Full restoration burnt excavator | Awesome Excavator Restoration Project

[@re-fix9678]

very good😘😘

[@RestorationVideo]

I have watched many of this kind videos but honestly this one was more perfect and in detail

[@MUN.A1988]

The other some doing not restoration but restarting the old car's engines and left it.

[@michaelmountasserachab2503]

You are the King Restorator, Lingwoer the Chineese girl is the Queen Restorator...!

[@michaelpage7691]

Great video. With limited tools, it is a testament to their skills. 👏👏😁🇦🇺

[@chawkiaban]

Bonjour. de. PARIS. 01 10 2024 C est magnifique une belle Restauration une machine complètement brûlée est remise à neuve Bravo à vous Bonne journée

[@dtrestoration8590]

Thank you watching video!!!

[@nikoslazaris5958]

thank you,from greece.

[@AmmaraaliShamshad]

Vary heavy job good work nice boy pakistan karachi

[@marijoyferreira4291]

Excelente trabajo enhorabuena

[@paulfellows2094]

fantastic job i loved it what a differance she looks awesome well done

[@vladimiralonso3184]

buen video de recuperacion para recuperar un equipo de trabajo

[@yingchen3768]

So much knowledge!

[@leonardo57]

unbelievable, that thing was Total loss, but NO you did an amazing job, your hands are doing miracles 👌👌👍👍

[@michaelbedell6523]

I agree with the previous comments for sure. Refreshing that there are still young people learning to have a trade. They have gold to restore equipment to be used again for far cheaper than buying new. They get an AAA+ just remembering where the parts go back in reassembling. Great video too! Sincerely thank you

[@gbentley8176]

Excellent work. Start to invest in some more quality special tools that help. Torque wrenches etc

[@Tatal.b]

Excelente trabalho, bom de apreciar e, admirar parabéns

[@JairBorges-kn8vw]

😢Jair Borges . S.Paulo. desmontar é façil . Montar. Quero ver. ...Parabéns....

[@Tatal.b]

​@@JairBorges-kn8vw👍

[@kadimdost7250]

We've finally seen a tried and tested refurbishment finished. The others I watched were unfinished videos. Thanks good job.

[@PaulHigginbothamSr]

An ancient hit & miss type engine on an excavator. I would not have believed it. Take this off and put a three cylinder diesel Kubota on her. I take that back, her motor is perfect. The seat back leans back a bit but you did great. A man can move more dirt with this than 10 men.

[@rickwright7267]

i like all of videos you do good work what ever you find you should bring it back to life and it looked great to

[@congnhiendao7690]

It was great , very good job.The new machine is more beautiful

[@DJ.XU.666.RADIOWEB]

[@walterwingert8060]

Very nice build. And I dont think the green paint will hurt it at all. I dont think you have to paint it back yellow. Green looks good.

[@Restore16HP]

good job. HAve a nice day

[@alexxxl240679]

СУПЕР!!!! МОЛОДЦЫ!!!

[@madgulasureshbabu936]

Very honest restoration

[@walterperry4565]

Awsome rebuild

[@jermainejermaine8252]

geez at least torque wrench and adjust valves already right there..Awesome job on restoring though

[@MUN.A1988]

Excellent restoration from burnt

[@manfromthemist1958]

great job young man you should be really proud of your achievement well done

[@christopherscott8853]

How long do you think it'll last? That thing is gunna leak like a sieve.

[@luisbalarezo9068]

@@christopherscott8853 aaáa

[@ronaldclark2624]

Great Fix and restore to service! Ron PTL USA

[@ferrazdeazevedo6045]

Ou tem talento ou então não se meta parabéns

[@ИгорьКоваленко-е6ю]

Подожгли умышленно, ради хайпа. Листовой металл не повело, медные трубки не поплавились. Обложили сухими банановыми листьями и подпалили. . Дали слегка обгореть, что бы краску легче было обдирать. Расходимся, нас опять наипали.😅

[@KRIVORYKII-M]

👍👍👍

[@giangbui8284]

i commend you. A great effort . So beautiful

[@haddydzdzalg1246]

I can't believe this machine working with one single piston

[@loangquangtv1424]

Iko😅😊

[@gibmelson7628]

top job ! perfect, respect ... 😂😮😊😊

[@СергейРяшкин]

Ensimmäinenkyrp!!!

