Dual colour Roof rack lights - Simply install in ARB Base rack

[@davidstrongman4891]

I run a small stedi light in the centre removable panel in the back door, works great for light in the rear 👌

[@TravelExplore4x4]

Thanks David 👊🏽 yeah the Stedi lights seems to work well in there I have seen. I’m in the process at the moment of fitting down white and amber stedi lights in the rear tailgate. Will pop a video up once I have fitted up 👍🏽

[@tharindu6]

Awesome video ! Clearly the led mob has taken the opportunity to increase price to $40

[@TravelExplore4x4]

Oh really. I haven’t check them for a while now.

[@bigbaldbeardedblokefishing3418]

great video mate. can't wait to see what's in the 12V setup.

[@TravelExplore4x4]

Cheers bro 👊🏽 yeah hopefully it’s helpful for People

[@Joe-po3fd]

Thanks for the informative video, very helpful 👍

[@travisradoccia5262]

Hey Kane, love your work mate. Just a quick question from me - how have you joined the front and back lights together on the same run, just a crimp connect with all 2 wires in, 1 wire out? And same for the 5 core into 7 core Cheers mate

[@TravelExplore4x4]

Hey Travis Yep I basically wired the front and back lights together and joined them into 5 core and then ran it to the back corner where the 7 core runs up into the roof rack. I ended up soldering and shrink wrapping all the connections up there. Hope that makes sense

[@stuartstuart70]

Great video. I have just purchased same lights from eBay and awaiting there arrival. I’ll have to look more closely at how you wired them because that’s the part I am most unsure of. 7 core vs 3 core and how you wire them together and get power etc. This is where I have the least knowledge. Could you add a deutsch plug on them? But thanks for the vid.

[@TravelExplore4x4]

Thanks Stuart. Yeah that’s the part I was worried about as well but it was pretty simple in the end. So for the 7 core I ran all the earth into the one earth cable. Then 2 cores were positives for the left side (amber & white), 2 of the cores were for the right side (amber & white) and then I have a spare 2 cores as I was going to put the same lights on the rear as well. I just haven’t gotten around to doing that. You could put lugs in if you like. I ran all mine within the roof rack so a plug was going to be very difficult to fit in there. If you are running the wiring externally then definitely use them

[@rustyw3858]

Well done great job Thanks

[@TravelExplore4x4]

Thanks mate. They work an absolute treat

[@lochie9827]

Hey mate, where did you get the double switches from?

[@TravelExplore4x4]

Hey mate. Apologies for the delay in reply. They are from KO gear. They do some awesome gear👌🏽