower29512 жыл бұрын
Liked and subbed. Post up some more minibike videos. I have a good bit of mini bike videos on my channel, mostly racing. Check it out if you get time. Thanks
@anthonyreddy2834 Жыл бұрын
Nice job! I'm in the process of Restoring One Right Now that I got for free! Question, does your back sprocket have 5 bolts hold it too the wheel?
@tomislavpernar28402 жыл бұрын
Look werry nice compact powerfool and fun to drive ...i wish to made one but unfortuatly here in Europe no Frame to buy...Also im not sure if made it can registrate eassly ... 🤔 wheels and engine and other stuf its not a problem...
@bhannig2 жыл бұрын
Just got a db30 frame out of the rafters at the shop. Stock red with all the stickers on it. Put a new predator ghost on it. She's mean.
@boobooquisha49873 жыл бұрын
That thing has to go more than 40?
@meekfreak283 жыл бұрын
42 was last time I seen on my Phone gps
@caliboysemien21333 жыл бұрын
Nice bike! Whats top speed?
@meekfreak283 жыл бұрын
42mph! In the process of restoring another one! Check it out
@caliboysemien21333 жыл бұрын
@@meekfreak28 i sure will!
@ELVISRN13 жыл бұрын
this set up has great low -mid end torque.
@trevinskiking21653 жыл бұрын
@@ELVISRN1 Hi, that's because it's probably near stock.Trev NZ Cheers
@traviswilmath16542 жыл бұрын
What size is the chain? I have same setup but I can’t find chain because mines super loose
@OhManCamsPOV2 жыл бұрын
I love how he stopped to support the great American in the back ground doing a pull 😂🫡
@ralphcantrell32143 жыл бұрын
Nice doodle bug resto. Is that a rattle can paint job? If so, what brand and color did you use?
@meekfreak283 жыл бұрын
Thank you. Duplicolor cherry red metallic
@teckdecker323 жыл бұрын
@@meekfreak28 how many cans did you end up using? for primer and the red
@nathanmciver64962 жыл бұрын
Wow, what a weird sounding exuast!!!!!!!
@adaofromdiscord3 жыл бұрын
did you have to cut the torque converter a lot of people are saying you do a lot are saying you don’t
@edgualdino6283 жыл бұрын
Did the motor swap bolt right in to the frame or did you drill it or a new plate
@meekfreak283 жыл бұрын
Bought the adjustable plate and had to drill holes still
@gator27543 жыл бұрын
Did the adjustable plate make room for the TC? Or do you still need to trim the back plate or use risers under the adjustable plate?
@vermontcows10802 жыл бұрын
Never mind it was the throttle not the clutch
@stephenmallard3040 Жыл бұрын
Where you find wheels at?
@Gam3r1343 жыл бұрын
for How much $ u got that frame
@jebus62463 жыл бұрын
I’m really about to spend $700 on my own mini bike, to build it myself fully ofc
@trevinskiking21653 жыл бұрын
I could build you a trick one for that minus engine but I'm in New Zealand & getting over a massive stroke @ 57 that nearly killed me. Cheers Trev
@trevinskiking21653 жыл бұрын
What's ofc btw ???
@jebus62463 жыл бұрын
@@trevinskiking2165 of course
@trevinskiking21653 жыл бұрын
@@jebus6246 Thanks..the internet is forming a new pigeon English ! ( Writing etc runs Professionally in the family) : that's not even abreviated correctly.Cheers Trev NZ 🙃
@JesseS.3 жыл бұрын
@@trevinskiking2165 youre a fabricator?
@chasewalters6012 жыл бұрын
So how fast does it go?
@Mason-Dain3 жыл бұрын
Beautiful
@meekfreak283 жыл бұрын
Thank you
@simsum1argh8823 жыл бұрын
They're mad wheelies
@backroadscamping3 жыл бұрын
Zip tie it under seat
@ELVISRN13 жыл бұрын
you mean hydrolic brake?
@ELVISRN13 жыл бұрын
no chain tension-er ? got my torque converter cover on and looks great .
@lynxwolvez66523 жыл бұрын
How do uou put gas in it
@meekfreak283 жыл бұрын
I have a race fuel can I use with the flexible hose
@rtmotovlogs72353 жыл бұрын
looks sick
@TheHondaracingpower3 жыл бұрын
Did you have to do any modifications for the torque convertor to fit right
@meekfreak283 жыл бұрын
Yes had to shave the rear side down to clear frame
@TheHondaracingpower3 жыл бұрын
@@meekfreak28 hell yea bro thanks. I just got me a baja dirt bug and im getting ready to build it. Thanks for the info
@meekfreak283 жыл бұрын
@@TheHondaracingpower no problem. They sure are fun and easy. Be sure to subscribe for more !
@TheHondaracingpower3 жыл бұрын
@@meekfreak28 will do bro check out my vids ill be uploading on the mini bike soon.
@ELVISRN13 жыл бұрын
@@meekfreak28 with out a doubt , the torque converter is the way to go.
@barryrinard66263 жыл бұрын
Were you able to use the stock chain tensioner?
@meekfreak283 жыл бұрын
No I used a #35 chain. I keep chain tension by sliding engine forward.
@ELVISRN13 жыл бұрын
@@meekfreak28 I wasn't happy with no tension-er ,chain was still sloppy with moved up engine. innovated one in there with a good tension spring and it works well.
@john_rocks_jax3 жыл бұрын
Did you have to mod anything for the torque converter setup
@meekfreak283 жыл бұрын
Yes. Have to notch the rear of converter plate to clear the frame
@fatbuddycat3 жыл бұрын
I'm doing a no mod. Also, you can find a 30 series "flat" plate on ombwarehouse.com for $99. It might be another option for situations similar to this!
@ELVISRN13 жыл бұрын
I used a mount plate under the engine and notched out the 4 torque converter mounting holes and made them oblong so the plate could swing up counter clock wise ,then tightened the plate to the engine and everything fit well.ALSO grinded off a part of the back of this plate to keep it from hitting the engine.
@fatbuddycat3 жыл бұрын
@@ELVISRN1 kzbin.info/www/bejne/a3XHnnR5rNVpY9k. This was a no frame mod, no cut, drill holes and mount method with an active spring tensioner.
@trevinskiking21653 жыл бұрын
There's a pattern forming here across the Minibike crowd in relation to Q & A . New Zealand runs good commercial fishing expeditions especially for Marlin😇🙃Cheers Trev NZ
@scorpioslab2 жыл бұрын
Mount the tank in top, or get an aftermarket moped gas tank. It would look a lot better, and easier to put gas in.
@RainbowFleXxx2 жыл бұрын
I'm glad cam was super low because I wanted to know how to start one
@MrWideballs2 жыл бұрын
Must be a chore to keep the front wheel on the ground