[@dtrestoration8590]

thanks so much. have a nice day

[@СергейРяшкин]

@@dtrestoration8590 Thank you too! Vietnam?

[@claudiohenrique4363]

Parabéns pela excelente restauração, renasceu literalmente das sinsas, um grande abraço do Brasil.

[@doylerabjohn3435]

Wow.....great job

[@carldrexler7883]

I’m impressed 👌

[@Megadronte]

Super Arbeit

[@mypeeps1965]

New Blood!

[@patrickrooney5130]

I don't think you did a good job on the tractor. I think you did a fantastic job buddy. Well done young man. Looking forward to seeing the next video should you decide to do one. Good luck.

[@Deniska412]

А смысл этого ремонта? Разобрать, по мыть и все старое обратно поставить

[@KRIVORYKII-M]

👍👍👍

[@amichi2227]

👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏 saludos desde Argentina 🩵🤍🩵 Messi 🎉🎉🎉🎉

[@ewanbaxter9199]

Great job. Did you fit new bearings in the engine, would be the best time to do that then you would have a new engine.

[@_lika_dedicated_4105]

молодец вот руль от уазика и пригодился

[@goldenscales]

I've never understood why people set fire to vehicles after they've been stolen or discarded! Amazing as usual, a job very well done!

[@dirceuo505]

Parabéns pela restauração! Ficou perfeita e linda!!! Vocês são excelentes no que se propõem a fazer!!! 🇧🇷🇧🇷🇧🇷🇧🇷BRAZIL🇧🇷🇧🇷🇧🇷🇧🇷

[@duncancremin1708]

I love this. I do have one safety concern, however. You really need to use a torque wrench on rotating parts, like the crank bearings. You should use it on the head gasket, too, but that won’t kill you if it fails. If the crank bearing cap comes undone, the result could be the connecting rod punching through the side of the block and sending shrapnel flying in all directions. That could have fatal consequences for anyone close by, at the time. Otherwise, excellent work and I’d love to see more.

[@jasincolegrove4798]

If there was any real chance of it coming lose it should be tied or locked in place. That’s the proper way

[@andrzej2176]

Super chłopaki pełny profesjonalizm nie odpuścili sobie niczego, doczyszczone naprawione wszystko. Super robota. Szacun.

[@IrenESorius]

Frontloader, not excavator. 👍‍‍😎👍‍‍

[@arnostoermer3563]

Super!🤗😍

[@everaldolima3705]

Um abraço

[@dtrestoration8590]

thank you ❤

[@dsnx2]

Excellent job.

[@petremincu6309]

SALUT DIN ROMÂNIA FOARTE FRUMOS

[@hsk5239jp]

Great! !

[@ЮрийБольшаков-ю4ю]

Зачем разбирают распределители в гидравлике, ничего не меняют, делают вид, что ремонтируют. Мотор тоже, разобрали, ничего не заменили, помыли и опять собрали. Даже дефектовку не проводити. На раме не срезают как попало навареные косынки, прутья арматуры.

[@nevillewomersley7841]

What a great job fellows! I envy you for all the skills used in this restoration.

[@LuisReyes-kq2cc]

Esto son unos monstruos de la mecánica wao

[@henridelas718]

la restauration est bien toutefois pourquoi ne pas utiliser pour certains serrages une clé dynamométrique ???

[@xxof830]

Hey from the USA PA I just had to say wow your so amazing & talented you mad that look so easy I know I couldn't do any thing like that lol I really hope you go far on KZbin ❤️👍🏽🙏🏾👏🏾🏆

[@orestesgatti3570]

Está e um grande desafio

[@ПавелДизель-е1б]

Подшипники молотком без оправки загонять такое себе... Много вопросов.

[@stephaneduhamel2016]

Inverse les flexibles de l'orbitrol de la direction pour moi ce n'est pas dans le bon sens, pouce vers le haut.

[@fasullodavvero]

Ottimo,se volevi mostrare cosa *NON* si deve fare con un motore ci sei riuscito.

