HG KYRIOS CUSTOM BUILD!

[@tedkazaq4260]

watching somebody build is so satisfied , love the color nice work

[@EAGunpla]

Thank you so much..!! 🙇🏻‍♂️🙇🏻‍♂️

[@MrFernoid]

The HG kits always seem so low quality, but the colour scheme, the finish and the custom work you did really made this a work of art. Amazing job.

[@EAGunpla]

Thank you so so much!!! I really appreciated it! 🙇🏻‍♂️

[@danialjafri5602]

@@EAGunpla how bout Harute final Battle ver. custom in future 🔥. It my suggestion only 😂

[@malahmad5265]

I TOT THIS FROM JAPAN AT FIRST, THEN I SAW MALAYSIA !!! JUST WOW WELL DONE BROO !! PADU BAK HANGG

[@EAGunpla]

Ahahaaha terima kasih bro..!! Terharu pulak dengar pujian bro 😆😆😆

[@alip1207]

@@EAGunpla hebat lah kau... 👍🏼👍🏼👍🏼👍🏼

[@one9stand898]

well done bro. Malaysia Boleh!!

[@izu1624]

Mantapp

[@izamuu5227]

Orng Malaysia ka dia??

[@dannypham2109]

After watching this I realize there are no ugly kits, it mostly depends on modelers’ skills

[@g-gremory9686]

100% correct, i just paint my dynames and it looks like trash, i need yo get an airbrush

[@OffMetaGOAT]

cough cough hi nu gundam

[@chloekaftan]

you obviously havent seen the old mobile suits, fucking ugly chonkers those are.

[@OffMetaGOAT]

chloe kaftan yes agree but rx78 wasn’t bad back then

[@relicvault1515]

Imagine a kitbash combining ALL the Celestial Beings’ gundams.

[@SOBERABSORBER]

Noobies here. Baru je berjinak jinak dengan gunpla last 2 months untuk accommodate rasa down dalam kehidupan. mostly seronok basic build HG model je. Hopefully aku boleh terus ter-inspired nak try painting and customization. P/s: power doh hasil kerja kau!

[@EAGunpla]

Terima kasih banyak2 bro..! Hehe bro boleh punya. Start slow2. Buat simple custom dlu. Jgn terus jump ke custom yg susah2. Blajar remove seamlines dlu. Bila dah biasa dgn tools smua baru try custom yg lebih advance 😁

[@azwanskylark2228]

terbaek bro, bangga sikit org Malaysia 🙌🏻

[@_herrick3560]

Great and tidy works! The more tidy it is, it is much easier to find out the defects made. But I can't see any of it, which means it is perfect work! For masking like 15:46, I usually paint the lower level (those area in middle in this shoulder) first, because there would be lower chance of failure and infiltration of paint.

[@spacehooman_4802]

That's what Hallelujah would pilot! 🔥

[@darkgeno492]

I never know that someone in malaysia have made gundam custom.... I'm very proud of you...

[@nxstf2108]

When u can't wait for MG Custom Build the HG

[@MrKt25]

nxs tf2 thinks they have MG Kyrios now ?

[@CampCupCulinary]

😍😍😍 that green colour is absolutely fabulous. Love your works.

[@EAGunpla]

Thanks dude..!! 🤩

[@LEROIDICUSII]

When the colour scheme hits just right :oksign: Lovely work as usual! Always a pleasure seeing you work

[@ド田舎ジオニスト]

I was a Japanese, and recently I started to play ganpura and I was very impressed to see this video.

[@EAGunpla]

Im really glad and happy japanese notice my work! Thank you so much..!!!

[@GibbonsWorks]

Wow! Beautiful colors!!! I really need to get me one of those paintbrush!!

[@liltlecutie3728]

Seriously bro, your effort and patient. So detail. Elok elok high grade jadi premium plus hi res terus. And onemore thing, macam therapy bila tengok your handwork sampailah finishing product. Keeping up bro, and stay safe 🙌

[@EAGunpla]

terima kasih bro..!! really appreciate it! you too, stay safe bro! :D

[@lamperouge7347]

Just realize you are from Malaysia so I subscribed to support my fellow Malaysian.. Mantap bro!

[@russellleepunzalan2222]

Love the way you built it. The color scheme was simple but looks great with those added details

[@DrODoki]

Nais, lawa pulak Kyrios dia punya angular shape ngan kaler stealth mmg ngam~ terbaik!

[@EAGunpla]

Hehe tq bro..!! 🙇🏻‍♂️

[@youtubeaccount4789]

Wow this looks really amazing! Kyrios was the first Gundam I feel in love with. His orange color scheme and claws made him stand out. Kinda sad to see such a uniquely colored Gundam change its color to the more common blue and grey but it still looks amazing! Also I found it really amazing how you cut certain parts away and carved into the Gunpla. I would never do that I'm to afraid of causing irreparable damage to it. PS what is that clear tape thing you used? was that just normal tape? Also how did you know where to put the tape to guide the carving? Did you measure it or was it just instinct?

[@stormeagle]

I just found your channel and I have to say your custom gundam is out of this world. Truly a sight!

