Dump trailer BUILD (without hydraulics)

In this video I make a small dump trailer using a 12V winch.
For some time we have been changing the barn into a "new" workshop in our spare time. There is a lot to do there and that's why I decided to build this trailer to speedup and facilitate earthworks.
It will definitely be useful for transporting firewood for the winter, carrying heavy things and many other works.
I think I was exaggerating a bit with the weight of the trailer, because it weighs over 100 kg, but at least it's solid :)
The winch used in this design works well, although it could be a little stronger.
I did not give an additional battery because the tractor has a 26 ah gel battery and it is a sufficient power source.
Some homemade tools used when building this project:
• Big Vise using Bottle ... - Hydraulic Bench Vise
• The easiest way to cut... - Chop saw
• DIY Belt Grinder 2x48"... - DIY Belt Grinder 2x48

[@chaineffect6437]

Not one aspect lacked attention to detail/function! PERFECT. This must be a gratifying build to have done, able to use

[@siswhadicml8312]

&&yyyy66&6

[@bobw7066]

I am a retied mechanical engineer in Australia, this is an excellent job of building a small tipping trailer. I however would have installed the axle about 150mm towards the rear of the trailer, it would tow better and put some weight on to the tow ball for more traction on the towing machine. Five stars

[@tjgrant3124]

Elevator mechanic here, #1 rule with crosbys,...never saddle a dead horse. Saddle always goes on the live side of the cable. Nice work brother 👏, great craftsmanship!!!

[@aday1637]

Being Polish is a wonderful thing. Love to see a fellow Pole doing good work. Maybe we should import more from Poland and less from China....then we wouldn't have to replace it so often.

[@cjzx325]

Brilliant build! I like that you created your own snatch block for the winch lift. Doubled your lifting capacity!

[@snobear41]

As a young man i worked as a welder/fabricator- serious skills dude! SOOOOO jealous of your shop

[@revdcdon970]

It is a real pleasure to see someone as talented as you, who shared your skills and knowledge doing this project. Thank You. Our world needs more like you.

[@kmech3rd]

Absolutely love that saw machine. The way it eats steel tube is SO satisfying.

[@roma_romashkin]

Made in Poland and Make it Extreme is the best channels on KZbin with cool inventions and DIY. Thanks!

[@marinijaish]

Also try this old tony and workshop from scratch

[@peterstabel753]

And Donn DIY

[@carineservrankcx8289]

@@peterstabel753äääääaaääaaaäaaaaa1aaa

[@apphead41]

And colinfurze

[@bengkeldinamotel7769]

😁 yes make it extreme

[@_zzpza]

Top notch craftsmanship as always. Very good cable management, the box within a box idea is genius!

[@davidduffield7553]

In 1939, the Germans thought they knew what they were doing. You are a very good builder. That is a super trailer. You need to display it on your shirt.

[@victorriceroni8455]

I thought of that same mechanism a couple of years ago. I am terribly glad to see it works. Very well done.

[@mateuszlis7741]

Wszystkie Twoje wstawki oglądam z uśmiechem na twarzy. Super pomysły, można się wiele nauczyć. Oby tak dalej. Pozdrawiam

[@waynebyerly9681]

After observing your skills at manufacturing, i would never be afraid of buying anything manufactured in Poland. I am very impressed!

[@johnsellers2999]

Wayne Byerly you know what pisses me off though? In USA our government would praise his work and buy thousands of them for government work ,but if someone from USA trys to sell them to our own government they (the Biden administration) would cancel the order and call the guy named made in USA ,a racist for the name made in USA. It's not hard to imagine. But very good job made in Poland.

[@gotternxxx5992]

Jak dla mnie naprawdę gratuluję talentu... którym jest twoja mądrość. Wielki szacunek.

[@scottcates]

My man is one with the lathe. When he incorporated zerks into his design, I drooled a little.

[@kentuckytrapper780]

You can make mine red or blue, great job man. Love the cut off saw. You do excellent work.

