Tear Down Inspection // Skyzone Sky02x vs Aomway V1S

[@DroneMesh]

Skyzone Sky02x bit.ly/2HznbhJ Aomway V1s bit.ly/2HQ3ukL

[@riverbankmactavishmcghee4573]

More like this for sure. Thanks for the effort and honesty. I ordered the Sky 02c after your initial testimony. Thanks. The other badass, outlaw youtuber that takes stuff apart and exposes the bits and pieces for us is Bruce Simpson from New Zealand - RC Model Reviews and XJet. Wishing you well from Canada, Cheers.

[@power-max]

3:08 Those are MLCC Multi-Layer Ceramic Capacitors. Tantulum capacitors offer higher capacitance for a given size but are polarized (only suitable for use for DC blocking and DC filtering, or application where the voltage never goes negative) and have higher ESR than MLCC, generally speaking. They also tendancy to go short-circuit and explode in a fireball when pushed beyond their limits. MLCC have other weird properties (capacitance changes with voltage and tempurature), can have reasonably high capacitances (although good ones are expensive)

[@jimbob6063able]

Great video dude! Saving up for skyzones

[@breakalegfpv9532]

I just ordered the 02c , I use FXT viper for 2 years, wish me luck switching from boxes. LOL

[@Sergeant898]

😬 You connected the skyzones ground wire to the PCB wrong and looks very close to touching another component. Loop it around the SMA connector. Skyzones quality and PCB design looks vastly superior to Aomway, and fatshark. It's so neat and well integrated.

[@rajeevgopal1394]

Sir nice teardown video. I got my new 02C couple of days back. Few powering my power button got stuck. The click is gone. Now i have take off the batt plug to off and on the goggle. Iam not able to switch off the fan aswell. What can be done sir. Can i open it as u did and clear it or ask BG for a replacement? How to take off the face plate ?? Pls help iam stuck with my new goggle

[@MCsCreations]

Pretty nice job, dude! 😊 Both looks great. 😊

[@Fpvfreaky]

Drone Mesh this it like goggle porn😂 I’ve just ordered the new skyzones. 👌😎

[@billdor121]

So, I bought the v1s goggles like the first day they came out.... Then all three other goggles hot the market like 3 days later (at least that's how it seemed) how mad am I going to be at my purchase?

[@DroneMesh]

I'm not saying the aomway is bad at all. But no matter how I record it it always seems that way but in reality it's a good goggle but the skyzone is slightly better in terms of lcds and just overall build construction. I bet the DVR is possibly alot better on the Aomways.

[@billdor121]

@@DroneMesh so looking at this video.... It doesn't seem impossible to make the aomway take a rapid fire module... Could the input ribbon cables, or their input pins be highjacked to take rapid fire instead of the, what I'm assuming, is a regular 5808 module?

[@billdor121]

@@DroneMesh obviously there would be some cutting on the outside to do

[@dinholimno]

I feel your pain man...did exactly the same thing.

[@billdor121]

@@dinholimno been a tough week eh?

[@badumtss3318]

Can the skyzones be powered using the micro usb port? Thinking of using a powerbank instead. Awesome teardown btw, really helpful. Thanks mesh!

[@patricklangdon9129]

No they cant. Even to get a connection to a pc through usb you still have to have a battery to supply power to the 02x

[@badumtss3318]

@@patricklangdon9129 thanks for this! Appreciate the response.

[@bennieleip579]

11:57 😆😆😆 you weren't asleep 😆 you knew how that sounds 👍🏻

[@power-max]

DVR's are usually shit because they use: a) old compression algorithms and containers like MPEG, AVI, etc. b) not nearly enough bitrate to store the FPV in a visually lossless way c) may not store frames that were completely lost due to the interference and I suspect the cost of engineering a specific ASIC just for FPV dvr (where the signal quality varies wildly) is just too high for too little reward. There are already chips on the market that do the job cheaply and poorly, but still well enough they don't justify engineering costs for building one optimized for FPV and quality.

[@h2o-fpv623]

People probably have the same issues but not everyone is going to open them.

[@cprogrck]

I can't tell but they could also be smd chokes. I'm not sure why'd you put a fuse there but I could see a choke in there maybe to do filtering or impedance stuff.

[@maxiemusfpv198]

Half of the time was Drone mesh geeking over components lol, same here electronics is so interesting

[@trfpvVT]

I thuroughly enjoyed that. Thank you.

[@adrianantones4909]

Damn i miss this guy

[@mihavuk]

As much as I can see, you can replace receivers on Aomways. With a minor mod probably even use 3rd party receivers. You can't do that on Skyzones since there is only 1 huge pcb with everything on it. Therefore I would choose Aomways between those 2,despite stupid solution with that ribbon cable. Nice video, I like teardowns. 👍

[@DroneMesh]

No need for mod just av Input and the docking

[@deant6627]

Hi Drone Mesh, im going to purchase the skyzone 02X goggle and am just wanting to know if they have improved the DVR yet through firmware updates?

[@rebelquadronfpv1065]

Skyzone seems to have better build quality.

[@daryljohnlam9982]

Make a mod for the skyzone 02x please

[@LordFpv]

On mine sound don't work..I don't know where to look to fix sound.

[@AlexanderRibchansky]

Hello, DroneMesh! Have you try to contact Skyzone with dvr quality issue? If you have some direct contacts with them all happy and unhappy by dvr quality users of skyzone 02[x/c] will thank you a lot! :)

[@bennieleip579]

Is it worth it to buy a goggle like this if you got a boxgoggle ? (Image quality and if it less stress on your eyes )

[@rebelquadronfpv1065]

Yes and no. You need it try it before buying. Your club will help.

[@h2o-fpv623]

Great video

[@BuzZ.]

Whan the aomway stops working, don't even try to test the wires with the multimeter, just get a set of ribbons and replace all of them. Whan you lay old ribbon it flat it might work, but whan you bend it it might loose the connection and not work

[@DroneMesh]

The Man with the experience.. Keep it up buzz

[@wongong595]

I heard you mentioned you're a pretty experienced when it comes to tearing down an Electronic devices. You're touching those micro electronic (semiconductor) components. I just hope that you were grounded/discharged at first prior to touching the components to avoid failure due to unforseeable voltage spikes (aka esd). The reason I said this coz your vid did not either show or say that you're safety at first. Cheers!

[@gamaxgbg]

Very nice, a lot of points for Skyzone. I don't know why but i never really liked aomway even though i've never even touched any of their products

[@mickolesmana5899]

it is lego connector Jerryrigeverything told me to say so

[@pepsfpv1326]

Love video.

[@alexanderdrabenstedt6575]

6:38 it's called a mezzanine connector.

[@docfpv9569]

I don't see a problem with PCBWay With all the news about 5g in the US & UK government and UK air force getting pcb's made for f35 fighter jets What is your take on it all or is it all over hyped?

[@urdha_fpv]

Teardown x9 lite

[@trfpvVT]

Haha yes please

[@hunterjones9822]

Aomway looks like they used a rattle can to paint their goggles...

[@HDTube101]

Rofl.. I noticed that too but you are jumping to conclusions. He has used them for a while. Do you really think they came like that.. muhahaha..