EagleVisionCam Dovetail-Picatinny adapter

Introducing the EagleVisionCam PDRA150 dovetail-Picatinny adapter rail, including some wee improvements over the average rails you may have seen / be using.
eaglevisioncam...
This rail could suit any rifle, to be thorough from @4:03 I check if it will hinder ejection from my two CZ455 rimfire rifles.
Nice simple kit, very well made and finished.
More honest kit reviews coming very soon, including more from EagleVisionCam…
• 30mm/25mm height-adjustable two-piece Picatinny mounts with dovetail adapters and detachable spirit bubbles: eaglevisioncam...
• FX Wildcat magazines (with improvements): eaglevisioncam... …and detachable scope-rail brackets to hold them: eaglevisioncam...
… then post-lockdown when I can get out to the rifle range and do some filming with my rimfire rifle(s) and dayscopes…
• 25%/75% GoPro Side-Cam scope mount: eaglevisioncam...
• DIY Action camera ring set for the side-cam: eaglevisioncam...
#Eaglevisioncam, #dovetail-picatinnyadapter, #CZ455adapter, #IndependentReviews, #HonestReviews, #TechnicalReview, #DayandNightpestcontrol, #RussDouglas222, #DisabledReviews, #DisabledGunReviews, #UKNVforum

[@212caboose]

This is exactly what I've been looking for! If my current solution isn't to my liking, I'll get one of these. Thanks for this!

[@RussDouglas222]

Happy to help, good luck! Cheers. Russ

[@user-mc2kk8yf5z]

can it fit 25mm dovetail? or over 20mm@@RussDouglas222

[@RussDouglas222]

@@user-mc2kk8yf5z Contact Masood at @eaglevisioncam and if he can help you, he will. 🤓

[@ralphtaylor9968]

Yup, I use these now and have converted completely from dovetail to picatinny using these, on all my guns. They are excellent.

[@stephenoshea1166]

Great, this was exactly what i was looking for, to see if it would wotk on my cz455 so i can use my alpex which is in a 1pc weaver picatinny mount for use on centrefire primarily.

[@bramzuijderduin]

Hi Russ thanks for sharing and good to see you...and you Coke can, are doing well👍

[@RussDouglas222]

Haha thanks Bram. 👌🏻🤣 Hope you're well too? R

[@jamesbruce8749]

The little screws on the spring direct mounts are just horrible and strip real easy, makes them less then useless. Get the ones with the Allen heads.

[@alanmullock381]

Nice bit of kit👍👍👍👍👍👍👍

[@RussDouglas222]

It is indeed, well thought-out and nicely finished. 👍🏻

[@Lij_MC]

Hi Russ that second dovetail to picatinny adaptor with the MOA adjustment looked interesting... Do you have link for that 1?

[@kevvyboy63]

Nice one russ I'm going to get one for my 455. Great price.

[@emmarowley1096]

Looks a good bit of kit

[@RussDouglas222]

Hi Emma yep something simple, but great to see UK-made top quality kit. Wait till you see the adjustable mounts, they're 😍👍🏻 Cheers. Russ

[@norfolksquirreller]

I had been going to mill a 13mm slot into the underside of a Tikka T3x weaver rail, strip down my BSA R10 and drill and tap the dovetail to accept the modified weaver rail. Looks like I can put that project to one side 👍 Ordered a Titanium Gunworks QD mount for the NV008lrf as I want to get away from shims, I have to shim for both elevation and windage on my R10 and Tikka T3x, interestingly the shims are the same for both rifles which would suggest the stock mount is not true. I now hope to swap the sight between my three rifles without loss of zero, just change to the correct profile. Now to order the PDRA150.

[@RussDouglas222]

Nice one, I have a few more accessories from EagleVisionCam to review, including items that impress me even more with their clever designs and impressive build quality. 👍🏻

[@norfolksquirreller]

@@RussDouglas222 Bought one of these and fitted it to my BSA R10 and mounted my NV008lrf with the Innomount QD rail. It was difficult to get the mount on to the PDRA 150 so I measured the rail, the Picatinny standard is for a width of 0.835" -0.005" the measured width was 0.849" oversize by 0.014". Using the standard PARD mount this wouldn't matter, however, the Innomount is a precision mount that gives minimal clearance for mounting. Not a major headache, I gently filed 0.010" of each side of the PDRA 150 and polished it ready to re-black the edges. The resulting fit is perfect I have zeroed at 30 yards with -42 windage and -2 elevation with an 0.4mm shim, which I'm happy with. The PDRA 150 is a good converter and a definite improvement over others on the market.

