Easy DIY Welcome Sign Scroll Saw Project

FREE SCROLL SAW PATTERN - waylightcreatio...
This is a new series we hope to be doing every Saturday for the foreseeable future titled - Scroll Saw Saturday. This will be a quick-edit video that demonstrates a recent scroll pattern we have created and then cut out on the scroll saw.
These patterns are made available on our website for free. You can download them at the link provided.

[@alienblackgoo_gle]

Watched it at 0.25x speed, to catch the detail; quite hypnotic, and very beautiful!! ❤️

[@aslrunner]

I recently found a Porter Cable scroll saw on NextDoor for $10! I knabbed it up, but I want to learn how to use it and make fun projects. Thanks for this great idea!

[@fiwoodart]

Very nice. I like the idea that it can stand without support.

[@Shopcat22]

Thanks.

[@opasworkshop8373]

awesome job Ryan. nice hand and eye control

[@Shopcat22]

Thanks a lot, Opa. It's a great hand/eye exercise for sure.

[@HobiHolic]

Thank you for the pattern, sir

[@griseldaperez6285]

how did u obtain d pattern ?

[@WTFsLogout]

Easy? Maybe. Talented? Yes!

[@AwesomeWoodThings]

Lots of scroll sawing going on! I like it!

[@Shopcat22]

So I've noticed. I told Amy that Saturday after I posted this. It must be scrolling season.

[@woodtools9760]

Beautiful work. I liked subscribed you

[@annachioffe6454]

Hello. I really liked your video. Please tell me where you purchased your sander (I like how simple and easy it is to use).

[@ekopurwadi]

thanks!! inspired me so much

[@theriggsworkshop8606]

Impressive, im think im might have to copy your idea and make a movie of this for my channel.. Great craftsmanship.

[@barbbombardir8854]

Beautiful!!

[@riftzdistroyz6819]

I'm new to sawing, want to buy one to do this and make words. Can you advise what kind of saw and blades would be good?

[@danthemakerman]

Man that was cool thems a lot of curves.

[@Shopcat22]

Haha, thanks, Dan. Yes, lots.

[@woodworks3585]

Very Nicely Done . I do Like Scrolling myself. You done a great Job here. The end result was Awesome.. Thank you for sharing....... Shared..

[@Shopcat22]

Thanks very much, Terry. Scrolling is my favorite. It is very therapeutic in a way. I kinda get locked in to doing it and just kind of let my mind wander. Until the blade brakes, anyway. Then I almost need a change of pants. lol

[@woodworks3585]

Waylight Creations lmaooooo it's funny because even now after a while scrolling I still jump when the blade breaks :) I might upload some of my older scrolling videos

[@Shopcat22]

Cool. I'd love to see them. Scrolling was the first form of woodworking I fell in love with. First larger tool I bought was a scroll saw. Cut my teeth on it for sure.

[@kimmurray1893]

Hi very nice how do I get a pattern?

[@JackbenchWoodworking]

Really Excellent Work!

[@Shopcat22]

Thanks, man

[@thurmanirving3186]

The link does not take us to a scroll saw site.

[@TyrealH]

I was wondering what the tiny hand grinder/sander was you used at the end? I don't know what it's called, but I desperately want one I googled "sanding pen" and it gives me nail salon equipment...

[@Shopcat22]

Rotary tool or Dremel

[@woodworkerroyer8497]

Man! If this is easy, I'd hate to see what hard difficulty looks like!

[@sword123n]

Awesome! How long did it take u to scroll saw this🤔

[@deathmetalgek666]

The link is no longer active :(

[@phyllistorpy3198]

I need help safari does not recognize this sight and I need to know how or where I can get this pattern please help

[@jccreatives9619]

Awsome. What is the machine name

[@lyudmilagigunov6414]

What kind of blade did u use it here ?

[@roberthavens2611]

Should the blade be bending?

[@miltonbustamante2074]

Podrías ayudarme indicando como construir la máquina caladora para cortar madera y manualidades? Por favor, sube un vídeo. Gracias. Me encantan esos trabajos pero no cuento con la máquina!

[@riztonstudio]

Amazing....😊👍

[@Bekim8310]

Wow awesome video and project! Im a beginner and I'm looking to start some projects. Could you tell me what kind of blade that was and where to find it? Thank you so much!

[@Shopcat22]

It's been a while since we made this, but as of right now we are using Flying Dutchman blades. They have a website that you can search for online. Hope this was helpful.

[@Zioluideecreative]

congratulations, what is the brand of your electric saw?

[@charleswood2252]

Such patience.. awesome

[@Shopcat22]

Thanks, Charles.

[@kenjamieson2135]

Where do I get the pattern from

[@flavacreations]

Links no good site is not found ? 😥

[@LivefreeanddiyTv]

Nice work... that piece is thick enough, you could almost cut it in half and get two signs 🤓 👍🏼

[@Shopcat22]

Haha, indeed I could. It actually gets attached to another project I am working on. So, hopefully the thickness doesn't become a problem. Thanks for watching, Lew.

[@Woodified]

Nice work!

[@Shopcat22]

Thank you very much.

[@davidb1853]

2:55 which is that machine can anyone tell please

[@ESCAGEDOWOODWORKING]

Awesome scroll dude!! Was it a spiral blade though? If so, can you find them at a big box?

[@Shopcat22]

It was a combination of blades. I only used a spiral on a few of the small holes. I hate the spiral blades, but yes... I picked them up at Menards. They are Olson brand. I prefer a thin reverse tooth blade myself, which is what I mostly used throughout. Glad you liked it. Scrolling is my favorite form of woodworking.

