Building a 1,000 Horsepower Honda 4Cyl Engine

Building a 1,000 Horsepower Honda 4Cyl Engine | ASMR

Рет қаралды 156,154

Күн бұрын

Пікірлер: 114

@TunnerLyfts 7 ай бұрын

Am from africa and i study mechanics n believe me when i say our lecturers use devins video to explain some of the things we do🙌🏿

@Mekaeshi 7 ай бұрын

That's cool 100%

@Bunguth 7 ай бұрын

That’s so sick

@EmogiiKairo 5 ай бұрын

Cap

@issi615 16 күн бұрын

⁠u hating

@Fahrenheit_Motorsports 7 ай бұрын

I’m hoping Devin decides to do an LS build someday. Super easy motor to work on and the smiles per hour are great if you supercharge or turbo them.

@andrewarneson7098 7 ай бұрын

I feel devin would look good in a grand national

@gian19791 7 ай бұрын

Yup American domestic engines and European engines too

@jessehickle7370 7 ай бұрын

Should get a g body and ls swap it. Doesn't have to be GN

@crtpeljhan4287 7 ай бұрын

I like to see build B58 supra or Bmw😅

@pranaykedia1271 7 ай бұрын

Honda's are easiest to work on dam easy a 12 year old can build it

@TheMegaphone77 6 ай бұрын

chiropractic back cracking and torque wrench cracking is just as satisfying

@austinlane1451 7 ай бұрын

You’re a stud brother! I know cameras make it look like you’re having a fun time all the time, but you’re a naturally gifted mechanic! Good stuff bro

@FinalDriveRacing 7 ай бұрын

great job man, that valve adjustment i would get your self a bend feeler gauge.

@pistonfury 7 ай бұрын

These builds are the best!

@pistonfury 7 ай бұрын

Oh I love it when Devin does an engine build.

@Niko-iw1sr 7 ай бұрын

That three bond gasket maker Devin is using has to be the best gasket maker you can get these days!

@dailydriven991 7 ай бұрын

Damn that was relaxing to watch. And got me super motivated to go work on my car. The clean, silent atmosphere is perfection 👌🏻

@muhdrazwan9609 7 ай бұрын

Wow honda memang laju laa di dunia nie😂😂mantap laa 👍

@horaciomigueles2131 3 ай бұрын

Dude beautiful video with out a single word, lovely video.

@kevenw.7155 7 ай бұрын

this makes me wanna work on something. God I love these videos. Devin you have my dream job. Never forget to count your blessings.

@Uswesi1527 4 ай бұрын

A true and proven demonstration in the path of nothing, but, PERFECTION.

@MrGhastlyMonkey 4 ай бұрын

What are those metal wires you were installing on the top of the cylinders at the start? Whats the use for it , so interesting have never seen it before

@9krpmlol 7 ай бұрын

7:30 why only put RTV in those two spots and not the whole thing? Genuinely curious. Never had a Moroso pan.

@dombes1608 2 ай бұрын

wondering the same here

@haydnvankirk7367 7 ай бұрын

what a baller video brother the ending scene had me ROCK solid bro

@j_zales1390 7 ай бұрын

Why did you pound the fire rings flat ? Aren't they supposed to stick out and become compressed by that head to make a better seal?

@Swagolisious2 Ай бұрын

Didn't even torque the crank bolt. Shiet. I'm playin. This was beautiful

@MrIcedemond31 7 ай бұрын

Make sure the fire rings seam is lined up with a head stud

@Fahrenheit_Motorsports 7 ай бұрын

Just sitting down for lunch. Let’s go!

@carlosramos2243 2 ай бұрын

1:13 What are these rings for??

