Great work Sir! Theres few/none places near with capability of repairs and disable persons usually have few resourses. With your help at least the easy repair can be performed.
@brianjames68902 жыл бұрын
Brilliant Tom, you are showing me things that I can honestly say that I had forgotten about. Not sure it’s down to old age or am I starting to lose it. LOL Cheers once again. 👍👏👍👏🏴
Жыл бұрын
Really enjoy your videos . I am hoping that you can do more on the control board.l would like to know what are the critical imputs required to engage the relay and fire the MOSFETs. I have an old EMC scooter and suspect the board. I am in Australia and it seems I have to order parts from the UK.
@cliveharmsworth28943 жыл бұрын
Thank's again Tom, very informative video. Can't wait for the follow up video.
@harleyquinn80284 ай бұрын
Great vid will be ordering parts from you tomorrow
@michaeldominy20842 жыл бұрын
Thank you very much, That was very informative, although my scooter is not the same, it does give info. My scooter is a shop rider, and having trouble with wig wag, also replaced the batteries but starts slowing down to a stop after several minutes.👍
@josephmirigliano87283 жыл бұрын
Great 👍🏻 video I always enjoy watching your videos
@josephmirigliano87283 жыл бұрын
Great 👍🏻 video I always enjoy watching your videos pal
@stephenmaas87755 ай бұрын
I had another question... you mentions in this video changing the terminal as an option instead of changing the motor as a whole! Do you mean the the individual metal connection or the male connector as a whole? and would that be easy for myself to change also..? Many thanks for your time...👍
@tomjacques45 ай бұрын
Hi depends on how bad the scorching is or plastic melting of the connector and if you can actually remove the terminal. Without damaging anything. Best getting a new loom a little bit more expensive but hassle free plug and play.
@stephenmaas87755 ай бұрын
@@tomjacques4 Would this create the issue of working and not working and working again or does my situation sound more like a brush issue? and the bad contact creating a surge on the plugs over and over?
@andrewm5143 жыл бұрын
Lovely Job Tom,
@RobbieBear-hi1fo2 жыл бұрын
Can you help and advise me please. I bought a Green Power ZT500. Ive only had it 9 months and I went to Tesco's and suddenly it just stopped. The motor whizzed round but did not engage the drive function. Everywhere I went to get it fixed, as soon as I said, Green Power scooter, nobody wanted anything to do with it. I phoned Green Power in Hull and because I didn't buy it direct from them they wanted double the call out fee, £180-00 and then pay for parts and labour probably costing me £450 in total,which I could not afford on my pension. I live in Reading, Berkshire and im 68 ex army man who got blown up on the hms Sheffield in the Falklands where I lost the back of my right leg and suffered severe burns to 30% of my body so I find it hard to get around and really need my scooter up and running. I'm not mechanical minded as I'm a retired chef, Baker, Butcher. Could you please advise me what to do and what to look out for as I'm desperate to be able to get out and about as without my scooter I am housebound. Many Thanks for taking the time to listen to me, I remain. Yours most sincerely. Mr Robert Bear. Reading, Berkshire 07523122426
@turboteabag083 жыл бұрын
Do you have a video of why a scooter would squeak so loudly while being driven? It's a Pride pursuit scooter, thou I'm sure the reason would happen for any scooter. Thanks
@juliebrooks55993 жыл бұрын
Hi Tom I really appreciate your videos well done... Q: with the brake unit disconnected off the engine should the engine at least turn over?x
@tomjacques43 жыл бұрын
Brake still has to be wired up and and have no issues
@ballkeeper66623 жыл бұрын
have a tga breeze s4, steering loose someone said they do that an there easy to adjust /tighten
@juliebrooks55993 жыл бұрын
Also how do I check, have you done a video, to see if my motor is okay on my scooter? Even though I've taken the brake unit off it? X
@tomjacques43 жыл бұрын
Hi yes have done one redo it’s one of the first ones
@zorbzzsterio64062 жыл бұрын
your videos are the best. fully informative from the start with no bs thanks heaps im addicted :)
@CRANWELLPOACHER3 жыл бұрын
Hi Tom. Could I ask a question please? I have a gogo ultra ( 3 wheel) which will not move and emits 7 beeps. According to the user guide this relates to the wigwag/speed control. I have checked and replaced both. I also carried out continuity between control pod and control box.Could this be a control box issue ? Any way of checking it ? It is an S-drive unit . Thank you
@burstgaming93543 жыл бұрын
Hi Tom: My scooter go go elite moves well, --forward and reverse- and the charge looks full. But when I start it, sounds a CONTINUOUS beeeeeeeep that neves stop unless I turn off the key. So if I start and try to move forward o reverse, the scooter moves well but always beeping. Can you please help me ? I really will appreciate your help.
