03-06 Chevy Silverado Power Window Power Door Lock Conversion.

Ok guys thanks for watching. Here i add a universal door lock and power window kit to the 2003 chevy silverado single cab work truck package to give it a more up to date apperance. Really easy install compared to trying to get all original parts and it is very affordable as well. Here are the links below for the products i used. ENJOY....
2 WINDOW POWER WINDOW LINK
ebay.us/YamP9t
4 WINDOW POWER WINDOW LINK
ebay.us/ruFZ5x
DOOR LOCKS LINK
ebay.us/YVqoQ7
Be Sure and follow me on Instagram at / drivenbygears ☑️
/ drivenbygears 😜
Keep It SImple, Keep It Sweet....

[@NoNamesGiven_]

Very well done! I did this job to my 04 civic base model, took me 15 hrs and some help from my dad. Nothing quite like power windows! Cheers!

[@DrivenbyGears]

Nice work!

[@Sip28]

Where did you hook up the power source?

[@NoNamesGiven_]

@Sip Vids I used a fuse tap and hooked it up to the ignition coil fuse. That way my windows were only powered with the key in the ignition.

[@Sip28]

@@NoNamesGiven_ I’m so stuck because I wanted to use a fuse tap but they all said 10amp maximum

[@NoNamesGiven_]

@Sip Vids The ignition coil on my civic was 15A, and it was fine for two years. It was just powerful enough to handle the drive window, the passenger side window got stuck sometimes, I had to reach over and physically pull the window up while pressing the button. It's a good kit for $100. I had to scrap the car two months ago, too told and too many problems. I miss it so much still..

[@jewllake]

This guy took his time and put pride in that aftermarket kit and made it look good.

[@DrivenbyGears]

Thanks

[@thegamingchanel100]

Thank you so so so much, I just bought a 03 because it was a good deal the owner before me already converted it to power windows but I wanted to do the lock and never knew how. This helps quite a bit and will defiantly be looking at this in the future!

[@DrivenbyGears]

No problem

[@charlielowell4077]

Great video. Thanks so much for showing where you got the 12V for the batt & ign supply! So many videos exclude that. You're great!

[@Pitman556]

What's the tan box called he pulled the power from? I want to buy a plug that fits if I can

[@Macetrow]

Coming here 3 years later, thanks for the video! Came here to see how you modified the door panels for the switches. Will be doing this on my 01 Sierra 2500hd

[@martinhollins7727]

Just gave me the motivation I need to go ahead and pull the trigger to do mine!

[@DrivenbyGears]

Oh yes

[@LesterSuggs]

Thank you for putting this video together. I have to do this same kit on my 2006 Silverado WT.

[@DrivenbyGears]

No problem thanks 4 watching I actually have more then 1.

[@rickbalderas4033]

Same here, just got an 06 regular cab for a good price. However it has manual windows :/

[@DrivenbyGears]

Happy Sunday!!!

[@MrBritrider]

Good video thanks. I have a 2010 reg. cab all manual door stuff. My manual door locks are not like your ‘03 mine are located on top of the door panel and pull up open push down lock. Will this lock mechanism work for me?

[@brian1275]

Hello,I put the same kit on my truck but only go Down the window but wend is goin Down it only raises it halfway and it stays stuck.

[@jimmarchman]

Good video. Wish I would have found this one before I started my install. Luckily I'm less than halfway through so your pointers will come in handy. Thanks!

[@DrivenbyGears]

Nice

[@jimmarchman]

@@DrivenbyGears So, I grounded out something in that little electric panel under the dash you hooked into. No power now and I can't find any info about that panel anywhere I've looked. Ugh.

[@DrivenbyGears]

@@jimmarchman look for a blown fuse

[@finallyitsed2191]

You did a great job explaining everything and with your filming in this video. Very helpful, thanks!

[@DrivenbyGears]

Glad it was helpful!

[@sevas1224]

Nice video man! Thumbed up and subbed. Could you make a video on how to install power side mirrors? I imagine the same thing but still be cool to see.

[@DrivenbyGears]

I'll see what I can do thanks 4 watching

[@95ckemper]

Hey man just wondering how the power window kit was holding up after a year. Thinking about doing this soon!

[@starfishbandit5633]

Just buy two doors from a junk yard that have the power windows and door locks and move the lock from you're truck. so much easier than modifying your doors with a kit.

