Very excited about recent developments in survey drone mapping. I remember a professor in a photogramatry class 10 years ago telling us drones were the future and we laughed at him. Guess we weren't as smart as we thought!
@SteelCityDrones5 жыл бұрын
Thanks for the input and feedback.
@CarterLamere4 жыл бұрын
Is there an example video with a drone in flight mapping out an area? Great information by the way. Thanks!
@matthewjames42682 жыл бұрын
So if you have the rtk with ground station do you still need control points?
@SteelCityDrones2 жыл бұрын
There are a lot of factors that go into that. One thing you definitely should have are check shots to validate your data. You can have the best data but if you can't validate it, the data is useless. Check shots are taken from Trimble Rovers that most engineering companies use.
@matthewjames42682 жыл бұрын
@@SteelCityDrones thx
@mmong6266 ай бұрын
can i mark points with remote m300 rtk and rtk base station without aircraft?
@SteelCityDrones6 ай бұрын
Which points are you referring to? Ground Control points are independent of the M300 and base station.
@mmong6266 ай бұрын
@@SteelCityDrones I need to get the ground point and don't need M300 on. Use only smart controller and D-RTK 2 base station
@1116media6 ай бұрын
@@mmong626 Ground control points have nothing to with the M300 on or off.
@cmdrefstathiusplacidus90032 жыл бұрын
So I just passed part 107, practicing this with a anafi thermal and trial of pix4d. I am noticing even after calibrating the drone where the flight path overlay and the map of my house from wherever it's getting the satellite imagery is offset by like 10 ft. Not sure if it's the GPS on the drone being not accurate or satellite imagery of my house that is offset. It's also missing the sides of my house but it is working mostly.
@SteelCityDrones2 жыл бұрын
It's not uncommon for projects to be off 10-40 feet if you do not use Ground Control points. And the only way to really validate your data is to use Check shots using Trimble hand helds.
@pooriaemtenani7044 жыл бұрын
First of all, thank you for sharing this great information. But I have one more question. What is the difference between Areopints and Reach? It would be my pleasure if you can help me to know the difference between these two systems.
@nooraldayemyahia70132 жыл бұрын
it is so excited
@DavideTorchiaPh5 жыл бұрын
Wow! 🤩
@jerseyshoredroneservices225 Жыл бұрын
I didn't understand the part where they said arrow points are useful for relative accuracy. The way I understand it, drone maps are relatively accurate without ground control. Ground control (AeroPoints) is useful when you want to put the Drone map on a particular place on the earth, which is absolute accuracy.
@SteelCityDrones Жыл бұрын
I watched this again and I did not here Steve say that. He explained the difference between relative accuracy and absolute accuracy.
@jerseyshoredroneservices225 Жыл бұрын
@@SteelCityDrones 2:07 "Rtk is important for absolute accuracy and ground control points are important for relative accuracy". Am I misunderstanding something?
@jerseyshoredroneservices225 Жыл бұрын
@@SteelCityDrones Also, at 1:55 he says that "the relative accuracy is where a point is on this globe and relative accuracy is..." He said relative accuracy twice. One of them should have been absolute accuracy unless I'm misunderstanding. something. Thanks for reading these comments and taking the time to respond 🙂
@SteelCityDrones Жыл бұрын
@@jerseyshoredroneservices225 Absolute accuracy is a point that's a specific spot on earth, relative accuracy is a point that's accurate compared to other points around it.
@flyingcamera214 жыл бұрын
thank you for your informs~~
@Guide5045 жыл бұрын
6k ??? Why would I not get a rover
@SteelCityDrones5 жыл бұрын
On average, you can pay a survey tech between $1000-$2000 per job to lay down ground control points. If you do 3 to 4 mapping jobs the portable control points pay for themselves. In addition, you can use the Portable GCP's as a reference check shot that you can calibrate the base station, and or use additional check shots to validate data.
@Guide5045 жыл бұрын
@@SteelCityDrones not in the UK.... If your lucky get a student or trainee and probably for around £180. Things are not the same the world over.
@SteelCityDrones5 жыл бұрын
@@Guide504 Sorry your reply is not understandable.
@Guide5045 жыл бұрын
@@SteelCityDrones slang for cheap intern in the UK.
@tacocat88674 жыл бұрын
Recommend you call them Temporary control points. -A surveyor.
@armorvestrus41192 жыл бұрын
The key phrase here is " you have to pay a Surveyor", when AIs take this over standard surveyors will be out of work...
@SteelCityDrones2 жыл бұрын
In the United States it is illegal to advertise "survey work" without being a licensed surveyor. Survey work is considered to be line work, CAD deliverables, and a stamped seal signed off and certified by a licensed surveyor. Most people don't have a Trimble R10 that can set Ground Control or Check shots so they pay a survey tech to collect that data for them.