[@Xlaxsauce]

If you weld chains to your gate and chain hooks on both sides of the bucket. you can control how much the gate opens to help control the flow of dirt out of the trailer.

[@gabrielruvalcaba2310]

True genius.. I've seen some other trailers that won't even dump that size of load. Also my compliments on that tractor belt driven and has balls to pull through.

[@MadMolotoff]

Ждём следующую серию, с постройкой мини экскаватора!

[@DanKoning777]

Some time ago I thought: *"one of these days he's gonna make something thats not very satisfying"* *I STOPPED THINKING THAT QUITE A FEW PROJECTS AGO.* Well done............ *again.*

[@pcka12]

Love this bloke’s endless ingenuity!

[@micdiva]

Hes aight

[@mandakhbayarjambalsuren8179]

ad

[@mandakhbayarjambalsuren8179]

a

[@zivojinradulovic3302]

Ili

[@zymergashi8352]

@@mandakhbayarjambalsuren8179 q1q

[@ochotnik3219]

Twoje wykonawstwo ociera się o geniusz ! chylę czoła i życzę dalszych pomysłów ku uciesze oglądających

[@outermostoutermost9418]

My father was a master fabrication and anything he could dream about he could figure out how to make it work lol what u did there was just what I watch him do and it always amazed me. Go from a pile of junk to something you never let go of ..lost him in 06 and miss him every day..I never had the gift of patience lol thats half of it is time and patience...keep up the great work.

[@captivenut4122]

Your work can't be praised enough! Great conception and execution every time!

[@korishan]

Really nice work. I've been thinking of building my own dump trailer similar to this. However, mine would be made out of steel rack beams (we pick up "scrap" from a local warehouse store). One change I would make would be to use three pulleys and run the cable back to the wench. That way it could pick up twice as much weight, albeit a little slower. But it would be less wear on the wench/battery.

[@jssomewhere6740]

Very nicely done. Where did you learn metal, that doesn't just happen. You had to have had an excellent mentor. The apprenticeship under a true journeyman or master tradesman shows.

[@DomNaPechi]

вот это подход к делу! Супер. Завидная аккуратность и т.п. Да и кол-во инструмента радует.

[@user-xz4lr9to5s]

Чо за трактор

[@jmtx.]

Thank you for sharing another awesome build!

[@drummerman1206]

Absolutely love watching all of your inventions. You’re an engineering master.

[@user-mt8vu9kp3p]

7

[@CHELLIE2408]

Nice Job 😊 Now you just need a Snow Blade on the front of your riding lawn mower to level out the dirt with :) I Bought a Riding Lawnmower and a Snow Blade To scrape the weeds on my 1/2 Acre lot, after the rain came the weeds took off, My riding lawnmower made short work of those weeds and i graded my yard with The double Pallet that the Mower was Shipped with, I added a 2 inch Ball on my mower , My Yard came out perfect, nice and smooth 😊 Know Whats Funny ? I Have not even used the Mowing blades yet, I Have just been using the Mower as a Tractor 😊

[@raymondfilyau7500]

Dude you must have a dream garage!! Lol. Every tool any man could ever want!! I'm jealous!!!!

[@MCsCreations]

Pretty fantastic work, dude! Looks beautiful and works great! 😃 It remembered me of my parent's farm! 😃 Stay safe there with your family! 🖖😊

[@DonnDIY]

This is one hell of a necessary build. I felt for you when you were shoveling dirt. Been there, done that. Push of a button on that remote and magic happens. Great job!

[@MadeinPolandChannel]

Thanks man!

[@beepboop9848]

This is wholesome :3

[@bilukumar5995]

@@MadeinPolandChannel f

[@ollimakkonen6481]

@@MadeinPolandChannel, Good job man, simple, easy to make, strong and works well. A great tool for any farmer. Greetings from a Finn living in Indonesia.