[@gabrielrosalesprieto9969]

@@starfishbandit5633 thanks man was thinking it was easier but dont see many people doing it

[@justind9631]

@@gabrielrosalesprieto9969 yea it would be way easier than doing this

[@wippywoppie123]

@@starfishbandit5633how would you wire it all up? Just new to this kinda stuff

[@shuy2865]

Man, that was a very good installation. Thanks👍🏽

[@gumarovenegas175]

great video man very well explained do you know if this kit would work on a 2000 silverado?

[@antoniorios9208]

Were did u buy the kit brother ? Thanks looks perfect

[@DrivenbyGears]

Look in description above there is links. I bought on ebay. Thanks 4 watching.

[@M0NKEYYMAN]

Hey man I having a hard time finding the parts I need to change it could you make new links for Amazon because 2 of them don’t work

[@Raulb1377]

Where can I find the complete kit? Windows and locks? Or did you buy then separately?

[@Pitman556]

Can you still unlock with the key and the interior door lock? After you installed this actuator?

[@DopeTheft]

Definitely doing this soon 💪‼️🔥

[@FlatBrokePerformance]

Did you trim anything for the locks? I installed the same actuators in the same exact spot but they are rubbing against part of the door panel I believe, I can barely move them by hand.

[@billy2423]

Have a 2004 manual doors and bought 2 auto power windows w/locks doors complete. Will the wiring harness just plug and play?

[@brickhouseconstructiondesi8051]

Nice . I went to the junk yard and found a 2006 Silverado identical to mind . But it had power windows . I removed all the power windows the electrical harness . and I got home to install it and the power harness configuration was different on my vehicle can you leave me a link to where you got your universal kit from thanks

[@phillipblades6784]

I have a 2005 Silverado regular cab base model. I think I would just need to make mine look just like yours. I’m trying to upgrade my truck to the LT level. Power windows are a must have for my project. I just can’t afford all the OEM parts. Videos like this are my inspiration for sure. You show me what to do and how to do it. That is, without spending a boatload of money on the OEM parts or having to reprogram the truck’s computer. Thank you. Edit: This just occurred to me, could I just buy the OEM door handles, with OEM switches and use those switches with this kit?

[@anthonyduarte6001]

How did that work any luck with the oem switches?

[@phillipblades6784]

@@anthonyduarte6001 I was just asking a question myself. It maybe 2 or3 years before I can save up the money I need for this pickup project. I was asking if I could just use the OEM switches so it would look more stock. It’s on hold right now for sure.

[@Tieigo0]

Yes you can use OEM door cards with the OEM switches, you just need to poke to see which ones are the lights and the up and down. (Two connectors for the up and down, two connectors for lights, when you turn on the headlights)

[@1Corinthians15.1-4]

​@@phillipblades6784 Yeah you should be able to. Every power need requires positive and negative. You could even cut off the OEM switch and replace it with another to make the connections fit better. Manufacturers all like using their own switches to make it more difficult to modify but it's all the same positive and negative.

[@harleyserrato6908]

This kit doesn’t need a relay for each motor in the power window units?

[@Itsme83.]

What if I wanted to add courtesy lights? What wire would I tap into for that? My work truck has no lights or dome light

[@rafasantana1188]

I have a 2002 saw. I'm gonna be cool about the change, but I just want to know what the kit you bought so I don't get wrong when I ordered it

[@DrivenbyGears]

Link in description

[@RaineLutz]

How have these been holding up? Debating grabbing a set or getting a new truck but I'm worried about how long they'll last.

[@nbsted]

So we’re you able to to have both switches on the driver side and then a switch on the passenger side aswell?

[@Cesaraguilar-e9p]

Quick question why not switch over an electric oem window motor ?

[@LesterSuggs]

Where did you mount the door lock radio receiver?

[@tamonthompson7599]

Do do do an excellent job demonstrating

[@M0NKEYYMAN]

Am I still able to unlock the door with my key if my battery dies

[@MiguelSanchez-rb3tw]

I have the door poppers cuz i got an alarm installed. Do you think theres a way to wire the original unlock buttons on the inside with the poppers? Gets annoying opening passenger door lock from the inside. Mine automatically lock when the truck turns on

[@702xRyder]

Nice I'm a do it on my 04 just the power windows

[@ryanbuck5253]

What are the few minor issues you speak about at the end? Why do you not tell us? I would sure like to know.also what about rolling it up and down, will it blow the gears off it if you hold the button down after it all the way up or down?

[@DrivenbyGears]

Only minor issue was getting door panel back on , and no it won't if hold button down

[@PROATV13rb]

@@DrivenbyGears thats to funny. was it the door lock?

