Opening headlight after baking it in the oven for 10 minutes at 200 degrees. Note that this can only be done on 2001 and 2002 headlights.
Пікірлер: 37
@IncognitoX83 жыл бұрын
Imagine thinking that it would be a good idea, to have radio blasting on max volume during this video........................
@adambomb7892 жыл бұрын
I was hoping he at least got some money from Trident
@SAABguyMD Жыл бұрын
I hope mine come apart that easily! I found brand new lenses for a hundred bucks, polishing only works so many times. Thank you for the video!
@eitanmizrahy98408 жыл бұрын
The radio in the back round is anoine
@griptopia7 ай бұрын
it's rare for them to come apart that easy, normally it's a fight and a half.
@MHD_854 жыл бұрын
Hello how did you do that how I opened the lens cap? I tried with a 2000W hot air gun and it didn't work I'm so sad I want to change these pieces
@SileX406coup8 жыл бұрын
so the headlight was still hot, when you opened it?! Did I get that right?
@noodle3722 жыл бұрын
I really want somw Trident gum now
@Alpejohn5 жыл бұрын
You did not tell people that there is a screw at the edge of the turn signal side.. Someone is gonna break it open..
@heavyseven884 жыл бұрын
Ooh that sounds awesome, thanks, my car 1/97 m54 e39 5spd
@MatthijsvanDoesburg Жыл бұрын
Thanks :)
@UberGeek2 жыл бұрын
I wish my lens would come out so easily! Mine has sticky seal that is super difficult to get this apart. I will try a heat gun. Thanks for the tip.
@charlesmacias14897 ай бұрын
Mine too it breaks ang i need a new fucking entire headlights
@tubata1116 жыл бұрын
Mine's are 2002 onward do i know how to open them.
@danikasuomi8 жыл бұрын
So, the lenses are just that easy to remove with a screwdriver? No glue? I have to replace just the lenses (or clean/polish them). Thanks!
@asmircar1 Жыл бұрын
read description of video
@seanwilks77125 жыл бұрын
Not going to mention or show the epoxy they used to seal the lights. This videos shows him taking aftermarket ones off.
@hungryforspeed5 жыл бұрын
No these are factory lights. Ones produced before mid-2002 have bakeable sealant, not the permanent type
@AugustBMW9 жыл бұрын
hi when you are putting back glass, need to use extra glue or smth like that?
@asmircar1 Жыл бұрын
butil tape, same for door carts. But buy oem butily tape from bmw, others suck dick.
@rogercarballeda16674 жыл бұрын
European specs from 2000 to 2003 can't be open. Are epoxi glue.
@grete61002 ай бұрын
Really?
@rogercarballeda16672 ай бұрын
@@grete6100 yes It is. You need cut It if u wan to open it. Actually it's not epoxy is polyuretane glue like windshield
@grete61002 ай бұрын
@@rogercarballeda1667 okay, thank you for answering 4 years later
@AngelGarcia-hu7fe Жыл бұрын
Alguien Sabe de algún taller para reparar. En California de preferencia en el condado de Ventura CALIFORNIA ó los ÁNGELES CALIFORNIA AY PORFAVOR
@thechronic555 Жыл бұрын
I really dislike youtube for removing the dislike count.
@BmwAlfa123 Жыл бұрын
Why not use plastic tools that don't scratch???
@murielleritz12852 жыл бұрын
Bonjour moi je n'arrive pas à. Enlevé la vitre de les phare...
@cynthiamendez70678 жыл бұрын
so its impossible to replace 2003 e39 headlights lens with euro specs ?!!!
@hungryforspeed8 жыл бұрын
please read the description. 2003 lights cannot be opened.
@cynthiamendez70678 жыл бұрын
why thought ?!
@hungryforspeed8 жыл бұрын
+Cynthia Mendez Hella changed the type of adhesive used on the lens. the newer lights are effectively glued shut instead of sealed with butyl rubber like the older ones.
@ANDYW0310848 жыл бұрын
I have a 2003 bmw 540 i was baking my headlight in 300 c and I couldn't Separate front glass they was Using Different Glue or silicone on this . I almost melted my headlight in the oven lol
@tubata1116 жыл бұрын
Andy and how did u manage to open them?
@tubata1116 жыл бұрын
Ive mine 2002 and i think its the same issue.
@asmircar1 Жыл бұрын
sreten from m539 restorations said 2003 models cant be opened.