INSANE Spray Paint and Alcohol Trick

[@bradbair1405]

If you do spray paint before alcohol you get more round cells. If you alcohol then spray paint you get a spider web effect.

[@HollyMartin]

And if you spray rubbing alcohol w fire............... Lolololllo

[@HollyMartin]

I was literally thinking, he's not going to spray fire onto rubbing alc..... Aaaaaaaaahhhhhhhhhhh!!!!!! Lololol. I'm terrified of fire, personally. Lolololo

[@HollyMartin]

I enjoy your constant chatter. Kept it upbeat.

[@TheBitchFromPittsburgh]

@Brad; That’s very helpful info!! TYSM!!!😉

[@TheBitchFromPittsburgh]

@@HollyMartin He certainly is a character, you can just tell from this vid!! It’s the first I’ve seen him. Looks like I’ll be binge-watching his vids & sub’d to this channel. I really like his sense of humor!! He’s trying new things, experimenting wholly unfazed & unafraid. I’m pretty sure I remember the late, great Bob Ross telling us that (in the art world) “there are no mistakes. They’re just happy little accidents & that’s the joy of painting, my friends!”

[@SharonCreamer671956]

Being the daughter of a hardware store owner, I would like to make a suggestion. Always stand up while spraying. If you are sitting, you breath in more of the fumes. Which you won't do if you are standing up. Also, if you are standing up, you can spray with your arm fully extended and, again, not breath in as much of the fumes, which you cannot do while you are sitting. Also, if you are standing, you can step away any time you want to get a breath of fresh air. Otherwise, keep up the good work.

[@kennethbutzer4467]

Well I am not related to anyone who works in a hardware store but I have worked with many mediums over the years as an artist and as far as acrylic sprays go the only advice I can think of is..RESPIRATOR!! Standing,sitting especially inside makes absolutely no difference,it’s all toxic to your liver and lungs, so saying stand up so it’s not as bad is irresponsible.

[@SharonCreamer671956]

@@kennethbutzer4467 Compared to what he was doing -- it is not.

[@erincrawford4751]

He set the table on fire, and you're focused on the small amount of fumes he may be exposed to 😂😂

[@SharonCreamer671956]

@@erincrawford4751 That was a stupid thing to do. I think he learned a lesson from that. Or, perhaps, he was trying to teach a lesson.

[@karenmusa3052]

Thanku, I appreciate your concern, seems others don't and just wanna put others opinion down..😔

[@driverjamescopeland]

TIP: When try to emulate rock veins, use feathers. It lends a ton of depth, and allows you to get either the ribbon effect or the more jagged/fractured look, depending on how you use them.

[@christycase2324]

Just use a good long feather as not one of the loose downy type or it will drag

[@AquaLady153]

nice!

[@bbarker5766]

I've custom painted motorcycles and many other things for over 30 years and I've used similar techniques to get all kinds of different effects with paint. I've done several that look like acid was splashed on the parts and ate through multiple layers of paint. It's awesome to work with stuff like this.

[@DuncanCustomAirbrush]

Sweet! That is basically what I am doing in many of my vids: showing new people the old techniques, so it is new and mind-blowing to them. Let me know if you think of any more techniques I could try out and make a video on👍

[@mysticdawn82]

Curious how you got the acid effects going

[@CraftescapeTX]

Yes, please to both a river table and a galaxy painting! Those street artists are so amazing and with all your techniques and experimenting, I can't even imagine what you could create! The table is stunning!

[@DuncanCustomAirbrush]

Will do!!

[@davefletch3063]

How about a galaxy river table…the combination would be awesome

[@Praise___YaH]

Salvation is Simple HalleluYAH “Hallel u YAH - Praise ye YaH” YaH is The Father (Genesis 1) YaH arrives via the TENT OF MEETING YaH was Who they Crucified for our sins YaH was Crucified on an Almond TREE Ancient Semitic Moshe (Moses) Isaiah Scroll (The Original Isaiah) Isaiah 42:8 I am YaH; that is my Name! I will not yield my glory to another or my praise to idols. Isaiah 43:11 I am YAH, there is no other Savior but Me. Isaiah 45:5 I am YaH, and there is none else.