[@shznhkimi99]

Saya mula minat dgn gunpla ni sebab b usha2 vid abang.. gaji nk beli first gunpla...n buat jadikan hobi baru gituw hehehe

[@mohammedhafizkhalid7608]

First time tgk video bro ni aku ingat modeller dr japan punya video, hasil dia kemas.

[@EAGunpla]

Tq bro..!! Terharu dengar!! 😭

[@mokhliseverything3692]

Cantik gilerrr... Nk try wat jgk

[@tanuki0899]

ガンダムキュリオスじゃん！！ 塗装もかっこいい！w

[@lab7eu]

super clean! love it 😁

[@maurodistano4092]

Hello! Amazing job Congratulations!!! Excuse the question, what airbrush is it? Thank you very much!

[@triplemchannel4634]

I don't know why i really want to say this but... "Metal cluster hopper~" "It's high quality"

[@dragonofblackfirex4858]

EVEN BODY JUMP

[@thucin_the_shirtvo7091]

Secret Material! HIDEN Metal~~

[@newbegin2947]

Hm

[@triplemchannel4634]

@@thucin_the_shirtvo7091 secret material BANDAI Plastic

[@arifsalahudin6673]

Aruto ja naito~ Eh what, not yet? 0_0

[@Rico-ir6hk]

Awesome af dude, great job

[@fikrijuraimi3957]

lah channel dari Malaysia ke.. ingatkan dari jepun... Teruskan bro.. aku suka.. aku harap cepatlah dapat 100k subcriber

[@IceCeberus]

Salamz@EA Gunpla,beautiful work as usual,kalau tak kberatan boleh tak buat MG Exia next?☺

[@koiandtsuru]

I am watching your video from Japan. Thanks for having interest in Japanese hobby.

[@amiruladli7586]

Hasil seni terbaikk bro👍🏻

[@SuperGamer-mt5oc]

This is gorgeous work! Perfect!

[@asmaan98ify]

Bro, boleh tak buat video on where you get your tools especially the names for it, so nanti boleh cari sendiri if tahu nama dia, tengok sanding block pun ada jenis2 lain and effectiveness dia pun lain2.

[@sapokbiki730]

Good idea... Ppl always show off their kits and how they do it but never tell what tool to use or specific tools for specific work...

[@kyumazu1926]

Shopee kan hado, dia ada buat video sebelum ni

[@Tommy27ZB]

wonderful color scheme... the azure parts reminds me the Jegan!!!

[@zam93stylo]

your dedication bro, Top Notch! seriously thought from Japan too until that RM3 silver rainbow sticker.

[@creeks6435]

Just perfect, thanks for sharing your work 🔥👍🏼

[@wezrauk]

Love the colours and clean panels! What are those decals you're using for the caution marks and numbers?

[@aleeyarzn7242]

Detail ngatttt bisye ahhhhh 👍👍👍👍

[@GerryStilton]

That's an awesome paint job!

[@atypicalmix1275]

😲you snip the joints so after gluing and painting you jus slide and snapem together!!! hit em wit da snip, slide, snap! (gunpla dance)

[@Jacob.DTorres]

Amazing! What was that metallic looking sticker you used for the legs?

[@KhoaNguyen-sw5hl]

From VIETNAM 🇻🇳 with love ea gunpla

[@najmi.d]

Gunpla custom build? Malaysian? Instantly subbed!

[@kenfung8551]

I did a similar colour scheme to my RG build strike last year. Good job on yours! thumbs up

[@SouffleDude_256]

New Master grade gundam kyrios

[@kenkenobi]

Awesome! Reminds me of the zeta plus c1. Amazing color scheme

[@helkai5629]

Amazing work, Whats your prefered tool for sanding down parts that you dont end up painting afterwards for a good finish?

[@thatkidadam2457]

wow damn bro i really love the blue. btw how fine are those sandpaper ?

[@laintme7857]

I died a little when he chopped the V-fin, but great builds nonetheless! Learned some very useful tips watching this👍

[@ns_wayne]

Good stuff! No waverider mode transformation?

[@yegplayegpla8904]

Freehand?!?!?! Nice work!

[@salamancero]

Awesome build! Btw where'd you get the decals?:)

[@laikevin3306]

love it, so nice

[@jruizagosto]

I've always wondered how you are able to just put everything together like that and still know what pieces go where. I would get so confused when it comes time to put everything together.

[@zrmblk]

this was beautiful, start to finish😌👌🏽

[@joshuaandersen2320]

Ok dam this is pretty epic I was a bit concerned when you when u where clipping certain parts to make snap in peaces but now I see I had no reason to. This is gunpla at its finnest.

[@EAGunpla]

hi there! thank you so much..!!

[@joshuaandersen2320]

@@EAGunpla np congrats on the awesome build

[@hallenmoon92]

Teruskan usaha. Keep up the good work. Rm3 gives you away

[@qccanales8610]

wow nailed it! congrats! wish I had the time and space for airbrush...

[@jethrojim219]

How do you remove the residue from the panel lining? Do you dip the cotton swab in a enamel paint remover?

