Easton X10 Parallel Pro Arrow

[@wayneeden98]

I sure as don't remember thinking it would be rebranded, we can always change our minds about it later

[@KentonSteinke-gu8xg]

It seems to be like a old Navigator,and a A/C/G’s

[@Ken-xx8pu]

It’s not a new shaft…it’s the Pro Comp rebranded? Am I wrong?

[@jakesoudant6943]

That’s what I thought too lol

[@LuqmanHM]

It's a heavier Pro Comp

[@fahlvfaust677]

I guess the X10 4mm parallel GPi shaft might be a little lighter than the barrel X10.

[@enrique6335]

It's not. Procomps are pure carbon shafts whereas X10s are an aluminum core wrapped with carbon fiber.

[@jakesoudant6943]

@@enrique6335 pretty sure procomps have aluminum cores

[@davethompson5553]

Not checked all spines, but the 420s are exactly the same diameter and weight as 420 pro comps. If anything the weight tolerances are better with the pro comp! Love the pro comps so will like these, just a different name!!

[@ZephrusPrime]

For the X10 parallel -spine 420 shows that the halfout insert is NA all the way from 420 and up. So would size #3 work if the break off point is #3 for a 420?

[@LancasterArcherySupply]

Unfortunately, Easton does not have a halfout that is manufactured for anything above a 380 spine on the Parallel Pro. Technically the #1 halfout would fit into your 420 spine shaft, but the OD gets smaller and smaller the farther you get from 380 spine, so the fitment would not be ideal on the outside of the shaft.

[@ZephrusPrime]

@@LancasterArcherySupply Oh wow that's really sad! Is there a screw insert that can be used with the new X10's so I can use different screw in points?

[@LancasterArcherySupply]

Outside of the halfouts, I do not believe that Easton produces any threaded inserts for the 4mm shafts. Have to stick with glue-in.

[@SjengdeKameel]

Why? A non-barreled X10 is a Pro Comp or an ACG. A budget version of that is a Skylon Preminens/Paragon. I don't get it?

[@liamboyle9199]

There seems to be a focus on the idea of using the X10 building process But in all fairness just save the money and get VAPs or VAP TKOs😂

[@paolomonge4193]

Can you use that arrow with a recurve bow in indoor competition?

[@LancasterArcherySupply]

Yes

[@paolomonge4193]

@@LancasterArcherySupply What are the biggest differences compared to A/C/E? Thanks for the replies!

[@liamboyle9199]

Winningest🤔

[@mikebyford5258]

spot on! pathetic destruction of language

[@johnosborne3864]

It's an ACC with a new label. Right ?

[@mikebyford5258]

apart from price why change from X10 ?

[@wayneeden98]

But if it's rebranded, what is to say they didn't actually redesign the carbon structure, no one can know that, the factory manufacturer isn't going to let something like that out, I prefer to look at it as anything is possible,

[@muhammadsubekhan280]

Mantap sih. Saya sudah pakai anak panah ini keren habis akurasi oke banget

[@quintonb9870]

So a pro comp with a different name! Am i missing something?

[@LancasterArcherySupply]

Yes.....This one comes in 11 spines vs the Pro Comp 6 spines

[@colindakers113]

How is this any different from the ProComp?

[@SeaSaltMud]

I was wondering the same

[@liamboyle9199]

Lil bit straighter

[@enrique6335]

Procomp is just a carbon fiber tube. This one is an aluminum tube with a carbon outer layer, like the rest of the X10s

[@liamboyle9199]

@@enrique6335 incorrect, ProComp is an AC arrow. You're thinking of the ProField which was an all carbon arrow

[@LancasterArcherySupply]

Pro Comp is only made in 6 spines......This one has 11.

[@martinludvik8361]

Hello PJ,I'm very big sorry, I can a question,these arrows are bound to be good for target archery as well as hunting, aren't they? I understood You well, didn't it?🙄🙄🤔🤔🤔 I am still a budding archer from the Czech Republic.😊😊❤❤

[@pjreilly3997]

Yes they are good for both

[@NPC-fl3gq]

Terrible for hunting. Too expensive and too flimsy. If you want an arrow that you can use for both, at least go up to a .204 shaft (better aftermarket stuff is available). A .204 is still skinny enough for outdoor target (unless you're Olympic level good).

[@wayneeden98]

Well,if it's the Pro Comp X10 rebranded, so if they have made more spine models, then what's wrong with that, personally , I have collected the Easton arrow charts over the years, I may be a 30 years of experience of the amateur class, I have learned a lot about the machanics of archery, I have always been able to maintain a realitively good pattern, everyone needs to think, hell everything is pricey, yeah, everyone has their own opinion, I really don't care all that much about Commercialism, my opinionated proof comes from world competition of popularity, cause for what archery being what it is, 85/99% of everyone who shoots an Easton arrow, I don't mind the other brands, I've never seen or had a really bad arrow bad arrow, but I hate it when anyone puts Easton arrows down, other wise you don't know how to shoot,

[@jasonnester9514]

There not that much ore affordable they’re 300$ a dozen the pro tours are 400

[@pjreilly3997]

Lancaster Archery has them for $250….and the pro tour x10s are $481

[@jasonnester9514]

@@pjreilly3997 250&!!!! Rightttt onnn

[@-fazik-3713]

Go Easton! Make more aluminum arrows though ;)

[@jasonnester9514]

Aluminum why

[@anthonyforfare7223]

@@jasonnester9514 more consistent than carbon . That’s why .👍😁🎯🏹

[@jasonnester9514]

@@anthonyforfare7223 u really think ?

[@anthonyforfare7223]

@@jasonnester9514 I know , it’s a well known fact. I worked and have plenty of friends who are still in the industry and everyone knows this to be true. Only down side is the will bend easier than carbon . Love the question though , as I’m a big believer in questioning everything until proven otherwise. Hope you have a Merry Christmas 🎄🎁 & God Bless 🙏😇

[@jasonnester9514]

@@anthonyforfare7223 you to man and I only ask because I just picked up a dozen Easton x27 to try out when u say more consistant u mean as grouping or the arrow specs or both ?

[@giorgosdrag3987]

Ι took this arrows and it is not good.bad quality very fragile and the flight at 70 meters is very bad.