@ViruzZz94 14 күн бұрын

They put more tension on the Headgasked for better sealing. Its a common use for enginges which run on high boost pressure. hope that will help you :)

@AmirMehdiSavaedi 7 ай бұрын

Nicee jobe man❤ Love you from iran🇮🇷

@spoolinekrhdhulk-urban-c-w5709 7 ай бұрын

When you put the washers on its supposed to be like bearings 2:46

@evoxmania 7 ай бұрын

a silent treatment that actually educational.....🤣😂🤣😂🤣😂

@Daniel-vf5oc 7 ай бұрын

Lays dimes with that RTV!

@dreednlb 7 ай бұрын

Devin is one of the most meticulous engine builders I've seen, yet he also has to rebuild more engine due to failure than anyone I've seen. Very strange.

@Jonny_trans 7 ай бұрын

The thumbnail 👌🏻👌🏻

@markwalters4643 7 ай бұрын

im hoping you put those rings closest to head stud bolts for more clamping torque

@j_zales1390 7 ай бұрын

The rings go around the piston cylinders

@spoolinekrhdhulk-urban-c-w5709 7 ай бұрын

10 and 12 mm with screwdriver valve lash 6:39

@spoolinekrhdhulk-urban-c-w5709 7 ай бұрын

Don't all you ladies and gentlemen copy me but when I get on here I feel like I've become a family member 4:37

@frijus100 4 ай бұрын

i put pistons in engine block with new rings and when i turn over i see some scratch on cylinder wall?

@DanielGarcia-hq9dp 7 ай бұрын

i thought you said you wearnt pulling oil pick up and stuff. did you pull a bearing cap?

@irvingtorres5316 7 ай бұрын

#DevinNimela the rocker arm Gauge you used on the rockers you should of had bent the tip a bit so you can get a real size cause the way you used it it might have left your rockers a milimeter more open

@theblackmambaplague 7 ай бұрын

The oil pan on these don’t need a gasket or sealer?

@bachvan1993 2 ай бұрын

Why you do not use the glue at oil gasket ?

@Hoopers_s 7 ай бұрын

Why not have the block and head machined for a proper fire ring heasgasket set?

@JDMWork 7 ай бұрын

I thought you are suppose to put RTV on the oil pan.😅 Never have had a Moroso pan so I am not entirely sure.

@stefandicitrajaya9746 7 ай бұрын

why is it so beautiful

@sebasoilher8454 7 ай бұрын

What camera and lenses are you using to make the video?

@jclc4201 7 ай бұрын

My boy is being quiet again. Nice vid man.

@farmerbill4052 2 ай бұрын

Interesting, no gasket for the pan at all?

@brandonhanson1622 7 ай бұрын

Why did you only seal one side of the valve cover? Learning myself so don’t judge.

@gamoto7685 2 ай бұрын

Does any one know what the part number is for these pistons?, what compression will this have & the most boost it will reach?.

@ranjitsian5481 7 ай бұрын

Good work 👍

@spoolinekrhdhulk-urban-c-w5709 7 ай бұрын

I promise you with vtec it will make more power 3:43

@pauloivanovic2429 7 ай бұрын

I’m waiting until Devin discovers the 5 cylinder

@timchase6473 7 ай бұрын

I'd love to see the blooper reels to these ASMR videos. There's No way you didn't drop a few F Bombs or other words of encouragement 😂

@learningme9377 3 ай бұрын

Crazy time

@kendallcamacho.11 7 ай бұрын

Beautiful video

@jerroldwhitfield5831 7 ай бұрын

Bro the way u tightend ur cams down could have broken ur cams u should have tighten those bolts evenly down 👊🏾👊🏾

@MCMS331 7 ай бұрын

ASMR vibes 🤙🏽😎

@cecilschelborn5668 7 ай бұрын

Wat is the wire thing u using in the block

@ernestardjosentono9851 3 ай бұрын

what brand sillicone is that ??

@Boostlee 7 ай бұрын

Devin that oil pan will leak again, seems like you didn’t put silicone all around. I may be wrong

@AWD_T 7 ай бұрын

You degree the cams?