[@DrivenbyGears]

@@PROATV13rb yea there is a hold post right in middle of that door actuator but it didn't hurt anything.

[@ryanbuck5253]

Driven By Gears how is it holding up?

[@DrivenbyGears]

@@ryanbuck5253 great I've had it on my obs for years never any problems plus its a cheap kit in price. Try to go cheap with oem stuff and see how the figures turn out.

[@Hobson92]

Installed it all today, everything works great except my key fob is backwards. Any advice?? Tried flip flopping green and blue wires and it didn't matter.

[@DrivenbyGears]

Got make sure we're you mounted the sliders that when hit the key fob unlock its actually unlock on door too or it will be pushing in wrong direction if you know what I mean.

[@LesterSuggs]

My window motors have pink & yellow wires and the switch harness has blue & green (like yours). Can't figure out which goes where. Also the switch wires can connect to the switches in either direction. I'm not liking my kit.

[@matthewf3459]

Do you think it would work on a chevy car? because i have a 99 chevy prizm with manual locks and manual windows and i would want to make sure it would fit before buying. thanks!

[@DrivenbyGears]

This is a universal kit that will work with and roll up windows

[@michaelcastro6505]

So say I want to change my truck into power locks but i already have an a alarm system how do I get them to run as one?

[@gabrielrosalesprieto9969]

Does the duze with the power windos keep on burning with u??

[@rinku8260]

Did the key fob come with the actuator’s or did you get it separately?

[@francis5944]

Nice work man.

[@mariahadams972]

Is there a wiring diagram that you used? Mine didn't come with one.

[@DrivenbyGears]

Yes

[@alfredoreyes8661]

@@DrivenbyGears do you have the wiring diagram mine doesn’t have it either

[@DrivenbyGears]

@@alfredoreyes8661 I'll see if I still have it . It's been awhile since I did this mod

[@gregoryseals1]

I have a 2001GMC Serra single cab. Where did you order your kit?

[@lacopina8689]

What if my truck came with manual windows and I bought oem doors how do I wire them up do I use the same wiring that comes with the kit

[@DrivenbyGears]

Get oem harness from junkyard

[@brandongrover1168]

For mounting the door lock actuators, did you drill holes? And did you use the screws that came with it to mount?

[@DrivenbyGears]

Yes had to drill holes, did you watch video?

[@brandongrover1168]

Driven By Gears I did, must have missed it! Pretty loud environment where I’m at. Thank for the super quick reply :)

[@DrivenbyGears]

@@brandongrover1168 yea I positioned it about were it was good and took small bit and started the holes definitely use a hand screw driver on the cheap plastic when thread the screws

[@franksilva3302]

How’s it holding up?

[@Itsme83.]

Where and how did the key fob receiver hook up? Thanks!

[@javiercruz7388]

Awesome just what I needed you the man!

[@DrivenbyGears]

awesome np

[@reidbridges2488]

Hey im very new, could you tell we what each wire goes to color by color?

[@eleazar7962]

Will this work for a 99-02 Chevy Silverado? Great vid btw 👍

[@DrivenbyGears]

Yes sir the door lock might be in different area but yes.

[@juanmoreno5187]

Have you did it on 99 yet

[@DrivenbyGears]

@@juanmoreno5187 no but I have a 95 obs but the windows will be the same.

[@juanmoreno5187]

Driven By Gears oh alright thanks

[@jeylaw3893]

There's 2 Brown wires in that kit for the lights , did u connected them?

[@DrivenbyGears]

Yes

[@DrivenbyGears]

Why you need power from the key or you will run battery dead

[@PROATV13rb]

have you seen the a1electric.com kiT? GM83-109A-K? ITS $244 BUT LOOKS LEGIT LIKE THE STOCK SET UP/

[@DrivenbyGears]

No i havent..

[@fcamtero]

how is holding up today since you installed?

[@juan14964]

Really good video & great job

[@luisgodinez162]

How do you search for and where did you bought it from please?

[@josequintero7632]

Do power locks need to be closer? I have them where you had put them but mine dont lock or unlock idk if i need to be even closer?

[@DrivenbyGears]

Got it to tight? Make sure tighten them in right direction

[@orlu5867]

That location blew my SEO IGN 10 amp fuse under the hood the next day and the window kit runs an inline 30amp fuse. Did you have to same issue ?

[@DrivenbyGears]

Did you hold the switch down or try to roll them down same time?