[@fordwinsor9365]

@@MadeinPolandChannel 0loiuy6

[@tomayrscotland6890]

Tom Copland Scotland. a great Video Fella' I will watch it a few times and if I get a unit like yours built, I will live longer, Carrying sand is Killing me at 71. you did a great Project. I build wooden Sand blast cabinets for bead blasting. But I will never make money selling them. Cheers Fella'

[@forcesightknight]

Sweet, now your tractor needs a bucket loader. Great job

[@paulsonaksones]

???

[@papalilburn]

Outstanding workmanship in every aspect!

[@Mr402TA]

Every time I watch a cool build like this, I eventually hit that point where I say, "Man, I wish I had a lathe..." Very nicely done though, clever use of the winch there. Way easier than hydraulics.

[@Yhrim70]

yeah no kidding... and a plasma cutter.

[@ervincameron8936]

Lathes are gateway tools bro, stay away...

[@Mr402TA]

@@ervincameron8936 Damn, too late, I finally picked up a beginner level one. Past the point of no return now lol.

[@Hellsong89]

@@Mr402TA Due prices around here even smallest hobby lathe or second hand wreck, i took full nose dive into deep end and started to make my own lathe from the scratch, since someone was gracious enough to drop new chuck, axle, cone bearing and frame tube into local metal collection point, where i picked them up for free. Already got axle machined on the local shop to accept the chuck and currently working on making frame for the bearings and seals, witch get welded to tower and frame will come from I beam probably when i can source cheap 2meter long peace of it and some scrap peaces of plate for the carrier. Tail chuck was pretty easy to source, since machine shop agreed to help out and machine the tubes needed for it and machine MT4 to MT3 adapter that i picked for ridiculously cheap so it can be heat fitted to tail stock. Machining the morse taper would cost pretty hefty amount but this way its almost free. Probably end up costing around 400-600€ to get it operational enough to turn chips, but everything after is just convenience and such addons, like digitally controlled lead screw and digital measuring of the operations.

[@ronaldoSilva-iu7bk]

@YHRIMkn

[@elguapo3527]

That has to be the sturdiest little dump trailer on the entire planet. Man, this guy has some nice tools. Great design and build, young man. From Texas.

[@darrellpiker3330]

Great job man , wish you were my friend , A friend with a welder is a friend indeed …. Great job

[@user-rl6mo6rr4f]

Мастер на все руки😀 Отличная у тебя техника и инструмент)

[@koeoo361]

Вот вы его лайкайте, а ПОЛЯК ни одного ❤️под текстом на кириллице не поставил. Вывод????

[@user-rl6mo6rr4f]

@@koeoo361 та я не за лайки комменты оставляю. Он делает классные вещи,мне это нравится,я ставлю лайк,и пишу коммент чтобы видео продвигалось и он получил больше денег с этого. Следовательно,контент будет выходить намного чаще,и радовать меня) Логично?

[@yankesinside]

@@user-rl6mo6rr4f Denni mądry z Ciebie człowiek a Polak to bardzo szanuje i ceni. Dlatego proszę bardzo ❤🧡💛💚💙💜🤎🖤🤍💕💗💖. Привет из Польши ✌✌✌

[@user-on2cg5hj6h]

@@koeoo361 Русский он знает , иногда отвечает . Просто обычный русофоб .

[@user-rl6mo6rr4f]

@@yankesinsideDziękuję bardzo)))

[@j.davidwilliamson1163]

Love the foot operated vice.

[@douglaskirk5636]

EXCELLENT INGENUITY Thank You for Showing me how to do it Right . . . FANTASTIC . . .

[@PaulodoRioedeMG01]

Portuguese - Brazil. Caro amigo. Fora do comum, excelente trabalho. Continue em seus projetos, sempre pensando em inovações. Pensa também em fazer projetos para fabricação em larga escala pois com certeza terá sucesso total. Parabéns. Digno é o trabalhador do seu trabalho!

