Mounting a single alarm sensor on a Double Hung window can be a challenge, but there are simple solutions. You do NOT have to use the magnet supplied with your sensor. Watch this video.
Пікірлер: 48
@xcmskim43 жыл бұрын
I used to be a professional alarm installer. If we ever encountered a double hung window and could not get the window to operate properly with one contact between the two sashes, we would install 2 contacts (top and bottom sash). On most installs for major brand windows, we had to use two. I think there was only one installation where we got away with using just one contact. I was taught not to mount the magnet on the glass as the adhesive can melt and fall off from the heat.
@Ozarkwild3 жыл бұрын
In this solution, the magnet nor the sensor is mounted to the window. Both are mounted on the sashes. The alarm companies make more money if they train you to install two sensors. This solution works as well as two sensors, and I would say even better due to less sensors used, less chance of failure.
@0.5los2 жыл бұрын
@@Ozarkwildso I got a question for you both, say there’s 3 windows next to eachother, if there’s an alarm sensor on one of the windows and you open a differnt one will it stilll go off???
@GaryBowen732 жыл бұрын
@@0.5los alarm will only be tripped when the sensor and magnet are seperated....so if you have three windows, you will need three sensors...
@miletread10 ай бұрын
Thanks for this! I'm window shopping, and am interested in double hungs, but my first thought was, "How would that work with my alarm system without paying for twice as many sensors?" Perfect solution!
@Ozarkwild10 ай бұрын
You are welcome! Thanks for watching!
@SuperPussyFinger4 жыл бұрын
I don’t know who you are, but I know genius when I see it. I hadn’t realized that the contact sensors were using plain magnets on one side. I thought there was some circuitry on both halves of the contact sensors. I have been searching for a workaround to solve the double-hung conundrum for quite some time. Thanks for the knowledge. You may even choose to camouflage the magnets with a little white spray paint.
@Ozarkwild4 жыл бұрын
Thank you for the reply and comment.. Good call out on painting them white.
@sailure14 жыл бұрын
yeah this is how Burglars by-pass window sensors...they see the sensor, softly crack the adjoining glass (yes, you can near-silently break 2 pane glass, you take a rock and slowly press near a corner til the pane cracks.), remove the glass pieces, then place a magnet on the sensor. the sensor can now be moved and it will not alarm since there is a magnet taped to it.
@Sakuragyaru-833 жыл бұрын
Thank you so much! I have been searching and searching for a video like this!
@Marie-ts8rp3 жыл бұрын
Thank you sir!! I hate double hung windows & have same issue but ordering from Amazon now😃
@shelbyhuffman164 жыл бұрын
Thank you for your tip on the window alarms. I'm curious how you would do this on a verticle double sliding window.
@Arupnara10002 жыл бұрын
Thanks Lonesome XJ. Great solution! I have a similar issue and I was going to ask for the link to the Amazon site but I noticed you posted it for someone else. Thanks
@EnergizerTX3 жыл бұрын
great idea. I was about to figure something out myself. Do you have a link to the magnets and 3M discs you used? are your sensors normally closed or open, being they are wireless... I guess inverting the magnet could resolve that.... mine are hard wired... so I may have to reevaluate this approach...
@missouribob78504 жыл бұрын
Thanks for the video. Is the LOU (base unit) plugged into an ethernet cable?
@user-cd2zt7yc2t4 жыл бұрын
thanks for posting the video, i am in the same situation so thinking of trying your solution. I'm curious though since the magnet and sensor are in plain view, what if someone broke the window and put (attached) another magnet on the sensor and moved the window up. That would mean the sensor never trips? i know there are glass break sensors available, but not everyone has a glass break sensor installed, so i'm just asking a hypothetical question...
@Ozarkwild4 жыл бұрын
I understand your premise, however one could just break the window and crawl through without ever manipulating the sensor. Adding a glass break sensor would be the only fail safe solution. A motion sensor on the inside would work as well.
@willothewispl3 ай бұрын
When you move either wi dow with the original 2 piece alarm won’t it still trigger the alarm, if you can get it to fit right on the window.
@ocgabe7 ай бұрын
Absolutely brilliant; thank you!!!!