[@pattynewcomb4213]

That would make a beautiful moon if you use a circle stencil

[@DuncanCustomAirbrush]

Oh yeahhh you're right!

[@KensToys74]

Thank you. Not only for teaching me something new, but also for the entertaining video.

[@DuncanCustomAirbrush]

Thanks!Glad you enjoyed it!

[@teslakennedy503]

Love how you're just being yourself instead of giving the typical tutorial vibes!! Awesome work , cool ideas, and very entertaining 😂😂😂

[@brendamozzy]

Me too!

[@nomudnolotusnodragonnogold]

Yeah, very well done.👍

[@ebre3080]

Now that is a beautiful slab of dark marble. I think i will try this on my gardentable, thanks for the idea.

[@ETOE]

Can you make a table in a river please, I mean an actual table in an actual river?

[@DuncanCustomAirbrush]

🤣😂

[@bethanytaylor7656]

My favorite part of true marble is the cold stone like surface. Your project curbed out pretty cool!

[@Theshort-g5w]

It’s crazy to be able to watch the colors change like that.

[@allanedgar8499]

The extemporaneous approach is so cool!!

[@AnitaEriksen-zb9fr]

Metallics would look amazing especially pinks and purple teal!!❤

[@DuncanCustomAirbrush]

YESS!!

[@matthewmickles1997]

Looks like cool craters for moon painting too

[@firepr00f77]

Nailed it

[@ne1canbgr8]

1. Respirator or ☠️ especially with rusto paint. 2. For this application, use store brand Blk, Wht, Grey etc. Metallics can be the $ investment. 3. Specific paint for furniture available. 4. Epoxy finish. 5. Doing the legs as well significantly ups value of project *unless retaining character of legs) 6. Use Killz as base. Been at this since 90s. Perhaps I put some vids out lol. Good work. Happy painting....

[@DuncanCustomAirbrush]

Great tips

[@abalzeris831]

Would love to see a river table!

[@eponymous_graphics]

your abstract artwork is outstanding ... well deserved akolades ... trying your techniques out myself. Thumbs up !

[@DuncanCustomAirbrush]

Thank you so much 😀👍

[@sherylmccloud385]

Love it. I was thinking "space" and you took the words right out of my mouth. I was thinking a sea sponge dabbing would also add depth. Great video.

[@DuncanCustomAirbrush]

ooh nice idea! I want to do one of those street art planet paintings!

[@Wrecktapus]

I got the feeling of the surface of an alien planet with meteor craters and earthquake damage.

[@Peaceful_Zen_Life]

I wonder if a finer mist would be better. If I were doing this I would test different density of mist mixing with the alcohol.

[@urhurd]

You Tube suggested your channel this morning, used the plastic wrap trick on an old metal pot. I’ve used plastic bags before but loved your method. Wish YT allowed to share pics.

[@kaoscreations865]

This is incredible! I'm so glad the algorithm worked for me to see this! I love experimental works, even when they don't turn out. It's a learning experience. This gave me an idea for a small table I'm putting together. So super excited now! Thank you!

[@DuncanCustomAirbrush]

That's awesome to hear and thank you! I would love to see how your table turns out!

[@kaoscreations865]

@DuncanCustomAirbrush I don't have my own channel, but I will do what I can when it's done.

[@carriesmith3421]

That’s EXACTLY WHAT I WANTED! You are so excited. YES to outer space. That’s what I am working on right now. Need some inspiration. Thanks

[@bonnienapier8459]

❤I just love it, I have a large octagon coffee table that I've been hesitant to restore, but it really needs an update. You have inspired me ❤

[@ryancasper9343]

Brother, that looks great, and you know that you are only a couple steps away from that next level up. Inspirational.