[@RussDouglas222]

@@norfolksquirreller Thanks for that info, I'll pass that back to Masood. Cheers. Russ

[@eaglevisioncam6556]

Norfolk Squirreller Hi David , We don’t work with inches email us where are this measurements by mm and point where you meant. If you are talking abut width after you install that on your BSA R10 with 13mm rail you should have abut 21.21mm +-0.20mm. our 13mm rail it’s made for only 13mm rail to 21.21mm picatinny if your rail has big tolorenc you may have issues plus we don’t guarantee any of Chinese picatinny works with our rails as some of them are not standard. already email you the standard. The PDRA-150 it’s 11mm to picatinny the PDRA-13 its 13mm to picatinny just make sure you using the right one for your rifle.

[@superfisto]

thanks

[@TargetBreaker1234]

Good review Russ! Eagle vision is great kit, I built up the full iphone camera kit, and used parts for my nitesite nv set up as well. i actually reviewed it on my channel if anyone wants a see it in action! Masood is a great guy as well and always keen to hear feedback.

[@olivergutierrez9796]

Good video A question is the picatinny rail on the upper part 20mm or 22mm.???

[@Nighthunter-qq6fo]

Brilliant Russ,so i have no need to remove my dovetail rail from my cz 455,and this picatinny rail will sit on top and screw into place and tighten up securely, and a very good price as well,where can i get this rail from,??

[@RussDouglas222]

Hi Tom, the link's in the description - or here: eaglevisioncam.com/shop/scope-mount/20mm-picatinny-to-11mm-weaver-adaptor-150mm/?ref=1506 Cheers. Russ

[@freeforester1717]

Are you sure the locking Allen screws are an advantage Russ? I can imagine a lot of stripped threads owing to "over eagerly" tightened rails, lol!

[@RussDouglas222]

Well perhaps, but with four side screws applying a lot of friction along the 150mm bearing surface, plus the two (fatter) vertical grub screws -I can't see you needing to tighten them unduly. The Allen head screws are quite small, so I'd take it easy on them. 👍🏻 R

[@Bestdayever22]

Would this work on a TX200 with the the vertical stop holes?

[@RussDouglas222]

Hmm you mean recoil arrestor stud holes? I don't see why not, but email Masood at EagleVisionCam to be sure, you could include a photo of the rail. Cheers. Russ

[@Bestdayever22]

@@RussDouglas222 I emailed him and he said that it wasn’t built for that. I’ll keep looking!

[@dominicderbyshire980]

Hi, Russ. Will this fit a 3/8 dovetail? I'm having a nightmare finding a rail to fit a Pard 008 to my CZ 452 American HMR. I tried Bruce's idea of ANT supplies dovetail to weaver adaptors, but the unit is not holding zero. This rail looks like a neater solution. Keep the great videos coming!

[@RussDouglas222]

Dominic, hmm 3/8" is 9.5mm... I just measured it and when fully tightened this version has 8.9mm between the 'grippy' edges of the rail; so I think this one should do it. The other version is larger, to fit the BSA 13mm dovetail. Cheers. Russ

[@dominicderbyshire980]

RussDouglas 222 Thank you. Yes, I can confirm it fits, having taken a chance on one of these rails. Zero problem solved! The rifle is holding zero, too, and is very accurate. What a great bit of kit the Pard is. It’s no Drone Pro, but it’s very good for what it is and a fraction of the cost.

[@RussDouglas222]

@@dominicderbyshire980 Great to Hear, enjoy! Cheers. Russ

[@zethjonimagauzethjonimagau2648]

How to order it........?

[@RussDouglas222]

eaglevisioncam.com/shop/scope-mount/bsa-150mm-dovetail-to-picatinny-weaver-13mm-to-22mm-rail-converter/?ref=1506

[@308hit]

Eagle vision cam website is gone....

[@RussDouglas222]

Hmm still works for me?? Cheers. Russ

[@308hit]

@@RussDouglas222 I'll check again thank you