[@placross]

remember to top coat first before using enamel paint. It will corrode plastic. You might crack your kit

[@secretadamirer6782]

Smart weh, hijau petronas tu

[@KAIJUCORP]

love the color

[@SergiOrtiz]

You did murder all those joints

[@thedaddygamerph1171]

where did you get the decals? great vid!!!

[@macfurry3214]

Excellent work! I believe this color is a lot better than the anime version

[@EAGunpla]

Thank you so much..!!! 🙇🏻‍♂️🙇🏻‍♂️

[@Millzieeeee]

sick build i think a little teal/blue on the helmet would have evened out the colour separation if i was to be picky

[@nammanngoc9684]

What!!!!!!!!! It so good bro!!!

[@EAGunpla]

Thank you so muchhh!!! 🙇🏻‍♂️

[@CheungYury]

This is Masterpiece

[@ignisblood]

this video is worth to wait.. amazing works as always on HG..

[@EAGunpla]

Thank you so much bro for your support!! 🙇🏻‍♂️

[@ignisblood]

@@EAGunpla it's rare to see hg build video on youtube like this.. People always do review mg kits or painted kits without process 👍👍👍

[@pixeldash3432]

Just wondering, what tools did you use to scribe panel lines? also great video.

[@BLAZE084]

That is an awesome paint job! Wow!!

[@EAGunpla]

Thank you so much!! 🙇🏻‍♂️

[@BLAZE084]

@@EAGunpla You're very welcome. That's a nice looking kit you built there.

[@SteelSevenPs]

Very nice build! As an 1/144 collector I would just like to inquire on what material you are using to guide your scribing? It's the transparent rectangular plates.

[@EAGunpla]

Thank you so much!! Oh, that tape is a scribing tape. You can get it from the brand called Madworks. They have a few size option. For HG i usually use 3mm scribing tape. 😁

[@SteelSevenPs]

@@EAGunpla Thanks much! I will use your videos as a scribing guide lol. Working on glorifying my 1/144s. Keep up the great work!

[@uzairothman3317]

Are there any color other than that can mix to become papermint color?

[@diiinpla5253]

sweet build! love it

[@chizmendez1259]

watching your build makes me motivated to customise my HG Gundam Nataku. My only question is, were did you get the waterslide decals?

[@GunplaKhaijue]

did glue and sanding fix the seamline?

[@justindavisphotography]

That looks really good. 👍👍👍

[@EAGunpla]

thank you so much dude!!

[@Grim_Unhinged]

Can the gunpla go into bird form or is it just the mobile suit form

[@Koragh_]

I love building gundam but i hate puttinf the tiny stickets.. i always have scratches or it doesnt move in the eight direction even with applying water

[@HorribleGamingFun]

Gorgeous

[@pierrejoy7861]

support kau slalu bro 👍🏻 klau ble lepasni buat star build strike

[@douggoins2960]

Nice job with kyrios

[@EAGunpla]

Thank you bro..!! 🙇🏻‍♂️

[@B143DP]

Where did you get that moisture trap for the airbrush? I am now needing one of these XD

[@danielhisham7110]

Where do you get the water slide decals for HG gunpla?

[@Joffruh]

Subbed AND hit the bell. This is absolutely beautiful; super dope 🔥🙏🏻🖤

[@EAGunpla]

thank you so much Jeffrey for your support!!

[@andresdelrio7464]

what is the logic behind adding epoxy putty? I like the idea, I'm just not getting it

[@Blazinter]

I love your videos so much. They make my day. Inspires me to try to be better >.>

[@FastLaneFPV]

I'm going to this colour scheme with my Destiny!

[@masjaprangunpla]

tidak sabar!!

[@EAGunpla]

Terima kasih mas!! 🤩🤩

[@UgtwauToku]

Nice color, the look so comfort but u miss the color line on head, if not V-fin I think u should green the chop fin for a perfect hightlight

[@danialxfactor]

bro aku suka hasil kerja kau! keep up!

[@fantastiCkiLler92]

Malaysia builder? Instant subscribe. I also work on this kit recently, what a coincidence

[@EAGunpla]

Yeah! Im a malaysian builder ☺️☺️ nice!! What colour scheme do you plan for your kyrios?

[@fantastiCkiLler92]

@@EAGunpla Original color, with kyrios gust resin parts :)

[@timothyjeremiahtaal1665]

what top coat did you used? can apply in airbrush?

[@adibnasir3980]

Duh idola nyeeeeee

[@ImBonez]

Do you build these for customers or are all your video builds for your own collection?

[@karldavid4621]

I like what you did in the video. Good job!

[@EAGunpla]

Thank you so muchh! Really appreciated it! 🙇🏻‍♂️

[@impetus_yt5421]

I like that kyrios gundam it's so cool

[@EAGunpla]

thank you so much!

[@impetus_yt5421]

It's like something from transformer grimlock

[@四季咲裏鬼]

プロトタイプ系のカラーリングってかっこいいよねー。

[@るるるる-y1o]

すっごいカッコいい！