[@DrivenbyGears]

Just move it to a 30 amp spot

[@alejandrogerman4984]

Can I connect my viper alarm with the power locks?

[@Dylanmarsh00]

So I installed mine and it’s having a really hard time rolling the windows up and down. Any recommendations on how to loosen it up?

[@jameshuban6515]

That's what I'm scared of. My windows on my 2000 Silverado are very "snug/tight". Especially if they aren't operated on a regular basis. I'm scared those motors and gears aren't strong enough. My brother had a similar problem in his 88 Bronco. The gears would strip.

[@xNawfy]

squirt some wd40 on side of window channel where the windows slide down

[@alexvillagomez482]

looks great, man. Do you happen to know if there is a way to program it with a different keyfob?

[@DrivenbyGears]

That I don't know.

[@stevecorner5069]

Did you have to use relays in the wiring for windows and locks for reversing the power?

[@DrivenbyGears]

Its all included in the kit no extra parts needed.

[@stevecorner5069]

@@DrivenbyGears Thanks for the reply. I assume that you did have to use relays for the windows and locks, although I didn’t notice you mention them or see them in the parts that you had laid out on the tailgate.

[@DrivenbyGears]

@@stevecorner5069 im guessing its in that little box that comes with it or maybe built into the motors

[@stevecorner5069]

@@DrivenbyGears Hmm...... mine didn’t come with any little box thing, just the wiring and switches. Must be some magic in the box that you have, as something is required to reverse the polarity for windows up and down. It looks like I will have to get some relays to make it work. Thanks for the reply and the video you posted. It will help me to locate the best spot for the motors and door lock actuators. Cheers!

[@stevecorner5069]

Update. Just found a video from Lessco Electronics that explained the need for relays. If the switches are 5 pin, they can be installed with or without relays as the switch has the capability to reverse the current. Turns out my kit has 5 pin switches so can install without relays. Hope this helps others and thanks for your assistance and for providing the video. Cheers!

[@jorgesosa-tz3sr]

for a power window....just go the yunke yard and buy a motor window from any suburban and find the right wire in amazon...

[@ethanreddish5542]

How did you install the window regulator

[@skylerhitchcock4896]

Can I use any key fob? I have a aftermarket 2013+ style key fob for these model trucks lying around and I just picked up a 2006 2500hd and I want to convert it but I’m wondering if I would have to use the provided fob

[@DrivenbyGears]

idk

[@jimmysupra5881]

Do you know if you can use stock buttons for the windows instead of putting in your own?

[@DrivenbyGears]

Idk wouldn't hurt to try

[@jimmysupra5881]

@@DrivenbyGears thanks for the quick reply appreciate it. Also another question how did you get the wires through the middle tube on the doors is it open and you just stick the wires through or is there anything you have to do?

[@DrivenbyGears]

Clothes hanger feed it threw the boot tape wires on one end pull them into boot to other side.

[@jimmysupra5881]

@@DrivenbyGears holy crap that is smart lol. There’s no cover on the boot correct? It’s just open

[@DrivenbyGears]

Correct

[@typicaltiller2594]

Can you change the key fob after installing this or do you have to use the one it comes with?

[@DrivenbyGears]

Idk

[@anthonyduarte6001]

Is it possible to use oem switches with this kit?

[@AlexRodriguez-oh5eo]

Would this be the same for an 2002?

[@jamess9208]

This is awesome. Just got one of these gonna do the same thing. How much do you think you saved just buying the kits verse taking it to someone?

[@DrivenbyGears]

Shoot probably 1000 dollars

[@jamess9208]

Love it. Thank you so much. God bless and have a happy new year 🥳 will definitely be watching more videos in 2021

[@jesusprado9048]

I wanna do This to my Chevy Silverado 2002 extended cab but I wanna go convert back to manual .

[@dontworry8669]

I I talked this not to log ago but then one motor messed up I recommend for you to take it so they can install it like if it was oem

[@DrivenbyGears]

I've never had problem

[@dontworry8669]

Driven By Gears it was only one I am going to buy another kit cause the other one works good

[@DrivenbyGears]

@@dontworry8669 if you install them in a bind they will not last long plus need lube up your tracks and window mechanism so can move freely.

[@codydonovan7356]

Will this work on an 2002?

[@rodolfocaraveo8642]

If you use the driver’s switch to pull down the passengers window does it work?

[@DrivenbyGears]

the driver side has two switches for left and right the passenger side only has the one for the right side.