[@jeremycanning8934]

Like your builds. Industrial strength so you know it will last for years

[@felixe.8402]

Except the buyed parts it's absolutly correct. The winch and especially the wheels are the things he needs to exchange first.

[@1D10CRACY]

@@felixe.8402 Other than the color, it looks like a HF wench. For light weight applications like this trailer, it'll probably hold out for many years.

[@sharadj1611]

I am impressed with the tools and equipments he has. Nice job

[@juliuszkocinski7478]

It's really refreshing to see someone building something actually useful

[@vishnuingle8940]

वब

[@davidbridge3542]

Very good skill set. Just shows with the right kit and the training to go with it everything looks easy. Pleasure to watch.

[@t.d.mich.7064]

Nice build! I think I personally would have used larger tires, but that is something easily changed. Good job!

[@kokoloko12398]

So cool! You can be proud of your creations. Very useful and super well designed! Best from France

[@axeus1382]

Well, congratulations to you with the purchase of a new dump truck😁😁😁👍

[@coryhalvorson8874]

Great idea, brilliant execution, I did something similar but instead of a winch I just put a bottle jack for an engine crane on the front of my tilt trailer

[@pyozoa]

Wow! Awesome, you got some skills!! Definitely helps with all the work that you need to get done! Way to go!!

[@szczepanchrzastowski2475]

W 22 minuty zrobić takie cuś, to szacun.

[@user-cf6wg6vx1w]

Класс 👍👍👍👍👍. В конце улыбнуло. Молодец. Отлично.

[@syamsurisyam8280]

Ide Anda sangat membantu untuk Negara2 agraris , seperti Negara Kami Indonesia , Salam dari Indonesia josss Bro .

[@rafaantczak3050]

Jak zwykle genialny pomysł 👨‍🏭 czekam na kolejne projekty

[@user-pw7fn1lz6l]

Witam. Oglądam twoje filmy tak, jak by w rolach głównych grali Bogusław Linda i Czarek Pazura. Dziękuje. Powodzenia i zdrówka.

[@lilypeyton6510]

167noo. N

[@joemadre3040]

Organized genius. Bravo.

[@anoka114]

This guy has some mad skills and some pretty nice equipment.

[@SteelCraft99]

Nowy film od Made in Poland i wieczór odrazu staje się lepszy :D Świetna robota!

[@thomasingle1333]

That is an excellent build. I really enjoyed watching it. Thank you.

[@user-sq3ux1db4s]

Красавчик залатые руки умеет делает в мех добрых благ и успехов в работе

[@rongeernaert1208]

Piękny wózek z wywrotem i dużo pracy z rąk

[@lironmtnranch4765]

Nice build, you even made your own sheave for the wire rope, props! Some dump trailers put the pivot point a little forward of the rear of the dump box. 1 foot makes a big leverage difference, and even with a low trailer like this gives room for a steep angle.

[@WireWeHere]

At 13:45 your cable clamp did a 180 the second you stopped looking at it. The dead horse doesn't need a saddle. A very good channel you have here sir.

[@scroungasworkshop4663]

So what’s next? An excavator? Some people in this world just have too many talents and you my friend are one of them. Is there anything you can’t build? Cheers Stuart 🇦🇺

[@Mariusz1987r.]

Ale mi dałeś pomysł na kiper.......fenomen ...dzięki stary......

[@trakers3]

Witam. Ale Ci poszło z tą przyczepką, super wykonanie jak zawsze! Pozdrowionka!!!! :-)

[@stoveboltlvr3798]

Very useful to have. Great job building it!

[@mkud7045]

Jak ktoś już napisał: briliant. Fantastyczny jesteś w swojej pracowitości i pomysłach.

[@LeonardoSilva-jv5ci]

This is what we can call as a really good job. You hv all the good in tools. Congratulations from Brazil.

[@Patriottoo2]

That was fun to watch. Another great project. I've never considered welding in the dark... think I'll give it a try. ;-)

[@samsien9105]

Welding helmet has flashlight pro.