[@honeycheshire106]

I've started painting with alcohol years ago. I love it, especially when putting resin over it 🎨🖌

[@oclmw714]

Omg crazy beautiful...I love it!! ❤ It's definitely giving space vibes!! I'm going to have to try this for sure! 🙌🏼

[@DuncanCustomAirbrush]

Awesome! I would love to see it when you do!

[@kimberlybyars1693]

I do this effect with stainless tumblers for a rustic metal effect, works perfect with a vintage teal color and copper metallic spray paint. I spritz the copper then immediately hit it with 91% alcohol

[@DuncanCustomAirbrush]

I bet that looks awesome!

[@taylorojeda2297]

I know now what I want to do with a table I've been looking at refinishing! How did you choose to seal this? Did I miss that detail? And have you done this kind of thing without the epoxy but still on a table surface? Love the video and excited to learn more!

[@DuncanCustomAirbrush]

I finished if off with 2 layers of epoxy

[@luisperez8945]

Is the picture on the surfboard in the back, drawn / painted. If not how did you put that picture on wood. any video or tips wood be appreciated, Thanks and keep up the great work.

[@DuncanCustomAirbrush]

I have a video here on my channel where I painted it - it was a few years back but keep scrolling on my VIDEOS page and you can see exactly how to do it 👍

[@GarethVaughan-my1fw]

Stunning marble galaxy you've created there, and really enjoyed your enthusiasm! So, I walk into a shop asking for a liquid that's almost pure alcohol... can picture the cashier looking down at me already, ha ! Thanks for tips, you're a good teacher !

[@nedcramdon1306]

This is wwaay better than those pour videos. This is more like real art.

[@BaronVonStauffenberg]

I like the way it turned out. Very cool.

[@runningdeer2111]

Very cool. Just found your channel, subscribed. I really appreciate you not cursing. So nice to watch a video with no cursing. And so interesting and fun. Looking forward to digging into your collection. Awesome.

[@DuncanCustomAirbrush]

Yep family friendly here because I am a family guy and want to honor the Lord with the talents He has blessed me with so that I can be a blessing to others!

[@michaelfacey1909]

Your humor is the topping on your instructions. I love the technique. Flow as you Go 😂😂

[@DuncanCustomAirbrush]

Thanks so much & Glad you enjoyed it!

[@dawnholmes-hedgehog6177]

Your video was so refreshing to watch and made me laugh on such a dright winter's day. I agree, the hardest part is knowing when to stop and let the artwork do its own thing. That is a stunning table and whoever buys it can be proud to own such an original artwork. I have subscribed as I need to laugh more, and as a mixed media 'artist' myself, it is a joy to learn. Thank You.

[@DuncanCustomAirbrush]

Awesome, Glad you enjoyed it, and thanks for the uplifting comment!

[@AnitaEriksen-zb9fr]

Metallics would look awesome!!

[@bless5xs283]

Love this!!! It looks like my in-laws granite bar top. We always call it the moon bar in the basement. I would love to see river table made. I’ve been wanting to do that with an old table we have just haven’t gotten the nerve yet. 😂 THANK YOU! You always make it fun and easy to understand. 😊

[@DuncanCustomAirbrush]

Thank you so much, a counter or bar top would be sweet to do!

[@michelleluster9723]

That is so neat!!!! Thank you for sharing!!! You are an expert!!!!

[@KimberlyLetsGo]

OOooohhhhhh! That was cool!!! It looks almost like a moon. Maybe another planet's moon? Good job!!!

[@joycepugh5347]

thanks for another awesome share - yes PLEASE do both techniques so we can see how you do them - Have a great weekend

[@DuncanCustomAirbrush]

Thanks & have a blessed week!😉👍

[@bellescreativecraftdesigns1132]

I would love to see how you do a river table!!! 🩵💙🩵🔥🩵💙🩵

[@barbridingsTheResinator]

Table came out amazing. I would love to see you make a river table. I want to do one too but I'm scared ..LOL

[@DuncanCustomAirbrush]

lol mee too but we just gotta go for it!!

[@Phil4013]

Duuuuuuuuuude one thing I learned (besides the many) it doesn’t matter if you use fresh paint on WET epoxy! 🤯

[@cecileroy557]

I love it & it was sooo much fun to watch you create it!!