[@aldorodriguez4883]

Where did you get that kit i wanna do that to mine

[@miguelgutierrez8628]

If I want to switch to electric windows do i have to buy the locks and controllers too ?

[@DrivenbyGears]

No you can just get window stuff

[@juanmoreno5187]

Good shi* I’m about do it on mine and I’m going put it where you put yours lol

[@DrivenbyGears]

Yes sir and the switches look like factory

[@TheOnlyWTF]

Hey, great video! Where did you install the main unit that came with the kit?

[@gmctx5487]

Some good info.Keep it up brother👍

[@DrivenbyGears]

Ty Sir

[@Retro_Fan]

Can you please update the link to the power locks?

[@matthewsalvador9783]

How would I convert my automatic windows to manual?? Reason being done tired messing with switches

[@DrivenbyGears]

Just find a donor vehicle

[@Eric-pi8hi]

Would this work on a 03 Silverado single cab but I have Manual windows but my locks are power

[@DrivenbyGears]

Yes it will

[@JOE-fy9nj]

I bought the same remote set up as you but one of mine fobs broke so I was looking to buy the same kit but can’t find it. The link in your description isn’t the same fob that me and you have. Do you know where I could get it?

[@DrivenbyGears]

Did you search on ebay?

[@dairamacedo9148]

I have a 06 Chevy with manual windows, do you think I can just buy electric doors and connect them? Or is this my only option?

[@DrivenbyGears]

If got that kind of money by all means.

[@the_drifting_kings_1871]

Just get the door panels this looks ghetto asf

[@DrivenbyGears]

@@the_drifting_kings_1871 it's not that easy there jabronie

[@the_drifting_kings_1871]

@@DrivenbyGears these trucks for the most part are plug and play a little research or some money for someone to get it done is better than having a non OEM looking door

[@DrivenbyGears]

@@the_drifting_kings_1871 yes door wise anyway but have you ever tried to dig out that whole harness under the dash??? But anyway.

[@ram1362]

Great Job 👍

[@nickalvarado4537]

Awesome video thank you

[@adambooth5067]

Did you have trouble getting the door panel on with that lock location?

[@RossPetrarca]

I am having trouble getting my panel back on with the solenoid in the location...

[@diegofurlong1199]

good job, looks great

[@DrivenbyGears]

Thanks

[@smalliebigs6784]

Great video! Does the kit you linked come with complete wiring instructions?

[@DrivenbyGears]

Wiring is pretty easy but yes it does

[@AntoineFinch]

Its to bad they dont have a 4 door kit?(power windows)?

[@DrivenbyGears]

They do its on ebay

[@nathanieltorrez8167]

I can’t find a way to power it, I have a 2002 serria any help?

[@DrivenbyGears]

You use a meter check all the lower empty slots

[@KevinReyes-z7o]

Where did you get that kit

[@thomasaguerria3519]

Can you connect the power locks to another key fob? I just ordered a Compustar 2WG15R-SS Pro remote among with the other things for remote start and security system. I didn't realize that I needed to install power locks, ik how dumb can I be? I want to just get the power locks to complete the setup, but have yet to find any that say they can connect to another remote. If anyone knows, please help me out.

[@DrivenbyGears]

Well the brain for your new key fob should have power wires for power locks so just splice that into the brain from the power lock kits and they both should work. Or use it as a stand alone brain.

[@thomasaguerria3519]

@@DrivenbyGears thanks. I think I actually understand this

[@chrismort8332]

When I did this in my 07 classic my windows were super slow, do yours roll up and down fairly quick?

[@DrivenbyGears]

Yep got lube the tracks stuff dries out

[@miguelesquer]

Mine too, so I took them off, do not know if I can install an EOM ones with the some wiring

[@toe951]

Where did you buy all the stuff for it?

[@gregoryeighmy5239]

Does it come w a switch for the passenger side?

[@DrivenbyGears]

Yes there is even a 4 door kit

[@angelom.7823]

Caro amico mi chiamo Angelo da Italia ho visto il tuo video che mi è stato utile ma ho un problema con la mia Aveo 2012 non riesco a trovare il filo della porta sinistra che da il segnale alla chiusura che poi attiva la power windows closer. Mi sai dare quache aiuto? Grazie molto

[@DrivenbyGears]

English?

[@jermaineshumpert9860]

I hooked up my power windows the same way but for some reason I keep popping the fuse from time to time. Any idea why?

[@DrivenbyGears]

Loads to high for that fuse. Got pick different spot