@faise922 7 ай бұрын

Does anyone know what sealant devin uses

@marianoherrera6038 5 ай бұрын

Most likely The Right Stuff by Permatex

@vincerussell7121 7 ай бұрын

Smoooth!

@steezjenkins 7 ай бұрын

You are a pro with that caulking gun. My 2$. If you use your gloved finger to spread it thin on both parts. You'll have less push out and a better seal. Cheers!

@TheOriginalSpawn 7 ай бұрын

Salute 💯

@waymenlawrence2064 7 ай бұрын

Degree the motor?

@nasosnasos8054 7 ай бұрын

Price ?

@kylewilliamson2038 7 ай бұрын

Its all about the views with the ASMR. KZbin must have a favorable algorithm to it because they're getting hundreds of thousands of views on those videos. I get it from a business stand point but do it on a tear down that doesn't matter. Not the assembly that everyone is watching and wants to learn. Come on Devin your doing us dirty in favor of the view's.

@ВадимДрандалуш-ч2д 7 ай бұрын

К20 или К24?

@spoolinekrhdhulk-urban-c-w5709 7 ай бұрын

Rick James 😂😂😂____$ 9:01

@tomswindler64 7 ай бұрын

Very nice 😎😎😎👍👍👍

@kylewilliamson2038 7 ай бұрын

Was hoping you'd teach us how to properly install the fire rings but we got another ASMR instead. ☹️

@chubbychubs4636 7 ай бұрын

Can't wait to see him blow it up on the dyno. A pattern is emerging... 😊

@AmuriniDrug 7 ай бұрын

Bro, you really can👍

@WisinCisneros 7 ай бұрын

I hope someday Devin buy a American car like a srt4

@Its_Nellllll 7 ай бұрын

I really wanna see the 2jz built🥹

@Karib9 7 ай бұрын

🔥🔥

@littlereptilian7580 2 ай бұрын

1000hp? With what?

@joaoarielaraujo5176 6 ай бұрын

Honda H series?,B series?,K series?,f series?

@comradecrawford3318 5 ай бұрын

It's a K

@jeison002005 7 ай бұрын

Y la prueba?

@satariel8652 7 ай бұрын

El video dice armado, no prueba. La prueba está en el video del civic en su canal

@jeison002005 7 ай бұрын

@@satariel8652 pero yo lo quiero escuchar!!!🤣

@NorSuhada-r4p 6 ай бұрын

Salam dari Malaysia

@alexsevo6 7 ай бұрын

UHHHH NO PIL PAN gasket ?

@JTC006 7 ай бұрын

Nice....the sound of metal and all.. 😅

@spoolinekrhdhulk-urban-c-w5709 7 ай бұрын

Oil will be everywhere if you dnt cover that up 6:06

@PRYRA 7 ай бұрын

ASMR Zaddy

@rolandotillit2867 7 ай бұрын

Titanium retainers and aluminum rods don't last.

@Karpofcarp 6 ай бұрын

Whys that?

@rolandotillit2867 6 ай бұрын

@@Karpofcarp Aluminum has a fatigue life, it's not like steel, if you don't deform steel it'll never fatigue. With aluminum rods it's not a matter of if, but when. Titanium retainers are lighter than steel ones, so allow you higher revs because of the lighter valve train, but it's not as tough as steel. The rockers will eventually start wearing on the retainers. You want a high revving Honda engine, get S2000 valvetrain stuff. The oil pump and the valve train is good for 9,200rpm reliably. I don't think you need to rev more than that.

@Karpofcarp 6 ай бұрын

@@rolandotillit2867 ok fair point, I just thought aluminum would be good for weight reduction

@rolandotillit2867 6 ай бұрын

@@Karpofcarp It is! It's great for reducing weight, but it's really expensive because you have to replace the rods constantly. You don't have to do that with steel rods.

@Karpofcarp 6 ай бұрын

@@rolandotillit2867 so since I'm going to do the same build stay away from aluminum rods and go with regular steel then?