Wonderful video. I love that it's right to the point, but still easy for a beginner to understand. Lots of these DIY videos either contain too much fluff that makes the videos 10 minutes too long, or they skip the "easy" things that they expect everyone to know. You did it perfectly. Thanks.
@basicworks13 жыл бұрын
Glad you enjoyed it!
@SeleneMoonBird2 жыл бұрын
I'm remodeling a trailer for my dad while also living in it. I've never lived in a mobile home and didn't realize how different everything is compared to a traditional house. Anyways, not the point. The point is this is my favorite video I've watched on doing Mobile Home/Trailer Repairs all because someone I think someone said SMIDGE. Seriously, I had to replay a couple parts a couple times because I couldn't stop laughing. Thanks for brightening my day and for helping me gain knowledge (and courage because after watching your video I feel like I can easily do this repair myself) on my path through a new, very bumpy terrain of mobile home repairs. --- Seriously though, did someone say SMIDGE??? Ha!
@basicworks12 жыл бұрын
Lol Thx! And the best of luck with any repairs you do!
@jeffmather15857 ай бұрын
Thank you for producing such an easy to follow video. The end result has turned out well for me. 👍
@basicworks17 ай бұрын
Thx! Much appreciated! Great to hear!
@timborocksloud3 жыл бұрын
Great video...well lit, easy to see...definitely a good tip to connect all that stuff before dropping it back in...so much more room and light to work (and more comfortable) before you drop it in and having to work underneath! I don't know if I would have thought of that...so saved me a ton of time and uncomfortable minutes!
@basicworks13 жыл бұрын
Glad it was helpful!
@teamdrummond6915 Жыл бұрын
Great work, Mr. Clyde. You jus5 earned a new subscriber. Great content!!
@basicworks1 Жыл бұрын
Thx! Welcome aboard!
@benjaminwolf82766 ай бұрын
This helped give some confidence for my wife and I to attempt this. We said ‘squidge’ a lot during it. Tomorrow the silicone dries and we see how well we did!
@supershwa272 жыл бұрын
Thanks Clyde! Great, concise video to watch before I begin my afternoon project!
@basicworks12 жыл бұрын
Fantastic! Thanks!
@sarvigil5876 Жыл бұрын
Wish you would have shown the part when you put the trap back on.
@rosariosanchez3235Ай бұрын
Thank you!!! Soooooo helpful!😁😁 Great sense of humor too 😂
@anilksingh6503 жыл бұрын
Excellent video to understand, thanks a lot for your hardworking and step by step instructions
@basicworks13 жыл бұрын
Glad it was helpful!
@davidminor12543 ай бұрын
Great video "Squidge"! Anyways, my bathroom sink is not sitting flush into the vanity top all the way around. The vanity top is old and needs replacing but I just noticed that there are hold down areas under the top for those underside sink hold downs. I wondered if I put those back on if my sink might sit flush again?
@downeastoutdoors8713 Жыл бұрын
Great video in the process of doing the same in my old 1983 mobile home. Mine also has a plastic type sink with those tabs that holds the sink underneath to the vanity top. I got a 53inch long by 22inch wide vanity in the bathroom. So the silicone is the only thing holding the sink in basically?? Love the video alot of helpful information. My old sink was a 20L by 17W sink
@basicworks1 Жыл бұрын
Sounds great! Yes Silicone will hold it in...no tabs..
@downeastoutdoors8713 Жыл бұрын
@@basicworks1 that's what I did. Worked great, thanks for the video
@JS-dz4bz2 жыл бұрын
great and straight to the point video, thanks!
@basicworks12 жыл бұрын
Glad you liked it!
@khuffmani Жыл бұрын
Done!! Thanks Hombre...
@basicworks1 Жыл бұрын
Very Nice! Glad this can Help!
@exfolios22 күн бұрын
If my countertop is stone, can I replace drop in sink with undermount sink?
@CitizenTurtleIsland3 жыл бұрын
Fantastic job. I am confident that I can do this now, even though I'm 59 year old woman with only a teenaged son to help. But I have 2 problems. 1) My sink cannot be centred and is not currenty, due to the position of the pipe underneath. So I think I should use an oval sink again, so this is a little less apparent. 2) I think they cut a hole in the counter that is a little too large for a standard oval drop in sink. Plus it's a sink with a rubber seal attached to the perimeter of the bowl, as it sits on the counter. I guess I'll have to take out the sink (which shifts already...yike) and see. Thanks again!
@slimdude2011 Жыл бұрын
You will have to use the same shaped sink that you had before, to fit the countertop properly.
@CitizenTurtleIsland Жыл бұрын
@@slimdude2011 Did the job last summer. I did two bathroom sinks and they look great. Thanks again.
@cristareid Жыл бұрын
Thanks for the walk through!
@basicworks1 Жыл бұрын
You bet!
@mybackyardparrots91982 жыл бұрын
One thing that would have been appreciated also - how to measure your replacement sink. Do we measure the hole, or the sink? Diameter, or side to side, top to bottom of actual sink?
@basicworks12 жыл бұрын
Measure the hole ..Cut out...To get a sink that fits that hole size...
@jesslong75 Жыл бұрын
Nice video! Ty. Can the water lines be attached at the same time before inserting on the counter?
@blockheadjessyt32973 жыл бұрын
You are a hoot!! Thanks for the clear, concise steps and helpful tips. I'm going to try this right now!
@basicworks13 жыл бұрын
Glad to help!
@sudaabelovedone Жыл бұрын
I am wondering if the quartz or porcelain countertop cracks during the replacement process?
@normarosario42698 ай бұрын
How do I remove and change knob Fawcett to the new Fawcett on second sink
@chriscunning883 Жыл бұрын
Hey, I followed your video, great video by the way. I am having difficulty with attaching the drain pipe to the drain, every time I try it completely lifts both the drain and the sink. I have tried multiple times. Any advice would be appreciated
@davidw991 Жыл бұрын
Great video. Helped me out
@basicworks1 Жыл бұрын
Glad to hear it!
@muhammadpervaizakhter9663 жыл бұрын
Excellent Work
@basicworks13 жыл бұрын
Thank you! Cheers!
@janiceargyle29522 жыл бұрын
Awesome tutorial! Thank you!
@basicworks12 жыл бұрын
Glad it was helpful!
@GasBikeFanatics Жыл бұрын
I was told to put plumbers putty to set sink not silicone can u use either?
@basicworks1 Жыл бұрын
Any Adhesive !! Yup!!
@hourlay9556 Жыл бұрын
*Perfect size!!!*
@M-n-Vacafornia Жыл бұрын
What is the brand and size of that sink?
@ndzinezamora7079 Жыл бұрын
Squidge!!!!! 😂😅😢😂👏👏👏👏love it, great video, thanks brother!
@basicworks1 Жыл бұрын
Thx!! Glad you enjoyed it!
@nicolewebb558 Жыл бұрын
Did you reuse those clips on the bottom or just the silicone on top
@basicworks1 Жыл бұрын
No place for clips on new one... Just Silicone!
@nicolewebb558 Жыл бұрын
@@basicworks1 have you ever messed with the double sink ones
@criscooper29743 жыл бұрын
You are funny! Thanks for the info…I think I can do this!!!