[@ESCAGEDOWOODWORKING]

I really dig scroll work..there's lots of project that can be done...beautiful results dude! It's now raining here again, can you believe it?

[@Shopcat22]

Man, you can't catch a break down there. Rain, rain go away... right?

[@ESCAGEDOWOODWORKING]

I've been stuck in it for a week now. Even yesterday at the customers home.

[@xxthegamecollectorxx4673]

save big money at menards... 11% rebate on EVERYTHING

[@JosE.TorreS.]

OLA, GOOD NIGHTS

[@clayguy33]

I guess the tape doesn't gum up the blade? Obviously not. .. ;) Nice work!

[@tomasperez8012]

How can i get d pattern?

[@daxazyasar1494]

Hello, do you have a project for sale? ?

[@MitchellDeitrich]

SO COOL!!! 👍

[@Shopcat22]

Thanks, Mitch.

[@spro957]

Truly amazing work. May I ask what type of would were you using?

[@Shopcat22]

That's a good question. It's been a while. I think it was cherry though.

[@spro957]

Waylight Creations excellent. I will be getting hold of a scroll saw soon and will purchase some cherry wood. 👍

[@cliffcarlo180]

Spell checker

[@McGinnsWoodShop]

Very nice!

[@Shopcat22]

Thank you. And thanks for watching, man.

[@sena8787]

Sir...pls tell me that Tools name

[@edybertogonzalez5710]

What size is the blade

[@pamloveseventplanning]

I love this! How do you come up with the lettering and Design?

[@Shopcat22]

It was a hand-drawn sketch and then cleaned up in Inkscape. Thanks for watching.

[@pamloveseventplanning]

Waylight Creations Awesome, can that be your next video please! Showing how you hand draw your designs then cleaning them up in inkscape! 🙏🏾👍🏾😊

[@Shopcat22]

Actually, we already made a video about that. Check it out here - kzbin.info/www/bejne/bJ2xq56Oq6iDqZY

[@trumpingtrump1023]

question what size blade did you use for that thick wood?

[@Shopcat22]

It's hard to recall, but I typically use a 7R blade on most projects. Which would be .047" skip tooth reverse. Again, I am not 100% sure though.

[@mohamadmoustafa8737]

Good job , How much scroll saw please?

[@marcionascimento9556]

Muito linda o seu trabalho parabéns

[@usernamemykel]

Do you put tape on the back of the stock to help prevent splintering? What blade would you use for 1/8" Baltic Birch plywood? Great job! Liked and subbed.

[@aulivn4jc]

The tape makes removing the glued down paper pattern a lot easier when its finished and heard it helps lubricate the blade.

[@Shopcat22]

I put tape on the back to make removing the template much easier when finished. As far as blade. A #1 or #3 Flying Dutchman blade or equivalent. Thanks for the sub.

[@stanandrada7931]

Hy, I really like your project. Can you please tell me what kind if scroll saw is this? The name please...I want to buy one too. Thank you. Great job!

[@Shopcat22]

The one I used in this video was a Porter Cable.

[@stanandrada7931]

Waylight Creations Thank you for the answer! 😊

[@KostasAnnikasDeftereos]

nice one again !

[@Shopcat22]

Thanks a lot, Kostas. It was a fun scroll project.

[@joaoxiru]

I mean only the cutting part, not the whole machine, where I find only the thread that cuts the wood?

[@Shopcat22]

Oh, sorry. It's not thread. It is a blade.

[@Shopcat22]

www.woodcraft.com/category/pa115-08-01/scroll-saw-blades.aspx

[@retropixel6461]

Hi sir, I hope you can answer my question, I´m using a dremel moto saw, and I have some problems doing the curves, it depends of the kind of blade, or the speed? What do you think, and thanks, nice video

[@Shopcat22]

It should and the thinner the blade the better for this kind of work.

[@Woodcraftedworkshop]

Too cool!

[@Shopcat22]

Thanks a lot.

[@namendonnelly2708]

Nice background music

[@meigian8325]

what's that wood u're use?

[@Shopcat22]

I believe it was oak.

[@harel420]

Waaaaaaaaaaawwwww ,awesome

[@sergiokiwon6688]

very good

[@Shopcat22]

Thank you.

[@Mitermikeswoodshop]

Nice.

[@Shopcat22]

Thanks a bunch for watching.

[@bobleeswoodshop7919]

Neat!!! 👍

[@Shopcat22]

Glad you think so. Thanks for watching.

[@MhAdvance]

nice.....

[@yopyop658]

😯

[@tooljunkie555]

wow man i could never do that..i cant even scroll a circle..lol

[@Shopcat22]

Haha, I don't think I could scroll a circle either. Lots of curves, but not a circle. Thanks for watching, Joe.

[@tooljunkie555]

Waylight Creations always! And yeah it's pretty bad when I tried to scroll a circle and I was using a template I forgot to mention that LOL

[@Shopcat22]

LOL Eh, live and learn, man.

[@manuelvazquez8758]

An M should only have 2 huMps

[@Shopcat22]

Not in cursive English. 3 humps for M and 2 for N (if they are lowercase. Hope that helps.

[@WayneJordan13]

Awesome cool sign indeed!! But sorry to say the video wasn't very enjoyable to watch because it was too fast to really watch.

[@Yadjac]

⚠️🔪🖐