[@RamoJack-C]

You are the BEST Entertainer and Artist! Keep it up! Jack, Toronto Canada

[@DuncanCustomAirbrush]

Thanks Jack!

[@atoiler1389]

Hello and thank you very much for posting your video(s). I find them very helpful. I am hoping you could help me with a couple of questions. I have a smaller antique safe that was my grandfathers. The paint is badly worn off. I will be sanding the entire safe and I plan on repainting it and adding a bit of art. I have NEVER used an airbrush! I would appreciate any suggestions for the following: 1) what BLACK colored paint product to spray the entire safe with once it is sanded to bare steel? 2) what paint product to use in my air sprayer? 3) what paint product to spray over the entire safe, in order to give it a clear coat as protection for the black paint and the artwork? Thank you very much in advance, it is appreciated!

[@DuncanCustomAirbrush]

Here is how I like to paint starting from bare steel: kzbin.info/www/bejne/f3-piJ2wrL2BeMk Then you base coat, I usually like using Rustoleum 2x matte (black or white). And after artwork, I would have my buddy spray automotive clear coat on it for ultimate protection and durability.

[@JAESCIV]

Personality is on point and the video edit is freaking outstanding😊😊😊 please keep making content

[@DuncanCustomAirbrush]

Wow Thank you so much!!

[@tyb5425]

This guy is amazing! And he can Sing,rap,dance in just 1 Show…

[@DuncanCustomAirbrush]

lol! I'll have to go back and watch for the rappping and dancing part

[@DuncanCustomAirbrush]

Ooohh I know who dis now!! LOL My dawg!!

[@Altitude_Tumblers]

Thanks for the idea Taylor, that turned out great!

[@DuncanCustomAirbrush]

Hey sorry I just missed joining the Premiere this morning - I have the flu🤒

[@Altitude_Tumblers]

So sorry to hear that, feel better soon !!

[@billyshay7207]

You did a Corvette Summer pun, bless you sir 🙏 😁. I love that movie. Don't know the age demographic of people who watch your videos but, as soon as you said that line, I started laughing. It's truly an underrated gem of a movie.

[@DuncanCustomAirbrush]

Ahhh I knew someone would get my humor, lol!!🤣

[@hangten1904]

I think you can recreate the vintage hammered paint look if you spray silicone over metallic paint. It will have a textured look but the surface will be smooth.

[@djeskay.7945]

That looks like photo of the surface of the moon

[@kingswing00]

Discovered this by accident trying to clean up a spray mistake. It was one of those happy accidents and I immediately started doing it on purpose after that.

[@adamloveridge4100]

The bob ross of chaos. Love it.

[@DuncanCustomAirbrush]

i love it!!

[@dzzspotreptariumeducationa6340]

Omgoodness 😂 my husband has been watching you for awhile. I'm so glad he told me about your channel.

[@kelpiecoco7570]

I love experiments!! Here's one for you to try (if you haven't already) Mix you up some resin, any color but lots of super sparkly glitter looks fantastic in this technique. You can even use more than one color of resin cuz you're gonna let that dry completely. Then the next day take your cured resin piece outside and place it on a tarp or piece of plastic, or just put it on the ground if you want. Spray your pieces with Dawn powerwash (not too much) or just take some regular dish soap and drizzle it onto the resin pieces. THEN, grab your spray paint in a complimentary or contrasting color and spray it onto the resin pieces with the dish soap. You want to do this part fairly quickly. As soon as you spray it with spray paint, immediately pour a bucket of water over it or use the hose and rinse it off. Wherever the dish soap is, the paint won't stick and it creates some fantastic patterns. If you use the power wash you'll get a more speckled look and if you just drizzle regular dish soap you'll get some nice random irregular line patterns. Then your resin colors (and glitter) will show through the open spaces.

[@DuncanCustomAirbrush]

Ah thanks that's awesome, I have done both of those before and I have videos on my channel of it - you should check them out, you would love them!