[@larrykelly2838]

Great restoration

[@УазНива-й9э]

А чё так можно было? Разобрать всё , помыть и покрасить без замены новых комплектующих🤔

[@Yuriy_Alma-Ata]

Очень сильно напрягло, что покраска осуществлялась без заклеивания технологических отверстий и резьбовых элементов, шестерни и подшипники молотком забивал (то есть повредил уже при установке), сварка - это вообще ужас.

[@evgenevgen1239]

ну да покрасить нужно теперь, и колеса вернуть назад

[@KRIVORYKII-M]

👍👍👍

[@studebekker75]

Не сильно сгорел аппарат! Обложили соломой и немного закоптили для контента! Но в целом хорошая работа...

[@walterwingert8060]

Oooops green and black with a touch of orange.

[@alvindixon7104]

How much did that rebuild cost in USD$ great job,

[@mary74724]

🧡🧡🧡👍👍👍👏👏👏👏💪💪💪💪

[@evgenevgen1239]

Он его сам только что сжег. Ну видно же по следам на траве. что горел пару часов назад.

[@KRIVORYKII-M]

видос надо вот и подполили👍👍👍

[@domingobautista8932]

😁🚴😄👍👍👍👍👍👍👍👍👍👍👍👍👍 good 😁 job 👍👍

[@renevalenti]

Also ich habe keine Planung beim Motor gesehen oder eine Schraube mit ein Newtons Schlüssel anziehen schade sonst ein gute Arbeit …. Ich hoffe das der Motor lange hält viel Glück 👍🍀

[@Houbaraoutdoors]

What happened to uaz final restoration

[@АнтонЗуев-л3ж]

Предварительно сжечь чтобы потом типа восстановить..... Очень интересно😂

[@srdarsrdarov3343]

Please uaz 469 video

[@mynameisdden8234]

I want to ask something.. is this what they call "exvavator"?..

[@robergerobert5836]

la plaque de starteur est dans le mauvais saens

[@johanbergstrom8255]

Please, get some proper tools for bearing mounting. You´ll destroy the bearings when you hitt them directly with a hammer!

[@stephenjourdain1842]

Pivot pin shafts painted? They are always bare metal.

[@yitzy2159]

Does this guy burn equipment for restoration videos?😅

[@mustafaeminoglu1568]

👍🖐🖐🖐🖐🤛

[@minimumboy1587]

Плита для стартера не правильно установлена

[@Veter-voli]

уникалы сами обсыпали сеном и подожгли

[@SHOEIgp]

ахаха)))) удобно так рулить?)))

[@KRIVORYKII-M]

👍👍👍

[@rjsc1959]

26:18 yo pondría la llave en el otro sentido....pero yo no soy mecánico...🤷‍♂

[@nestorcherizzola2119]

👏💪💪👌👌🇺🇾👌

[@user-ms2fb1gd7e]

Крышку стартера не правильно поставил😅

[@fafnir-fasolt]

It was burnt and the fuel tank is still intact?

[@АлександрПетрань-б9ш]

😆😆😆😆😀😀😀😀😀😀😀👍👍👍👍👍👍

[@sly123size]

The front loader used to be yellow why you have to make green?

[@Italiangoodfella]

Green Is Better, I think.

[@YurySysa]

Так. Насмотрелся я рестоврации пойду и я отреставрирую поезд. Начну с 1 вого вагона

[@samekww]

Pytanie za 100 punktów po co wam maski na twarzach ?

[@миня-щ2б]

где УАЗ

[@billtodd6509]

What if it rains?

[@mcsaffold]

A torque wrench and locking tab washers must not be available here.

[@daddywoofdawg]

It's not an excavator but a loader

[@CREPOZOIDES.LE.MORBIDES]

[@dmitriyfedorov6271]

Всем привет ты будешь восстанавливать UAZ 469 . Мы увидим финальное видео ? . Лично я подписался на твой канал ради сука UAZ.

[@paulhill3106]

nope. stopped watching16 mins in, this is just another clean and put back together... No ports were masked off and paint from the spray going everywhere inside the motor, If and i say IF this had been in a fire, why did you not change the roller bearings>???? thats what they are there for, to be changed at every refurbish. This video is a mockery of decent rebuilds., and just made for vicarious watching with no regard for actual repairs