@tomjacques43 жыл бұрын
Check the horn button
@chrisandwendymortlock Жыл бұрын
Hi Tom, I have a king cobra, not been used for 6 months but I charge it every 2 weeks, it all works fine but suddenly the charger will not charge the battery and there are no lights or indicators even though you still get the bleeping if the indicators are switched on and the panel lights up when I turn on the lights, but none of the actual lights light up, can you help
@tomjacques4 Жыл бұрын
Check fuses
@chrisandwendymortlock Жыл бұрын
Thanks, it was a corroded terminal that had blown a fuse
@RobbieBear-hi1fo2 жыл бұрын
Can you do a green power video on what to do when it doesn't engage the drive to make the wheels go round please. It would be so awesome. Many thanks, Robert Bear, Reading
@tomjacques42 жыл бұрын
Do not touch these so called scooter products, dangerous if you ask me centre of gravity far too high so many people have fell off them goi g Roy d corners.
@juliebrooks55993 жыл бұрын
Got it working now yeahhhhhhh...the only thing is when the emergency brake thing is on it makes a SCREAMING NOISE doesn't it well I put it all back together and no matter if the brake is on or not its screaming!!! HELP lol...im thinking it's because I've put the brake unit on the wrong way is that possible? X
@tomjacques43 жыл бұрын
Well done 👍🏻
@tomjacques43 жыл бұрын
Remove brake and see if the disc is moving when applied
@juliebrooks55993 жыл бұрын
@@tomjacques4 sorry I'm so not use to doing DIY and mechanical things lol...please expand with what's turning lol..? X
@windsorrocks3 жыл бұрын
Great video. Bravo!
@blackdotkiller13 жыл бұрын
Another Great helpful video mate 👩🦼👍
@stephenmaas87755 ай бұрын
Hi, great vids! i've enjoyed watching a few with you fixing them today after my mums Invacare comet stopped working today, I thought it was the latch gear for pushing or putting into drive as when I messed with it a few times and started the scooter again it went forward and back but straight away the scooter wouldnt work again? I took cover off and had a wee look and thought it was the switch but on further delving I found a burnt connector not so bad but pretty similair to this video but I think the cable came from the break/latch side end.. I didnt check the brushes as I didnt know anything about these scooters until watching your imformative fab videos! I think I shal check them tommorrow! I noticed in another video that you use a fibre glass pen to clean, do you not ever use electrical contact spray to clean out these parts? also in another video you mentioned your Whatsapp number but I got carried away watching more of your videos 😂 could I please have your whats app for advise and also if i need to order any parts please!
@tomjacques45 ай бұрын
WhatsApp number 07713297096
@deedee12386 Жыл бұрын
Did cleaning the terminal make it work ? Thanks
@tomjacques4 Жыл бұрын
Hi sorry 😞 can’t remember if you watch the whole video you will find out
@deedee12386 Жыл бұрын
@@tomjacques4 hi thanks for your reply mine has fault code 7 unknown fault please contact dealer can you advise me on this fault thanks
@tomjacques4 Жыл бұрын
@@deedee12386 Hindi yours is fitted with an S drive then it’s: A throttle trip is indicated. Make sure that the throttle is in the neutral position before switching on the scooter. Check all word and ensure throttle is centred
@deedee12386 Жыл бұрын
Sorry to be a pain i have a left and right lever on the handle bars are they the throttle ?
@tomjacques4 Жыл бұрын
@@deedee12386 yep 👍🏻 Sure is. one for forward and one for reverse
@peterhough4712 Жыл бұрын
I am thinking of buying a mobility scooter from green power one of these 4 wheels fastes scooter is it very expensive for parts
@tomjacques4 Жыл бұрын
I personally do not work on them I can’t get parts for them I have heard lots of people struggling to get there’s repaired. I don’t thing they have a dealer network around the UK 🇬🇧 but could be. Wrong. Best phone them and tell them you have one and need it repaired and ask them the lead time or your nearest dealership. personally think they are far too high of the ground have heard people coming off them as centre of gravity too high. They are cheap compared to the real thing. We sell lots of different types of scooter than can be repairs all over the UK. You will need to speak to them. Best of luck 🤞🏻
@peterhough4712 Жыл бұрын
@tomjacques4 I took your advice and I have just got a Rascal Vecta sport scooter are part experience for them
@peterhough4712 Жыл бұрын
I have just been out on the scooter and it is making a lot of noise like the brakes are on can you please tell me how to check it it is that please
@tomjacques4 Жыл бұрын
@@peterhough4712 is that in the green power one ?
@peterhough4712 Жыл бұрын
@tomjacques4 no it's the Rascal Vecta sport
@AndrewBryantPianoTuner3 жыл бұрын
Hi I recently lost all my keys is there any chance you know how to replace my scooter keys my friend
@tomjacques43 жыл бұрын
Hi yes we have plenty of keys www.nithsdale-wheelchairs.com/scooter-ignition-keys.html
@erkanmaller96953 жыл бұрын
👍
@juliebrooks55993 жыл бұрын
Hi Tom I don't know how to add photos that you want from my last comment? X
@tomjacques43 жыл бұрын
Can you send via WhatsApp app or email
@juliebrooks55993 жыл бұрын
@@tomjacques4 yes if you give me your email or and phone number? X
@tomjacques43 жыл бұрын
@@juliebrooks5599 if you head to our website you will find the engineers number and our contact email address
@HughMcphelim11 ай бұрын
I charge my scooter all night and I don't even go a couple of mile and by the time I get home the green light is off
@tomjacques411 ай бұрын
Better get the batteries tested before purchase as there could be other problems causing battery drainage