[@justinmorgan8215]

Fire, a litlte mist, and laser beams 😂 That was fun, thanks for the inspiration, I'm gonna go and create something. Cheers.

[@suzannehurst4805]

Love this! Definitely trying this. Did you seal it and if so with what? Thanks for all your great videos!!!!

[@DuncanCustomAirbrush]

Thanks! Just another layer of epoxy and done

[@lilaflohr602]

You should try and add a bit of mica powder in the alcohol too. Amazing!! ❤

[@providencevalleyfarm5270]

GORGEOUS, I have old tables that need a remake & a lot of spray paint & epoxy sitting on the shelf!

[@mjohn4874]

I am an owner operator of EpoxieTops Resin Design. Try mixing mica powder into your isopropyl. same as your water drops but evaporate quick and metallic finish.

[@DuncanCustomAirbrush]

Thanks for the tip!

[@DamonMan]

What I'd like to know is, can you do the alcohol spray "mist" on a vertical surface? Or will it run? 🤔 I have an idea for a project and I won't be able to lay my material flat.

[@lindanicodemus9306]

Love it!! You can also add some different colored mica’s to your alcohol spray. It makes a cool effect too!! I’ve used a white pearl mica alcohol spray over marbled epoxy and it came out super cool!! Thank you for the video!!

[@ZippedUpKitz]

That table top came out awesome…. Now you need to refinish the rest of it to make it cohesive!!!! It’s absolutely gorgeous!….

[@sethdel5337]

Beautiful! Thank you!

[@NTSRFR4]

You can create a marble effect by using spray adhesive and spraying a piece of glass and then spraying colors like black and green or whatever colors that you want, kind of at an angle, like a hit and miss kind of pattern. Then flip the glass over. If it's on wood or something, you would need to seal it all in with epoxy or something.

[@DuncanCustomAirbrush]

hmmm, I am trying to picture what you are describing. Sounds very interesting but the spray adhesive is throwing me off. Can you message me on Instagram?

[@NTSRFR4]

@@DuncanCustomAirbrush Use something like 3M spray adhesive and spray it in "strings" across the substrate. They will look like veins like you see in marble.

[@LilDirt12]

I swear my brain is the same as yours. It's hard to choose which thought to go with. Your very entertaining!! Came out totally like outer space! ❤

[@DuncanCustomAirbrush]

LOL, you should see me editing these videos - wheeew!, LOL

[@NBC_NCO]

Creative people smell a lot of paint. This is where creative genius comes from. Very cool. I like it.

[@johnmalcolm9980]

A dangerous comment.

[@NBC_NCO]

@johnmalcolm9980 We used to be able to play with M80s. We are removing natural selection through laws.

[@shastina5493]

It was refreshing to watch you create as you do! I had to laugh because some of your phrases I use too! Nice to see a creator doing what he loves having fun fun doing it too! 💯

[@DuncanCustomAirbrush]

Thank you!

[@Kelley-i5z]

😂 this is why I love watching, you are so funny and of course you're very talented. I can't stand the videos where people are just not talking and when they do it so low monotone very very slow motion lol so thanks for the laughs...oh yeah and great sound effects 😅

[@DuncanCustomAirbrush]

LOL you're speaking right to my heart!

[@PapaLyser]

Also don't forget to try thin layers of silicone, use flame to get rid of the grease, creates interesting patterns also.

[@fyahssab]

This is super cool. I love how it looks. Creative.

[@laurielaurie8280]

That came out nice :)))

[@chrisdye5916]

I thought about that to after seeing you finished it i would like see the next one really enjoy watching your videos

[@DuncanCustomAirbrush]

Thank you!

[@loriamora6202]

an artist is never scared

[@trishgage9288]

Looks like the moon's surface. Very inspirational for a space themed room

[@richardemele7056]

Awesome! Luv it! Ventilation ventilation ventilation!

[@timekeepsonslipn]

Try Dawn dish soap with water in a spray bottle light mist, if you haven't already . You'll probably like it too 😀 . Love how you're just winging it. Love to hear you talk it all out and the "who cares" lol

[@DuncanCustomAirbrush]

Great idea!!

