Drilling Properly for Pipes in a Sink Cabinet

  Рет қаралды 44,475

Home Maintenance Solution, Inc

Home Maintenance Solution, Inc

Күн бұрын

Пікірлер: 11
@JoeDoe2
@JoeDoe2 2 жыл бұрын
I did a search on 'drilling kitchen cabinet water pipe holes' and this was the first video that came up. I never got to see any holes drilled. I'm having trouble finding handyman videos that show an entire job from start to finish. Each video is just a small fraction of a job. And I still don't understand the overhang thing. It seems to me that would leave a gap between the cabinet sections cause they can't be placed flush with each other. If I found a video that showed the entire job of cabinet installation, then I'd understand. Maybe.
@zzubuzz
@zzubuzz 4 ай бұрын
If it's a brand new cab that you have to assemble, you can probably dry screw everything (no glue) except the bottom (or the back in my case) then measure, not that your method doesn't work just that it might be easier to do this way. In my case the pipes come thru the wall into the back, and I have already dry assembled it (no glue just screws)..without the back panel and so when I have it in the exact correct position then I'll jot down my measurements. The other cabs have to be exactly where they are going to stay including leveling feet or shims or those measurements will not be accurate to it's final position.
@lynnrabe4428
@lynnrabe4428 4 жыл бұрын
Awesome info, thank you. I am drilling into floor of cabinet as well. New sub!
@moxiemusic
@moxiemusic Жыл бұрын
Awesome vid ..Thank you !!!!
@townsend96
@townsend96 4 жыл бұрын
Thank you. That's a great tip.
@littlemissy8356
@littlemissy8356 4 жыл бұрын
That doesn't tell me where in the cabinet to drill the hole
@Homemaintenancesolution
@Homemaintenancesolution 4 жыл бұрын
Probably should watch it again. You may have missed something.
@Oliapgh
@Oliapgh 4 жыл бұрын
drilling is not an issue.. how do you actually install the cabinet with the pipes sticking out from the floor and the wall?
@Homemaintenancesolution
@Homemaintenancesolution 4 жыл бұрын
You will need to either leave the wall pipe un glued and glue it after the cabinet is installed or cut it very close to the wall, if it is already glued. Cutting close to the wall will actually help with the finish work. You can keep your trap adapter close to the back of the cabinet and cover it with a deep ecshcusion.
@Oliapgh
@Oliapgh 4 жыл бұрын
@@Homemaintenancesolution Thank you!
@mjk8292
@mjk8292 5 жыл бұрын
does not help
How to Cut PERFECT Holes for Pipes In Your IKEA Kitchen Sink Cabinet
7:43
Kitchens by Rannes
Рет қаралды 18 М.
The Singing Challenge #joker #Harriet Quinn
00:35
佐助与鸣人
Рет қаралды 33 МЛН
Ice Cream or Surprise Trip Around the World?
00:31
Hungry FAM
Рет қаралды 10 МЛН
Random Emoji Beatbox Challenge #beatbox #tiktok
00:47
BeatboxJCOP
Рет қаралды 62 МЛН
Wait… Maxim, did you just eat 8 BURGERS?!🍔😳| Free Fire Official
00:13
Garena Free Fire Global
Рет қаралды 9 МЛН
How to Install a Farmhouse Sink in a Kitchen Cabinet
10:29
How to Hacks
Рет қаралды 223 М.
Hit Studs! AVOID Pipes and Wires! Cabinet Installation Secrets!
7:38
The Funny Carpenter
Рет қаралды 168 М.
How To Cut Cabinet Holes For Plumbing + Install Water Valves
8:02
DIYwithMAX - 🇺🇦
Рет қаралды 17 М.
4 Plumbing Parts/Tools You Should NEVER Use. NO Plumbing Fails
26:25
jeffostroff
Рет қаралды 1,5 МЛН
Rotted Sink Cabinet Floor--How To Fix
8:55
The Honest Carpenter
Рет қаралды 770 М.
Everything You Need to Know About Wall Plugs
17:20
Home RenoVision DIY
Рет қаралды 4,1 МЛН
How to fit a bathroom vanity unit & basin STEP BY STEP with CHAPTERS!
23:29
P-Trap Installation: Drain Doesn't LINE UP with Bathroom Sink Pipe - 2022
5:21
The Building Expert
Рет қаралды 1,3 МЛН
The Singing Challenge #joker #Harriet Quinn
00:35
佐助与鸣人
Рет қаралды 33 МЛН