Nice video. Thanks for showing how you came to find out what to adjust too. Would love to hear more about the upa and it's scripts
@florenciomartinez36953 жыл бұрын
The upa clone in my opinion is better than original for some vehicles that need an immo off, this device is worth the money
@fuzzs89703 жыл бұрын
Hi Why do you say clone is better than original? Does the original fail?
@arthurpapazian60039 ай бұрын
thank you for being able to diagnose that voltage issue! you are pretty sharp!
@kur7154 ай бұрын
I tested mine today , all connected OK , but fails all tests , 5V and 3.3V , mine does not have a pot to adjust voltage though , any thoughts?
@contrerasmarc3 жыл бұрын
Great video, thanks DrShock
@personalgeorg3 жыл бұрын
As others write here - I have a red version of UPA, the resistor and adjustable resistor are missing. These lead from PIN 5, and I assume at plus voltage? I can create an additional bypass. Can anyone please measure the value of these two components?
@SarahKennedy-u8e2 ай бұрын
Would this work on my 2005 Chrysler crossfire I am trying to buy a cheap tuner and programmer just mess around with some things. I’ve never had one never use one, but I’m sure the software on the Internet is all the same because most them tell you to get on the Internet to get the software, I’m just wondering if that would work
@oldschoolmountainbike3 жыл бұрын
Thanks!
@user-xg1dy Жыл бұрын
Hi, I'm new to this. If I buy the clone version, I have to pay for the software capabilities? I want it to reprogram an airbag module with infineon XC2361A-72F, what adapters do I need? What I'm losing buying the clone vs original one?
@alexanderpascalforre21976 ай бұрын
Hi Dr. Shock, thanks for your video. I would do the test but can not find the Drivers. Where can i find the Drivers? Thanks
@DrShock6 ай бұрын
They should have come with your programmer when you bought it. I'm not aware of where they can be obtained separately.
@emcekTech3 жыл бұрын
Are you running UPA software on 64 bit Windows? Maybe you could make a video on proper install? I could get mine running on x86 only
@DrShock3 жыл бұрын
Yes, I'm running the very latest Windows 10 64-bit on the Lenovo laptop shown.
@emcekTech3 жыл бұрын
@@DrShock Would you be so kind to share a link to software install you used? Or elaborate more on how you did you get it running on x64?
@DrShock3 жыл бұрын
I honestly don't recall any problems with installing this. The uupa v1.3 I bought came with a little 3 inch CD-ROM with all I needed. The hardest parts were (A) the fonts are really small and I had to override that in Windows properties to run only the uupa app in a lower resolution and (B) you have to get this apps _unlocked_ files copied over manually from that CD. That last part did take a couple of reads of the readme to figure out. But I never ran into anything 32-bit vs 64-bit in the readme. Are you running the v1.3 one?
@emcekTech3 жыл бұрын
@@DrShock yes I am... And it crashes at runtime, that's why I asked. Thanks for an explanation, I'll try to get a different installation, maybe it'll work
@Nick-fi6qr3 жыл бұрын
thanks for this video... how many volt to the jack ac adapter? 5 volt as usb or more? many thanks
@DrShock3 жыл бұрын
12VDC/2A into the regulator is what I used. The original Elrasoft UPA programmer had a spec of 7VDC - 15VDC input to the barrel jack. No idea if clones support that range or not.
@SURGE1013 жыл бұрын
What would you use this device to program?? Thanks jay
@DrShock3 жыл бұрын
It's for programming memory devices used in automotive electronics. Such as instrument clusters, immobilizers, radios, and control modules.
@repairman54952 жыл бұрын
Is it possible to read nec d78f0515 mcu with upa?
@DrShock2 жыл бұрын
There is an NEC 78K0 adapter, usually paired with the TI TMS370 adapter. But there's no documentation about support with the 515.
@moeakawi18263 жыл бұрын
I dnt have adjusment voltage like your what I can do in this case ?
@DrShock3 жыл бұрын
I'm only familiar with this particular clone board design, the red v1.3 version of the upa-usb. Each of these clone boards are different in some ways.
@ing.josemanzanares531710 ай бұрын
Amigo logro resolver?. Tengo el mismo problema y mi upa no tiene ese ajuste de voltaje..
@fuzzs89703 жыл бұрын
Do you have any other videos on upa? Thank you
@DrShock3 жыл бұрын
No, not yet.
@OmniRepair2 жыл бұрын
Sir, could you upload the software installation? Thanks
@DrShock2 жыл бұрын
No, you have to get that when you purchase the programmer.
@OmniRepair2 жыл бұрын
@@DrShock i purchase the programmer online, i receive the blank cd 😀..
@housnihousni59272 жыл бұрын
I have now one downtown have a thing to turn . And it gives me a problem reading reset 0.78v bad . What can I do
@GARAGETEST2015 Жыл бұрын
Hi , I have a problem , when I turn on only software it's work , but when I turn on software and attach usb device , software wants key and user name . I don't know where I can find it .
@safetycheckspeedometerco.19093 ай бұрын
my 1.3 upa fails test 22 for pin 4 not at voltage and info on this ?
@khaledannane51612 жыл бұрын
Hi I had problem with my upa I need your help please