[@cocospops9351]

Awesome. I'm building one of these myself soon

[@OLEGfermer]

Привет дружище 👍👍👍 Класс. Работа кипит полным ходом 🤝 удачи вам

[@Estabanwatersaz]

Love them Polocks. My grandpa was Gaska from Warsaw area.

[@adrienst.journy4652]

Excellent fabrication. You have talent !

[@WorkshopFromScratch]

Amazing idea. The whole project is perfectly made. Good job, great video :)

[@firmanman209]

I

[@marbles430]

Outstanding fabrication and project. Thanks for sharing it and your skills.

[@SuperAdam1313]

My God, I've been thinking how to use a winch on a dump trailer. I had all sorts of crazy ideas, now I know thanks to you! Dziękuję I'm only half Polish

[@fredericdobbelaere7725]

Made in poland ," tu es un champion "🤟😝

[@hedleyfurio]

Awesome to watch a master craftsman at work . As mike patey builds airplanes you do metalwork . Thanks for posting these

[@michael6155r]

😊pkl,

[@michael6155r]

..

[@craigmonteforte1478]

Welldone , that trailer will probably out last both you and I because of your Quality ,I am a retired Woodworker myself and i Engineer and build things in the same manner i’m a firm Beleiver on Signing my Work with my Name and year built as in America anyway the Handmade Items and Designs are becoming more and more Treasured by the next generations that are products of the Technology Age as many of those people didn’t feel the need to learn how to physically fix or build things on their own they would go buy a Trailer on the Internet that’s not my Style my Dad built everything and taught me how to Weld , Do Carpentry,Electrical , and Plumbing plus fix our vehicles , and a few other things

[@bernardocrisologo6166]

I like watching creating tools an invention..

[@jeffbeck6501]

I know the tape is sped up, but he looks like he is working on an assembly line instead of a custom project. ...like every tiny thing is like nothing to him and he is working almost uncounsciously. You never see him just stop, and think about it. It is amazing to watch him work. I care none about what he is actually building. I am here for the build.

[@stonekingdom1088]

Vision

[@aniljadhav6936]

'

[@rodrigomirandaariel8229]

Well done my friend!!! Expectacular proyect!! Very good and practice!!!! Thanks for share!!! Best regards from the Argentinian Patagonian!!!👍👍👍👍👍👏👏👏👏

[@goransablic7339]

Excellent craftman ship. Respect.

[@advancednutritioninc908]

Excellent fabrication (as always)!! Great design - more simple than hydraulics and all the mess that comes with that! Liked !! subbed !!

[@edwardchidester1834]

Awesome DIY Build! Keep up the Awesome Work.

[@wolfrig2000]

This has inspired me to build my own trailer now

[@user-rr7xk1in5o]

Фантастика! Лучшее на ю тубе! О!!!! Вау!!! Ещё бы цвет красненький!!!

[@agknives9119]

Uwielbiam twoje filmy. Dobry wózek 😁

[@larrygeorge3599]

Inspirational fabricator!! I think it's great

[@user-ek9rv3df9n]

Али файна придумал! Бардзо cool! 🤘😎👍

[@Larecupazimutee]

Always projects we don't see elsewhere! You're the best!👍💪💪👍

[@gforcekaras]

Envious of your skills man, very nice work!

[@mud5254]

O zesz ku... Facet tym sposobem na podnoszenie skrzyni to mnie zaskoczyłeś, szacun. Pomysł jak zwykle zajebisty 😎😎😎

[@szuwi122]

I mnie.

[@user-so5xj5lz8i]

молодец. привет из Калининграда)))

[@IndianaDoug]

I enjoy how everything is over engineered on this channel. Love it💪🏼

[@wiktorczyz2977]

Chwała Ci za to że nagrywasz :) myślę że w przyszłości zrobię sobie podobna, ale z podwójną osią i trochę szerszą i dłuższą ;)