@Ozarkwild7 ай бұрын
Glad to help! Thanks for watching
@ocgabe7 ай бұрын
@@Ozarkwild I used this video (purchased your linked magnets and tape) on my window sensors; everything works great! One think I'd like to mention: Some of my sensors were not reading as "closed". I was on the phone with my security company and we couldn't figure it out. I finally thought of flipping my magnets around thinking that maybe the pole orientation had something to do with it and low-and-behold, it worked! Do you know anything about this? I am just wondering if my "solution" was valid or if my sensor just happened to kick in.
@kristinahundorf96532 жыл бұрын
Where ya get magnets?cuz got new hung windows thanks
@JoshuaSchrader4 жыл бұрын
Do you have a link to the magnets you used? I am having the same issue and all the magnets I am finding have the foam double sided tape that adds unwanted thickness. Thanks!
@Ozarkwild4 жыл бұрын
Here you are... www.amazon.com/gp/aw/d/B01N2RNRJJ?psc=1&ref=ppx_pop_mob_b_asin_title
@kieshathompson6907 Жыл бұрын
Thank you so so much this helped me a lot 🙌
@Ozarkwild Жыл бұрын
Glad to have helped! Thanks for watching!
@tctriv92784 жыл бұрын
Would this solution work with ring alarm sensors? genius solution by the way...thanks for the video even if you don't think it would work with ring.
@Ozarkwild4 жыл бұрын
It should work, providing your ring sensors are triggered by the standard magnetic switch.
@brianlundgren Жыл бұрын
Awesome, thanks!
@Ozarkwild Жыл бұрын
Thanks for watching!
@awalden Жыл бұрын
Before affixing the magnet to the window frame, I would have painted it white (with an epoxy spray-paint).
@herpderp5222 Жыл бұрын
Have you had any issues with the sensor/reed sticking/stuck/magnetized in the closed position?... Meaning the sensor doesn't recognize the window is open and thinks it is still closed. I've had issues with other contact sensors getting stuck/sticking like that.
@Ozarkwild Жыл бұрын
No issues at all. The system has been working now for over 3 years. We just bought another house with double hung windows and I am about to mount the sensors the exact same way.
@neal51864 жыл бұрын
Genius
@stevendavis4300 Жыл бұрын
Great idea I have 10 windows to complete. What size are the magnets? Did you get them from Amazon?
@Ozarkwild Жыл бұрын
I added a link to the magnets in the comments
@0.5los2 жыл бұрын
so I got a question , say there’s 3 windows next to eachother, if there’s an alarm sensor on one of the windows and you open a differnt one will it stilll go off???
@Ozarkwild2 жыл бұрын
The alarm will not trigger unless the sensor contact is broken. If you have a complex situation such as a bay window, or three as you mention, and it is not practical to use sensor (contacts), you could use a motion sensor to cover the area.
@santossuarez4 жыл бұрын
I also went with the same company after almost getting ripped off by a contractor trying to sell me an ADT system for over 5K. Yep! I did my home work and came out with this Lifeshield. I've been working on the system for the last two days and I came across with two faulty doors sensors. I had to delete one of them and now, having a hard time to add it. Any idea? Thanks for your video, very clever!
@Ozarkwild4 жыл бұрын
Hello Ray, were you able to get the other 2 sensors working?
@willothewispl3 ай бұрын
When I try to go to the page to get the magnets, it comes up, cannot find the page.
@pastorofmuppets924 Жыл бұрын
Nascom capsule on the glass. Works Everytime.
@Ozarkwild Жыл бұрын
Nascom capsule is too thick. On a double hung window we are working with less than a 1/16", much less in most cases
@pastorofmuppets924 Жыл бұрын
@@Ozarkwild On the glass. I do this all day everyday
@azharbhatti8433 жыл бұрын
Pls tell me the name of the sensor
@LeeH-Ranger832 жыл бұрын
Ring makes a "Thin" mount magnet
@Ozarkwild4 жыл бұрын
Here’s the link to the magnets I used www.amazon.com/gp/aw/d/B01N2RNRJJ?psc=1&ref=ppx_pop_mob_b_asin_title