EASIEST WAY TO INSTALL AN AIRDOG ON A CUMMINS!!!!!

ORDER YOUR AIRDOG HERE!
truckmasterdie...
Business [e-mail]
Instagram @dylanlee7.3
Do your shopping on amazon through this link, its a free easy way to support the channel!
amzn.to/3nvY3d...
Huge thank you to everyone for watching please like and subscribe to the channel!
Disclaimer: These videos are for entertainment purposes only.
Dirty Diamond Diesel is not responsible for any property damage/ personal injury occured while referencing content and or information shown in the videos on this KZbin Channel.

[@noxdout_cummins4247]

Thank you for a well put together video with all the proper facts and knowledge, hard to find good information.

[@jestes7]

ah man the beans is so much better now! I bought an older version and put the return line in the fuel tank inlet (as recommended). Only problem is the sump is right under it so it draws in air at half a tank! So now I'm having to re-route the return. The return at the sump is such a nice solution! Great video

[@jrkmotocross]

Thx for the discount code I just ordered my 464 Turbo from smeading and saved … keep up the good work and videos 👨🏻‍🔧 💪🏻

[@herculesinwyoming]

Thanks for the info, this is for sure on my wish list , with the OEM filters more than doubled in price this must be done.

[@jacobdicesare2032]

Glad you've been putting out so much content. Keep it coming man, good job.

[@dansdiesel3576]

That one barb on the sump is for a quick connect fitting. It is NOT a push lock connector

[@justinschooler6243]

Good video 👍 ur g56 truck is sweet, been looking for one but prices are crazy

[@windirono5409]

Remember to take a photo of the SN. If it ever craps out. You need it for the warranty claim. Sucks when you forget and have to drop it quick to get the details.

[@uhmlmfao]

Nice video but proper practice, especially having a sump, is to just gut your stock lift pump and just leave the fuel level float. Great content regardless 👍🏼

[@rddiesel1]

May I ask what the cons of leaving the original sending unit intact would be as I will be installing one in the near future.

[@lalo042087]

Great video but just wondering what you do with the feed Line in the oem sending unit if the new one goes from the sump pump to the lift pump?

[@cdpperformance2613]

I got the same kit with beans sump for my 96 ram 3500 12v cummins interested in installing ?

[@okatexoffroad1813]

So I have a 1st gen airdog on my duramax. People always talk about how quiet airdog is. Mine definitely is not. Maybe it's cuz it's the older model.

[@dirtydiamonddiesel5901]

Older AirDog units and the original style will be louder. The newer 4G and now 5G systems are VERY quiet.

[@tracyshrable4224]

I have a lb7 with an airdog 150 pump. If I upgrade to a pureflow, will I need to upgrade the wiring harness as well.

[@cameroncross7479]

Notification squad!💯

[@alexmoreno6660]

Nice and simple which u were in Houston tx

[@goruby2]

Dylan, What's the total cost for the install?

[@MikeHall-zu8no]

Just having on installed in my 02 going to pick it up in 30 mins . Shop said fuel gage isn't right . But before I took it to them it worked perfectly any ideas? I have ran it down to 50 miles till empty never ran out of fuel gas needle was correct

[@HunterRitchie]

I know this is an old video, but did you just leave the factory lines on the fuel filter housing for the return? Or did you take the feed line off of it?

[@alexmoreno6660]

Why is some people take the fuel pum out and start cutting some wires???

[@carvingray636]

What happened to Fass filters everybody was talking about them

[@dirtydiamonddiesel5901]

kzbin.info/www/bejne/bHfRdneVj8ila6s

[@_Backendbrian]

So if I added that on my truck would I have to get bigger injectors?

[@TehArtfulDodger]

No

[@manny1782]

Will this setup affect the mpg on a stock truck?

[@christophergonzales2627]

Is this setup a better option than a fleece powerflo kit

[@julleonfischer4877]

thanks I want for mine but definitely can’t afford.

[@chrisallen3741]

Nobody seems to inform me of the law regarding the sump…its an important topic…i cant afford to get it wrong

[@gregpelfrey5303]

What's the cost to install one of these ?

[@gregpelfrey5303]

Let me know please

[@r4yvalencia671]

I don't see the link for this kit can you post it to the chat please?

[@davelosonczy1537]

Ty

[@jeffgeer817]

What kind price you put it in

[@chrisallen3741]

You did a nice job….could you tell me if the sump is legal?

[@JeremyPrattigmp2u]

Airdog says they're CARB legal so pretty much if Kalifornia likes it you're good.

[@danielholland4385]

Why not just install new fuel line to the tank then into a secondary rear mounted fuel filter (added) 180.00 and then 1/2” fuel line from that all the way to the cp3? No airdog… if he’s just fixing a leaking filter housing that’s way cheaper and a straight 1/2” line rear filter to cp3… 🤔

[@JesusMiranda-h1w]

What part of indiana do you live?

[@mickeybinas]

Why would anybody ever drill a hole in the bottom of the fuel tank

[@dirtydiamonddiesel5901]

I do it all the time. Cheaper labor for install. Proven leak free design. No chance of sending unit tube cracking or leaking. A lot easier on your lift pump. Numerous benefits with very little risk. Oh wait it hangs down an extra what 2 inches big whoop!

[@mickeybinas]

@@dirtydiamonddiesel5901 yes but why you can be get a different version that does not have a sump. Just keep the tankful

[@goruby2]

Thanks Dylan , NEVER EVER VOTE DEMOCRAT.

[@bucketheadrox]

Just don't vote. Red and blue are making America weak as fuck.

[@chrisallen3741]

Can’t really see

[@reytech1786]

No way I’m drilling under my fuel tank

[@4bearsi678]

Why in the hell would anyone want the lines and sump right where something’s gonna snag it and likely rip it out! Looks like a shit design unless it’s for track use only

[@jayjackson676]

Too fast