[@ronjon5386]

I think it would look great with some transparent candy blue over the top. Or any color you like.

[@DuncanCustomAirbrush]

I agree!

[@APOKreations]

Wow!! It looks like the surface of the moon 😮

[@DuncanCustomAirbrush]

ABSOLUTELY!!🌙

[@aaabeverages7152]

Sat and watched till midnight. Trippy paint job.

[@DuncanCustomAirbrush]

Wow thanks!

[@princessmustafa3848]

Did I get lost for 3 hours learning new paint treatments? Yes, yes I did and writing down all future projects! Thank you!!😊

[@teamredwaltz6249]

You've been watching "Stone Coat Counter Tops" Very nice buddy.....

[@DuncanCustomAirbrush]

lol, I love those guys - so much energy!

[@teamredwaltz6249]

@@DuncanCustomAirbrush me too.....I've been wanting to try some of that on a small piece of wood to see how it turned out.....I like your idea too

[@JoshWalshMusic]

Nat and I don’t want the River table. We want an island table!

[@DuncanCustomAirbrush]

...and we have to go to an island to make it!! (write-off😉)

[@BentleyJones-q4e]

Can you use regular rubbing alcohol you buy at the dollar store to make the cells?

[@michellerose3322]

😂😂😂😂 the 🔥 and his expression 😂😂😂. Amazing!

[@starvethebeast6480]

There seems to be a direct correlation between creativity level and spray paint inhaled.

[@DeborahThird-og1uo]

Or alcohol imbibed 🤣

[@williamschuhmacher3468]

ALWAYS READ THE LABEL. DO AS THEY SAY. Many moons ago I studied toxicology in college and there are some things you do not mess with: fire and the fumes of spray cans. You only get one set of lungs. Remember the Mask of Zorro.

[@monica2375great]

Just found you! This was the 1st time I laughed, had fun and actually learned something really amazing! I've had a learning disability my entire life so it's hard to retain information. Make it fun, make me laugh and I am tuned-in! I subscribed! TY

[@debrahaberman5592]

Wow!!! I totally LOVE this!! What fun! Great result!!! ❤

[@BrandyAnnDesign]

River table. But maybe red/ lava flow? Instead of blue? ❤

[@sandysacrylicart6925]

You are hilarious.... love how this table turned out. This is the first video of yours I have watched. I'm hooked, will have to check them all out!!

[@BentleyJones-q4e]

Love to see how you do a river table!

[@taffyseaman3053]

I haven't been watching your videos because I've been sick but now feeling better so thank you for the video. I love it❤

[@DuncanCustomAirbrush]

Welcome back and glad you're feeling better!🙏

[@leeoCraftylady]

I sure do love watching you have fun 🙂and the great ideas are nice too! Thank you!

[@DuncanCustomAirbrush]

Thanks so much! 😊

[@druidldn1326]

Would be great if you had a second camera from above that you can cut to of you working on the painting. Looks dope btw

[@DuncanCustomAirbrush]

Yeah that would be cool - hopefully one day I will

[@jonathanmosher3974]

Good video man good video making skills, creative stuff and a little bit of comedy mixed in keep it up

[@DuncanCustomAirbrush]

Thanks bro!

[@cindyherbold2384]

❤ that table turned out great! I like your sense of humor 😊

[@DuncanCustomAirbrush]

Thanks so much! 😊

[@Marchello-wk6um]

Always good to have a fire extinguisher next to your art work.

[@DuncanCustomAirbrush]

You got that right!

[@blacktoothgrin4348]

Bob ross of table painting! Nice

[@DuncanCustomAirbrush]

haha, what a great compliment!🙌

[@mamascorpio]

Been doing upcycling stuff with cardboard myself. Lol... using as a surface for projects, wall sculptures, and...paont spreader for glazing backgrounds.

[@DuncanCustomAirbrush]

cool!

[@DuncanCustomAirbrush]

I made a Halloween mask out of cardboard once