Door Alignment On A Mopar. 1969 Super Bee Project.

  Рет қаралды 2,360

Ryan Barsness

Ryan Barsness

Күн бұрын

showing you how I adjusted my door to fit and close properly.
-Merch
www.etsy.com/s...
-Ebay Page
www.ebay.com/s...
-Instagram
Ryan_Barsness_YT
-Facebook Page
/ ryan-barsness-youtube-...

Пікірлер: 18
@peacemaker6156
@peacemaker6156 2 жыл бұрын
Yes sir its tha hingepin bushings. I installed new ones on my satelite and made a world of diffrence.
@chevybrat
@chevybrat Жыл бұрын
Should the fender be removed to replace the hinge pins and bushings?
@ryanbarsness
@ryanbarsness Жыл бұрын
Makes for an easier process
@moparnut6286
@moparnut6286 2 жыл бұрын
What condition were the hinge pins this is a take time deal done it many times and not just on mopars. Really helps to have a second pair of hands to hold things while you make adjustments.
@ryanbarsness
@ryanbarsness 2 жыл бұрын
They seem good but are probably a little bit worn. Sucks that the previous guy had to screw with it.
@moparnut6286
@moparnut6286 2 жыл бұрын
@@ryanbarsness I could get the door dead on sucks that I'm not there😂
@ryanbarsness
@ryanbarsness 2 жыл бұрын
@@moparnut6286 if you have a secret to doing it you should tell me. Shoot me a message.
@moparnut6286
@moparnut6286 2 жыл бұрын
@@ryanbarsness no secret just years of experience and knowing what to do and not to do there are many ways to get the panels lined up some are short and sweet others are long and involved.
@jakeimpastato1444
@jakeimpastato1444 Жыл бұрын
Rebuild those hinges.
@paulbryan3909
@paulbryan3909 Жыл бұрын
Does no good to adjust the doors with "slop" in the door hinges.
@ryanbarsness
@ryanbarsness Жыл бұрын
There isn't really any slop in the hinge. The previous owner was in the process of removing the door so the bolts where loose and out of adjustment
@mrpurcountry
@mrpurcountry 2 жыл бұрын
Watching your video I see you lift the door to shut it your top hinge pin is wore out and probably the hinge itself is Warren also years of rust and no one ever Greece's them.
@ryanbarsness
@ryanbarsness 2 жыл бұрын
It isn't a problem after I adjust it properly but yes I agree that there is probably some wear
@mrpurcountry
@mrpurcountry 2 жыл бұрын
@@ryanbarsness just a 32nd of an inch on the two hinges top and bottom will drop your door about a quarter, and you really need all the bolts in the door tightened to check the gap. A good repair manual will teach you about adjusting doors. Uniform door gaps were not standard equipment on these cars.
@ryanbarsness
@ryanbarsness 2 жыл бұрын
@@mrpurcountry absolutely
@GGIUAMHI
@GGIUAMHI 6 ай бұрын
Dude, start with cleaning up your garage 🙄
@ryanbarsness
@ryanbarsness 6 ай бұрын
Things are very different these days. Back when that video was that it was a 32x32 garage. Now its 32x112. I appreciate the advice but I don't tell you how to keep your garage. Have a nice day.
1969 Super Bee Updated Plan & Information.
8:33
Ryan Barsness
Рет қаралды 293
Mopar A Body door striker repair and replacement
17:30
The REAL Guy Garage (The Real Guy Garage)
Рет қаралды 2,3 М.
SISTER EXPOSED MY MAGIC @Whoispelagheya
00:45
MasomkaMagic
Рет қаралды 10 МЛН
НИКИТА ПОДСТАВИЛ ДЖОНИ 😡
01:00
HOOOTDOGS
Рет қаралды 2,3 МЛН
How to Restore a Mopar Door Window Assembly: Part 2
33:20
Angel Garrido
Рет қаралды 10 М.
How to Fix  BAD Door / Panel Gaps & Metal Finish -  DIY Auto Resoration
16:22
Guzzi Fabrication - D.I.Y Auto Restoration
Рет қаралды 181 М.
68 to 70 B body door glass removal
18:49
David Rea
Рет қаралды 3,3 М.
How to Restore a Mopar Door Window Assembly: Part 1
26:04
Angel Garrido
Рет қаралды 13 М.
Panel Alignment Tips & Tricks - How to Get Perfect Panel Gaps
4:54
Make It Kustom
Рет қаралды 102 М.
Setting and Aligning Body Panel Gaps on the 1971 Barracuda Episode 11
38:30
Carthage Classic Cars
Рет қаралды 36 М.
1969 Dodge Charger Hardtop Rear Seat Cover Installation
18:23
LegendaryAutoInteriors
Рет қаралды 85 М.
How to remove 1968 1969 1970 Dodge Charger Dash Harness
15:35
Jonny Mopar
Рет қаралды 2,9 М.
Door Locks & Latches • 68 Dodge Charger R/T
10:31
Classic Car Studio
Рет қаралды 14 М.